Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.
Add filters
All
Selected
TPS652510RHAT
Texas Instruments
TPS652510RHAT by Texas Instruments is a 40-terminal switching regulator with a max output current of 3A and a control mode of current-mode PWM. It operates in industrial temperature grades, with a wide input voltage range from 4.5V to 16V, making it suitable for various power management applications.
PFM CONTROL TECHNIQUE ALSO POSSIBLE
SWITCHING REGULATOR
CURRENT-MODE
PULSE WIDTH MODULATION
16 V
4.5 V
12 V
S-PQCC-N40
e4
6 mm
3
1
40
85 Cel
-40 Cel
3 A
15 V
.8 V
PLASTIC/EPOXY
HVQCCN
LCC40,.24SQ,20
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
260
Not Qualified
1 mm
Switching Regulator or Controllers
YES
BUCK
2200 kHz
INDUSTRIAL
NICKEL PALLADIUM GOLD
NO LEAD
.5 mm
QUAD
30
TPS65257RHAT
TPS65257RHAT by Texas Instruments is a 40-terminal switching regulator with a max output current of 3A and a control mode of current-mode PWM. It operates in industrial temperature grades, with a wide input voltage range from 4.5V to 16V, making it suitable for various power management applications.
BQ24130RHLT
BQ24130RHLT by Texas Instruments is a 20-terminal chip carrier with PWM control technique, suitable for industrial applications. It operates b/w -40 to 85°C, with a max output current of 4A and switching frequency of 700kHz. Ideal for battery charge control in compact designs requiring up to 17V input voltage.
BATTERY CHARGE CONTROLLER
17 V
R-PQCC-N20
4.5 mm
2
20
4 A
13.5 V
6 V
LCC20/24,.14X.18,20
RECTANGULAR
4.5/17
Power Management Circuits
700 kHz
Nickel/Palladium/Gold (Ni/Pd/Au)
NOT SPECIFIED
3.5 mm
TPS61254YFFT
TPS61254YFFT by Texas Instruments is a switching regulator with max output current of 2.4A, operating temp range -40 to 85°C, and boost switcher config. Ideal for industrial applications requiring precise voltage regulation in compact spaces due to its fine pitch grid array package style.
ALSO HAS PFM CONTROL TECHNIQUE
4.35 V
2.5 V
3.6 V
S-PBGA-B9
e1
1.6 mm
9
2.4 A
VFBGA
BGA9,3X3,16
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
.625 mm
BOOST
3500 kHz
TIN SILVER COPPER
BALL
.4 mm
BOTTOM
TPS84410RKGT
TPS84410RKGT by Texas Instruments is a 39-terminal switching regulator with VOLTAGE-MODE control, operating b/w -40 to 85 °C. It offers a max output voltage of 3.6V and current of 4A, suitable for industrial applications requiring efficient power management in compact spaces.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 3.6V
VOLTAGE-MODE
2.95 V
3.3 V
R-PQCC-N39
11 mm
39
HQCCN
LCC39(UNSPEC)
CHIP CARRIER, HEAT SINK/SLUG
250
2.9 mm
600 kHz
.9 mm
9 mm
TPS40422RHAT
TPS40422RHAT by Texas Instruments is a 40-terminal switching regulator with a max output current of 60A and a control mode of voltage-mode. With a package style of chip carrier, it is ideal for automotive applications requiring high efficiency and precise voltage regulation up to 5.6V.
OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.6V; 6.5 VOLT OUTPUT ALSO AVAILABLE
DUAL SWITCHING CONTROLLER
20 V
S-XQCC-N40
125 Cel
60 A
5.6 V
.6 V
UNSPECIFIED
PHASE-SHIFT
1000 kHz
AUTOMOTIVE
NCP4303BMNTWG
Onsemi
NCP4303BMNTWG by Onsemi is a switching controller with boost configuration. It operates in automotive temperature grade range (-40 to 125 °C) and supports input voltage from 9.5V to 28V. With resonant control technique, it achieves a max switching frequency of 500kHz, making it ideal for power management applications.
