Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Omron SS-5 snap action switch has 200000 cycles electrical life, SPDT switch function, and IP40 sealing. Ideal for applications requiring momentary switch action with 5A@125VAC AC max rating and -25 to 85°C operating temperature range.
Median Price
$1.410
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Distrelec
1+ parts
$1.376
100+ parts
$1.136
1k+ parts
$1.059
10k+ parts
-
RS Americas
$1.130
$1.060
Relay Specialties
$1.440
$1.350
$1.160
Interstate Connecting
$1.446
$1.165
$1.131
Arrow
$1.461
$0.445
DigiKey
$1.490
$0.896
$0.672
Mouser Electronics
$1.680
$1.290
$1.260
Element14
$2.150
$1.000
TTI Europe
$0.874
$0.743
Chip1Stop
$0.802
Farnell
$0.776
Verical
$1.506
$1.435
Toby Electronics
$0.062
$0.039
TTI
$1.250
$1.180
Bürklin Elektronik
$0.710
$0.530
TME
$0.900
$0.800
Nova Conductors
$1.231
Forefront Electronics and Design
$2.450
Vyrian
Electro Sonic
$1.266
$0.934
$0.901
IBS Electronics
$1.795
$1.711
Midan Electronics
ACDS - Activité Composants Distribution Service
SOS electronic
$0.576
$0.547
Resion
Elcom Components
Masline Electronics Inc.
Semicontronic
$0.053
$0.052
$0.051
Continental Prestige Electronics
$1.206
Argo Parts USA
Bastille Electronics
$1.169
$1.111
$1.096
Neutron USA
$65.400
Kepictronics
Authorized Procurement Solutions
Perfect Parts
Abacus Technologies
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
With a high electrical life of 200000 cycles, this switch is durable and reliable for long-term use.
The high insulation resistance of 100000000 ohms ensures minimal leakage current and prevents electrical malfunctions.
With an IP40 sealing rating, this switch is protected against solid objects larger than 1mm, making it suitable for indoor use.
The SPDT switch function allows for multiple wiring configurations, providing versatility in usage.
With a high maximum operating temperature of 85°C, this switch can withstand high heat environments.
The low minimum operating temperature of -25°C ensures reliable operation even in cold environments.
This snap-action and limit switch type provides precise and reliable switching action, ideal for various applications.
With a maximum AC contact current of 5A, this switch is suitable for moderate to high power applications.
The specified operating position of 0.33 inch ensures accurate and consistent actuation of the switch.
The low contact resistance of 30 milliohms ensures efficient electrical conduction and minimal power loss.
Snap Action & Limit Switches SS-5 attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Angle (Actuator):
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
Center Contact Material:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Contact Resistance:
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Dielectric Withstand Volts (V):
Electrical Life:
End Contact Material:
Insulation Resistance:
Mounting Feature:
Maximum Operating Force:
Operating Position:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
SS-5 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
FDLL4148
Fairchild Semiconductor
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
LM358N
Harris Semiconductor
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Changzhou Starsea Electronics
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
DB1CB1AA
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SPHERICAL HEAD TYPE; Maximum DC Contact Voltage: 48 V; Electrical Life: 6000 Cycle(s);
1HS1
Honeywell Sensing And Control
1HS1 by Honeywell Sensing And Control is a SPDT snap action/limit switch with body dimensions of 17.45" x 28.7mm x 49.78mm. It has a max operating temperature of 121°C and can handle up to 1A AC or 25A DC contact current, making it ideal for panel mounting applications requiring precise momentary switch action.
83186001
Crouzet
Crouzet 83186001 is a SNAP ACTING/LIMIT SWITCH with GLASS FILLED POLYBUTYLENE TEREPHTHALATE housing, BRASS terminals, and IP67; IP69 sealing. It operates b/w -40 to 125 °C with SPDT switch function, GOLD plated contacts, and 6A@250VAC AC rating. Ideal for PANEL MOUNT applications requiring reliable snap action and high durability.