SWITCHING CONTROLLER
RESONANT CONTROL
28 V
9.5 V
S-PDSO-N8
e3
4 mm
8
HVSON
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
500 kHz
TIN
.8 mm
DUAL
ADP1047ARQZ-R7
Analog Devices
ADP1047ARQZ-R7 by Analog Devices is a 24-terminal switching regulator with a control mode of current-mode and PWM technique. It operates at an industrial temperature range from -40 to 85°C, with a max switching frequency of 400 kHz. Ideal for power factor control applications due to its boost configuration and nominal input voltage of 3.3V.
POWER FACTOR CONTROLLER
3 V
R-PDSO-G24
8.66 mm
24
SOP
SSOP24,.24
SMALL OUTLINE
3.3
1.75 mm
37 mA
400 kHz
MATTE TIN
GULL WING
.635 mm
3.91 mm
ADP1048ARQZ-R7
ADP1048ARQZ-R7 by Analog Devices is a current-mode switching regulator with boost configuration. It operates b/w -40 to 85°C, suitable for industrial applications. With a max switching frequency of 400 kHz and input voltage range of 3-3.6 V, it's ideal for power factor control in compact designs.
NCP6251MNR2G
NCP6251MNR2G by Onsemi is a 48-terminal switching controller with PWM control technique, operating at 5V input voltage and 1000 kHz frequency. Ideal for applications requiring push-pull switcher configuration in commercial temperature grade environments.
5.25 V
4.75 V
5 V
S-XQCC-N48
7 mm
48
70 Cel
0 Cel
PUSH-PULL
COMMERCIAL
ST1S30IPUR
STMicroelectronics
ST1S30IPUR by STMicroelectronics is a switching regulator with 5.1A output current, 1800kHz max frequency, and 85 °C max operating temp. Ideal for applications requiring efficient power conversion in compact spaces like consumer electronics and industrial automation.
5.5 V
2.7 V
-30 Cel
5.1 A
SOLCC8,.15,32
1800 kHz
OTHER
ADP5034ACPZ-1-R7
Analog Devices' ADP5034ACPZ-1-R7 is a switching regulator with 24 terminals, operating at -40 to 125 °C. It offers a max output current of 2.3 A and supports input voltages from 2.3 V to 5.5 V, making it ideal for automotive applications requiring efficient power supplies up to 1.2 V at a frequency of 3500 kHz.
ALSO OPERATES AT 3.3V, 1.8, AND 2.8VOLT OUTPUT, ALSO OPERATES AS LDO REGULATOR
2.3 V
S-XQCC-N24
2.3 A
1.2 V
LCC24,.16SQ,20
1.8/5,2.5/5
DMOS
AP8800AWT-7
Diodes Incorporated
AP8800AWT-7 by Diodes Inc. is a switching regulator with 5 terminals, operating at -40 to 105°C. It has a max output current of 0.45A and operates in buck configuration at a frequency of up to 600kHz. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
8 V
R-PDSO-G5
5
105 Cel
.45 A
VSSOP
SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH
.95 mm
NCP1927DR2G
NCP1927DR2G by Onsemi is a current-mode boost switching regulator with 12V nominal voltage, 70 kHz max switching frequency, and 6.4 mA max supply current. It is ideal for power factor control applications due to its compact small outline package and pulse width modulation control technique.
ALSO HAS CONTROL TECHNIQUE OF PFM
30 V
10 V
R-PDSO-G16
9.9 mm
16
SOP16,.25
12
6.4 mA
70 kHz
1.27 mm
3.9 mm
TPS62170DSGT
TPS62170DSGT by Texas Instruments is a switching regulator with a nominal input voltage of 12V and max output current of 0.5A. Operating in hysteric current mode, it has a max switching frequency of 2250 kHz and is ideal for industrial applications requiring efficient power management in compact spaces.
ADJST O/P VOLT FRM 0.9V TO 6V; ALS OPRTS IN VOLT MODE AND PWM CTRL TECHNQ ALS POSBL
HYSTERETIC CURRENT MODE
2 mm
.5 A
.9 V
SOLCC8,.08,20
2250 kHz
TPS62141RGTR
TPS62141RGTR by Texas Instruments is a switching regulator with a max output current of 2A and max operating temp of 85°C. Ideal for industrial applications, it operates in hysteric current mode with a switching frequency of up to 2500 kHz. With a compact chip carrier package style, it offers precise voltage regulation from 3V to 17V input range.
ALSO OPERATES IN VOLT MODE AND PWM CTRL TECHNIQUE ALSO POSBL
S-PQCC-N16
3 mm
2 A
1.8 V
2500 kHz
TPS62141RGTT
TPS62141RGTT by Texas Instruments is a switching regulator with 16 terminals, operating b/w -40 to 85°C. It offers a max output current of 2A at 1.8V, suitable for industrial applications requiring precise voltage regulation and efficient power management in compact spaces. With a control mode of current-mode and hysteric current technique, it ensures stable performance under varying load conditions.
A5975AD
A5975AD by STMicroelectronics is a switching regulator with 4.1A output current, 575kHz max switching frequency, and voltage-mode control technique. Ideal for automotive applications due to its low profile design, it operates b/w -40 °C to 125°C temperature range and supports input voltages from 4V to 36V.
OUTPUT VOLTAGE ADJUSTABLE FROM 1.235 V TO 35 V
36 V
4 V
R-PDSO-G8
4.9 mm
4.1 A
HLSOP
SOP8,.25
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
1.7 mm
575 kHz
Matte Tin (Sn)
A5975D
STMicroelectronics A5975D is a switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 5.25A and supports voltage-mode control at a frequency of up to 280kHz. Ideal for automotive applications due to its low profile and small outline package style.
5.25 A
280 kHz
ST2S08BPQR
ST2S08BPQR by STMicroelectronics is a 12-terminal switching regulator with a max output current of 1.5A and max switching frequency of 1800kHz. It operates on a nominal input voltage of 5V, suitable for applications requiring high-frequency power conversion in compact spaces.
ADJUSTABLE OUTPUT VOLTAGE FROM 0.8V TO 10.175V
S-XQCC-N12
1.5 A
LCC12,.16SQ,32
TPS43350QDAPRQ1
TPS43350QDAPRQ1 by Texas Instruments is a dual switching controller with a max output current of 6A and a control technique of pulse width modulation. It operates in automotive applications, with a temperature range from -40 to 125°C, making it suitable for harsh environments. The package style is small outline, heat sink/slug, thin profile, shrink pitch.
OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 11V, ALSO HAS CONTROL TECHNIQUE OF PFM
40 V
13 V
R-PDSO-G38
12.5 mm
38
6 A
11 V
5.8 V
HTSSOP
TSSOP38,.32
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
AEC-Q100
1.2 mm
.65 mm
6.1 mm
TPS54229DDA
TPS54229DDA by Texas Instruments is a switching regulator with a 2A output current and 650 kHz max switching frequency. It operates b/w -40 to 85°C, suitable for industrial applications. With VOLTAGE-MODE control mode and BUCK switcher config, it's ideal for power management in various electronic devices.
OPERATES IN ADJUSTABLE MODE FROM 0.76 TO 7V
18 V
7 V
.76 V
650 kHz
TPS54294PWP
DUAL SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
5 mm
TSSOP16,.25
2.5 mA
4.4 mm
TPS54295PWP
TPS54295PWP by Texas Instruments is a dual switching controller with a max output current of 2A and a max input voltage of 18V. It operates in voltage-mode control technique with a max switching frequency of 700kHz, suitable for industrial applications requiring efficient power regulation.
2 mA
TPS84610RKGT
TPS84610RKGT by Texas Instruments is a voltage-mode switching regulator with a max output current of 6A and a max switching frequency of 2kHz. It operates in industrial temperature grades, making it suitable for various applications requiring efficient power management in compact spaces. With a wide input voltage range from 2.95V to 6V, this chip carrier package is ideal for industrial automation and control systems.
10 mm
2000 kHz
A5974ADTR
A5974ADTR by STMicroelectronics is a switching regulator with 8 terminals, operating at -40 to 125 °C. It has a max output current of 3.5 A and supports pulse width modulation control technique. Ideal for automotive applications due to its AEC-Q100 screening level and small outline package style.
S-PDSO-G8
3.5 A
35 V
1.235 V
A5974AD
A5974AD by STMicroelectronics is a switching regulator with 8 terminals, operating at -40 to 125 °C. It has a max output current of 3.5 A and supports pulse width modulation control technique. Ideal for automotive applications due to its AEC-Q100 screening level and compact square package design.
PM8803
PM8803 by STMicroelectronics is a switching controller with current-mode control technique. It operates in industrial temperature range (-40 to 85 °C) and has a max switching frequency of 1MHz. With a nominal input voltage of 48V, it is suitable for various applications requiring high-frequency power conversion.
32.5 V
48 V
R-PDSO-G20
6.5 mm
TSSOP20,.25
SINGLE
ADP1876ACPZ-R7
ADP1876ACPZ-R7 by Analog Devices is a 32-terminal switching regulator with a max operating temperature of 85°C. It features current-mode control, pulse width modulation, and a max switching frequency of 690 kHz. Ideal for industrial applications requiring a dual switching controller with nominal input voltage of 12V and output voltage of 5V.
LSO OPERATES AS LDO REGULATOR, OPERTAES IN ADJUSTABLE MODE FROM 0.6 TO 18 V
2.75 V
S-XQCC-N32
32
LCC32,.2SQ,20
690 kHz
TPS54329DDA
TPS54329DDA by Texas Instruments is a voltage-mode switching regulator with 3A output current, 650kHz max switching frequency, and 85°C max operating temp. Ideal for industrial applications requiring a compact design, it operates b/w -40 to 85°C with input voltages from 4.5V to 18V and outputs at a nominal voltage of 5.5V.
TPS53355DQPT
TPS53355DQPT by Texas Instruments is a switching regulator with 30A output current, 5.5V max output voltage, and 1000kHz max switching frequency. Ideal for industrial applications requiring a compact design and efficient power management in temperature-sensitive environments.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.5V, ALSO OPERATES AS LDO REGULATOR
1.5 V
R-PDSO-N22
22
30 A
SON
1.5 mm
BUCK-BOOST
TPS62623YFDR
TPS62623YFDR by Texas Instruments is a switching regulator with max output current of 0.6A, operating temp range -40 to 85°C, and max switching frequency of 6600 kHz. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
R-PBGA-B6
6
.6 A
1.225 V
6600 kHz
Tin/Silver/Copper (Sn/Ag/Cu)
1.1 mm
TPS62623YFDT
TPS62623YFDT by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.6A and a max switching frequency of 6600 kHz. It operates in industrial temperature grade range (-40 to 85°C) and is suitable for applications requiring precise voltage regulation in compact electronic devices.
TPS82690SIPR
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
ALSO HAS A CONTROL TECHNIQUE OF PFM
4.8 V
R-XBGA-B8
2.85 V
VBGA
BGA8,3X3,40/32
GRID ARRAY, VERY THIN PROFILE
4400 kHz
2.3 mm
TPS82697SIPT
TPS82697SIPT by Texas Instruments is a VOLTAGE-MODE SWITCHING REGULATOR with 0.8A output current, 3300 kHz switching frequency, and 2.85V nominal output voltage. Ideal for industrial applications requiring a compact GRID ARRAY package with very thin profile and operating temperatures from -40 to 85°C.
.8 A
2.8 V
3300 kHz
UCC28220QDRQ1
UCC28220QDRQ1 by Texas Instruments is a dual switching controller with a control mode of current-mode and pulse width modulation. It operates in automotive-grade conditions with a nominal input voltage of 12V, output voltage of 3.3V, and max switching frequency of 1100 kHz. Ideal for applications requiring efficient power management in compact spaces.
14.5 V
.1 A
3.45 V
3.15 V
6 mA
8.4 V
1100 kHz
BICMOS
NCP6334CMTAATBG
NCP6334CMTAATBG by Onsemi is a VOLTAGE-MODE switching regulator with 3.3 A output current and 3300 kHz switching frequency. Ideal for industrial applications, it operates b/w -40 to 85 °C with a small outline package style and matte tin terminal finish.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.5V; PFM CONTROL TECHNIQUE ALSO POSSIBLE
3.3 A
NCP6914AFCAT1G
NCP6914AFCAT1G by Onsemi is a 20-terminal switching regulator with a nominal voltage of 3.6V, operating temperature range from -40 to 85 °C. It features a max output current of 1.6A and operates at a max switching frequency of 3300 kHz. Ideal for industrial applications requiring precise power management in compact spaces.
ALSO OPERATES IN ADJUSTABLE MODE FROM 1 TO 3.3V; PFM CONTROL TECHNIQUE ALSO POSSIBLE
R-PBGA-B20
2.05 mm
1.6 A
BGA20,4X5,16
3.6
.6 mm
.19 mA
1.76 mm
NCP6914AFCDT1G
NCP6914AFCDT1G by Onsemi is a 20-terminal switching regulator with a max output current of 1.6A and a PWM control technique. It operates b/w -40 to 85 °C, making it suitable for industrial applications requiring precise power supplies up to 3.6V in a compact grid array package.
TB7109F(TE12L,Q)
Toshiba
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HSOF; Package Shape: SQUARE; Surface Mount: YES;
27 V
24 V
S-PDSO-F8
.4 A
HSOF
FL8,.2
SMALL OUTLINE, HEAT SINK/SLUG
480 kHz
BCDMOS
FLAT
TB7110F(TE12L,Q)
MP8716EN-LF
Monolithic Power Systems
MP8716EN-LF by Monolithic Power Systems is a current-mode switching regulator with a buck switcher config. It operates b/w -20 to 85°C, with input voltage ranging from 4.5V to 21V and a max switching frequency of 2MHz. Ideal for applications requiring efficient power conversion in compact spaces.
ADJUSTABLE OUTPUT FROM 0.8V
21 V
-20 Cel
MP8718EN-LF-Z
MP8718EN-LF-Z by Monolithic Power Systems is a current-mode switching regulator with 8 terminals, operating b/w -20 to 85°C. It features a buck switcher configuration, PWM control technique, and can handle input voltages from 4.5V to 21V. Ideal for applications requiring high-frequency operation in compact spaces.
TPS62132RGTT
TPS62132RGTT by Texas Instruments is a 16-terminal switching regulator with VOLTAGE-MODE control, operating b/w -40 to 85°C. It offers a max output current of 3A at a frequency of 2500 kHz, suitable for industrial applications requiring stable 3.3V output voltage in compact spaces.
ALSO OPERATES IN CURRENT MODE
LCC16,.12SQ,20
TPS54329EDDA
TPS54329EDDA by Texas Instruments is a switching regulator with 3A output current, 650kHz max switching frequency, and VOLTAGE-MODE control. It is ideal for industrial applications requiring a compact design with a low profile and dual terminal position. The package style is SMALL OUTLINE, HEAT SINK/SLUG, making it suitable for space-constrained environments.
NCL30160DR2G
NCL30160DR2G by Onsemi is a current-mode switching regulator with 1.5A output, PWM control technique, and 1400kHz max frequency. Ideal for automotive applications due to its -40 to 125°C temp range, BUCK switcher config, and small outline package style.
6.3 V
1400 kHz
TPS62151RGTR
TPS62151RGTR by Texas Instruments is a switching regulator with a 1A output current and 2500 kHz max switching frequency. It operates in industrial temperature range (-40 to 85°C) and supports input voltages from 3V to 17V, making it ideal for various power management applications. The chip carrier package style with very thin profile and no-lead terminal form enhances its versatility in compact designs.
CURRENT/VOLTAGE-MODE
1 A
TPS62151RGTT
TPS62151RGTT by Texas Instruments is a switching regulator with 1A max output current, 2500 kHz max switching frequency, and 1.8V nominal output voltage. Ideal for industrial applications requiring efficient power conversion in a compact form factor.
© 2023 All rights reserved