D2F-01FL-A
Omron
Omron's D2F-01FL-A snap action switch offers 30000 cycles electrical life, SPDT switch function, and IP40 sealing. With a body width of 6.5in and actuator travel of 0.55mm, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 65°C.
BZE6-2RN28
BZE6-2RN28 by Honeywell is a snap action/limit switch with SPDT function, 15A@480VAC AC max rating, and IP54 sealing. It features a steel roller lever plunger actuator type and is ideal for panel mounting applications requiring momentary switch action. With a compact body size of 77.22mm x 25.4mm x 44.45mm, it offers reliable performance with max DC contact current of 0.5A@125VDC.
V7-2B19E9-048
Honeywell Sensing And Control's V7-2B19E9-048 is a 10.16" wide snap action/limit switch with SPDT function, ideal for panel mounting applications. It offers 11A@277VAC AC max rating and 0.5A@125VDC DC max rating, with a corrosion-proof sealing for durability. The switch has an actuator travel of 9.5mm and a max operating force of 0.23N, making it suitable for various industrial uses.
LSA2B
LSA2B by Honeywell Sensing And Control is a DPDT snap acting/limit switch with EPOXY TERMINAL SEALING (IP65, IP66, IP67). It has a max operating temperature of 121°C and can handle up to 10A@600VAC. Ideal for panel mounting applications requiring momentary switch action in harsh environments.
DG13B1LA
The Cherry
The Cherry DG13B1LA snap action/limit switch has SPDT function, 10000 cycles electrical life, and 3A@125VAC AC max rating. With a body width of 5.8 inch and height of 6.5 mm, it's ideal for applications requiring precise ON-(ON) contact function in temperatures ranging from -25 to 85 °C.
D4NL-1DFG-B
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4NL;
DB1CC1RB
The Cherry's DB1CC1RB snap action/limit switch has SPDT switch function, 6000 cycle electrical life, and 5A@250VAC AC max rating. With polyester housing and brass terminals, it is ideal for applications requiring a compact design with high durability and precise switching capabilities.
D2F-FL
Omron's D2F-FL snap action switch has an electrical life of 30k cycles, SPDT switch function, and IP40 sealing. With a body width of 5.8in and height of 6.5mm, it is ideal for applications requiring momentary switch action in environments with temperatures ranging from -25 to 65°C.
V7-1C28E9
Honeywell Sensing And Control's V7-1C28E9 is a 10.16" snap action switch with SPST function, ideal for panel mounting applications. It offers a max AC contact current of 15.1A@277VAC and DC contact current of 0.5A@125VDC, with an actuator travel of 2.46mm and quick connect termination type.
1LS1-4C
1LS1-4C by Honeywell is a SPDT snap action/limit switch with max. AC contact current of 0.8A@480VAC and DC contact current of 0.8A@550VDC. It has a side rotary actuator, operates b/w -29°C to 71°C, and is ideal for panel mounting applications requiring momentary switch action.
BZ-RX
BZ-RX by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC max rating. It features a plastic plunger actuator, 0.68mm actuator travel, and 2.5N max operating force. Ideal for panel mounting applications requiring precise switching capabilities in industrial settings.
LSXA3K-2C
LSXA3K-2C by Honeywell Sensing And Control is an explosion-proof SPDT snap action/limit switch with a side rotary actuator. It has a max operating temperature of 121°C and min of -12°C, suitable for panel mounting applications. With a max DC contact voltage of 250V and AC contact voltage of 600V, it offers reliable performance in various industrial settings.
BZ-RSX
BZ-RSX by Honeywell Sensing And Control is a SPDT snap action/limit switch with 15A@480VAC AC max rating. Featuring a hardened steel plunger actuator, it has a body width of 17.45 inch and max DC contact current of 0.5 A. Ideal for panel mounting applications requiring precise switching capabilities.
DC1CA1LB
DC1CA1LB by The Cherry is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It features a POLYESTER housing, COPPER ALLOY terminals, and SILVER OVER NICKEL plating. With an IP67 sealing rating, it's ideal for applications requiring a 6.5 inch wide switch with 6000 cycle electrical life.
D2D-3104
The Omron D2D-3104 is a DPST snap acting/limit switch with 4A@380VAC AC max rating, 100000 cycle electrical life, and IP40 sealing. It features a plunger actuator type with 2.3mm travel, suitable for panel mounting applications requiring momentary switch action at temperatures ranging from -25 to 85°C.
Z-15GW-B
Omron Z-15GW-B is a SPDT snap action switch with 500000 cycles electrical life. It has a max AC contact current of 15A and operates b/w -25 to 80°C. With HINGE LEVER actuator, it's ideal for panel mounting applications requiring momentary switch action.
BZE6-2RN-S
Honeywell Sensing And Control's BZE6-2RN-S is a 25.4mm wide snap action switch with IP66 sealing, SPDT function, and 15A@480VAC AC rating. Ideal for panel mounting applications requiring a plunger actuator with 7.54mm travel and 6.67N operating force in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SS-5GL2
Omron SS-5GL2 is a SPDT snap acting/limit switch with 200000 cycles electrical life. It has a max AC contact current of 5A@125VAC and operates b/w -25 to 85 °C. With HINGE ROLLER LEVER actuator, it is ideal for panel mounting applications requiring momentary switch action.
SS-5GL2T
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Maximum DC Contact Current: 5 A; Maximum Pre Travel: 1.2 mm;
SS-5GL
Omron SS-5GL is a SPDT snap action/limit switch with 200000 cycles electrical life. With IP40 sealing, it operates b/w -25 to 85°C and handles up to 5A@125VAC. Ideal for panel mounting applications, its hinge lever actuator offers 2mm travel and requires only 0.49N max operating force.
SS-5GL2D
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; AC Maximum Rating R Load (Contact): 5A@125VAC; Electrical Life: 200000 Cycle(s);
SS-5GL2-F
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Termination Type: SOLDER; DC Maximum Rating R Load (Contact): 5A@14VDC;
SS-5GL2-FT
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Body Width: 6.4 inch; Maximum AC Contact Voltage: 125 V;
SS-5GL2-FD2
Omron SS-5GL2-FD2 is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring HINGE ROLLER LEVER actuator, it has 5A@125VAC AC max rating and -25 to 85°C operating temp range. Ideal for applications requiring precise momentary switching in compact spaces.
SS-5GL2-F-3T
SNAP ACTING/LIMIT SWITCH;
SS-5GL2-FD
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; Termination Type: SOLDER; Body Length/Diameter: 19.8 mm;
SS-5GL2-3T
SS-5GLT
Omron SS-5GLT is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring HINGE LEVER actuator, it has IP40 sealing and operates b/w -25 to 85°C. Ideal for panel mounting applications, it offers 5A@125VAC AC max rating and 0.49N max operating force.
SS-5GL111-F
SS-5GL13D
Omron SS-5GL13D is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP40 sealing, it operates b/w -25°C to 85°C. With a max AC contact current of 5A@125VAC, it is ideal for applications requiring momentary switch action and simulated roller lever actuator travel of 2mm.
SS-5GL111-FT
SS-5GL2D2
SNAP ACTING/LIMIT SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: SPDT; Type (Actuator): HINGE ROLLER LEVER; DC Maximum Rating R Load (Contact): 5A@14VDC; Actuator Travel (mm): 2;
SS-5GLD
Omron SS-5GLD is a SPDT snap action/limit switch with 2A@250VAC AC rating, 200000 cycles electrical life, and IP40 sealing. It features HINGE LEVER actuator type for applications requiring momentary switch action in temperatures ranging from -25 to 85 °C.
SS-5GL13T
Omron SS-5GL13T is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP40 sealing, it operates b/w -25 to 85°C temperatures. With a max AC contact current of 5A@125VAC, it is ideal for panel mounting applications requiring momentary switch action.
SS-5GL111-FD
SS-5GL13
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): SIMULATED ROLLER LEVER; Body Width: 6.4 inch; Actuator Travel (mm): 2;
SS-5GL111-F-3T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved