Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ST1S30IPUR by STMicroelectronics is a switching regulator with 5.1A output current, 1800kHz max frequency, and 85 °C max operating temp. Ideal for applications requiring efficient power conversion in compact spaces like consumer electronics and industrial automation.
Median Price
$0.848
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.280
1k+ parts
$1.150
10k+ parts
$1.080
Chip1Stop
$0.869
Avnet
Arrow
$0.826
Verical
Digiode
$1.054
Vyrian
Anansix
Component Stockers USA
$0.690
Corphita
$0.999
AZTECH Wire
$5.110
$4.910
$4.810
$4.710
Microchip USA
$6.839
IDEA Electronic Components Group
$12.125
$10.912
MKK Technologies
$22.800
DigiPath Technology Company
Kepictronics
Perfect Parts
Authorized Procurement Solutions
Parana Technologies
$14.497
This material provides durability and good thermal resistance, making the product suitable for a wide range of operating temperatures.
Enables easy installation on circuit boards, saving time and effort during assembly.
High output current capability allows the product to handle power requirements for various applications efficiently.
Pulse width modulation provides precise control over the output voltage, ensuring stability and efficiency in regulating power.
High switching frequency enables fast response and regulation, contributing to better performance of the switching regulator.
Switching Regulators & Controllers ST1S30IPUR attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
ST1S30IPUR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - IPG-IPC/14/8692 03/Oct/2014
PCN Packaging - Moisture Barrier Bag 09/May/2016
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
RC0805FR-0710KL
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Bharat Electronics
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
Swampscott Electronics
Weitron Technology
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LT1054CS8#PBF
Linear Technology
SWITCHED CAPACITOR REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54061DRBR
TPS54061DRBR by Texas Instruments is a switching regulator with a max output voltage of 58V and a max output current of 0.2A. It operates in buck configuration, has a control mode of current-mode, and uses pulse width modulation for control technique. This IC is suitable for automotive applications due to its temperature grade and can handle input voltages ranging from 4.7V to 60V.
LM2678SX-ADJ/NOPB
LM2678SX-ADJ/NOPB by Texas Instruments is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and output voltage ranging from 1.23V to 37V. It is used in automotive applications for regulating voltage efficiently up to 5A with a max input voltage of 40V and PWM control technique at a frequency of up to 260kHz.
LM5017MRX/NOPB
LM5017MRX/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output voltage up to 90V. It is ideal for automotive applications due to its small size, high efficiency (up to 0.6A output current), and wide input voltage range from 7.5V to 100V.
TPS5430DDA
TPS5430DDA by Texas Instruments is a voltage-mode switching regulator with 3A output current, 1.23V min output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact rectangular package design.
LTM8074IY#PBF
Analog Devices
LTM8074IY#PBF by Analog Devices is a switching regulator with 25 terminals, operating temperature range of -40 to 125°C, and max frequency of 2200 kHz. Ideal for automotive applications due to its fine pitch grid array package style and pulse width modulation control technique.
LM5117PMHE/NOPB
LM5117PMHE/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating b/w -40 to 125°C. It supports a max output voltage of 62V and current up to 20A, ideal for automotive applications due to its compact size and pulse width modulation control mode. With a switching frequency of 750kHz, it efficiently converts input voltages from 5.5V to 65V into outputs as low as 0.8V.
LM25116MHX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT8650SIV#PBF
LT8650SIV#PBF by Analog Devices is a 32-terminal switching regulator with a max input voltage of 42V and operating temperature range from -40 to 125°C. It features a control mode of current-mode, pulse width modulation technique, and phase-shift switcher configuration. Ideal for automotive applications due to its compact chip carrier package style and high switching frequency of 3000 kHz.
LTC3114IFE-1#PBF
LTC3114IFE-1#PBF by Analog Devices is a switching regulator with 2.3A output current, 1400kHz max switching frequency, and 24V nominal input voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with small outline package style.
LM5008AMMX/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G8;
TPS54260DRCR
TPS54260DRCR by Texas Instruments is a switching regulator with 2.5A output current, 2500 kHz max switching frequency, and 58V max output voltage. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package design.
E-L5973D
STMicroelectronics
E-L5973D by STMicroelectronics is a small outline, low profile switching regulator with 8 terminals. It operates in automotive temperature grade range (-40 to 125°C) and supports input voltage from 4V to 36V. With a max output current of 3.5A and switching frequency of 280kHz, it is ideal for buck converter applications.
TPS40055PWPR
TPS40055PWPR by Texas Instruments is a voltage-mode switching controller with a max output current of 20A and a max output voltage of 35V. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring high efficiency and precision control. The compact rectangular package style with gull wing terminals and push-pull switcher configuration enables space-saving designs in electronic devices.
LTM4644EY#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 77; Package Code: BGA; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS55340QRTERQ1
TPS55340QRTERQ1 by Texas Instruments is a 16-terminal switching regulator with 3-38V output voltage range. Ideal for automotive applications, it operates b/w -40 to 125°C, supports up to 7.75A output current, and uses pulse width modulation control technique at a max frequency of 2500 kHz.
L7987LTR
L7987LTR by STMicroelectronics is a voltage-mode switching regulator with 16 terminals, operating at a max frequency of 1650 kHz. With a max output current of 3.45 A and input voltage range from 4.5 V to 61 V, it is ideal for applications requiring efficient power conversion in compact spaces.
LM2674M-5.0
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2674M-3.3/NOPB
LTC3646IDE#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ST1S06PUR
ST1S06PUR by STMicroelectronics is a 6-terminal switching regulator with a max output current of 1.5A and a control mode of current-mode PWM. It operates as a buck switcher with a max switching frequency of 1800kHz, suitable for applications requiring efficient voltage regulation in compact spaces.
ST1S10PHR
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: SOP8,.25;
ST1S14PHR
ST1S14PHR by STMicroelectronics is a switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 5.2 A and supports pulse width modulation control technique. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and high switching frequency of up to 1000 kHz.
ST1S10PUR
ST1S10PUR by STMicroelectronics is a current-mode switching regulator with 3A output current and 1100kHz max frequency. Ideal for applications requiring small outline, heat sink, and thin profile packages. Operates in buck configuration with input voltage range of 2.5V to 18V, making it suitable for various power management systems.
ST1S09IPUR
ST1S09IPUR by STMicroelectronics is a current-mode switching regulator with 3.5A output, 1800kHz max frequency, and BUCK configuration. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline package style and low profile design.
ST1S06PU33R
ST1S06PU33R by STMicroelectronics is a current-mode switching regulator with 6 terminals, offering a max output current of 1.5A and a nominal output voltage of 3.3V. With a compact square package style and very thin profile, it is ideal for applications requiring efficient power management in limited space, such as portable electronic devices. Operating at a max switching frequency of 1800 kHz, this buck switcher supports input voltages ranging from 4.2V to 6V, making it suitable for various battery-powered systems.
ST1S12G18R
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ST1S03PUR
ST1S03PUR by STMicroelectronics is a 6-terminal switching regulator with a max output current of 1.5A and a control mode of current-mode PWM. It operates in buck configuration, supports input voltages from 3V to 16V, and has a compact square package suitable for various applications requiring efficient power management.
ST1S41PHR
ST1S41PHR by STMicroelectronics is a switching regulator with max output current of 7A, operating temp range -40 to 125°C, and max switching frequency of 1000 kHz. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and efficient pulse width modulation control technique.
ST1S09PUR
ST1S09PUR by STMicroelectronics is a switching regulator with 3.5A output current, 1800kHz max frequency, and BUCK switcher config. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline package style and low profile design.
ST1S12G12R
ST1S40IDR
ST1S40IDR by STMicroelectronics is a switching regulator with max output current of 6A and max switching frequency of 1000kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, with input voltage range from 4V to 18V.
ST1S12GR
ST1S06APUR
SWITCHING REGULATOR; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES; Minimum Input Voltage: 4.2 V;
ST1S40IPUR
ST1S40IPUR by STMicroelectronics is a switching regulator with max output current of 6A and max switching frequency of 1000kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring pulse width modulation control technique in a small outline package.
ST1S41PUR
ST1S41PUR by STMicroelectronics is a switching regulator with max output current of 7A and max switching frequency of 1000kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring a buck switcher config and pulse width modulation control technique.
ST1S32PUR
ST1S32PUR by STMicroelectronics is a current-mode switching regulator with 4A output current, 1900 kHz switching frequency, and 5.5V max input voltage. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package design.
ST1S06PU12R
ST1S06PU12R by STMicroelectronics is a 6-terminal switching regulator with a max output current of 1.5A and a max switching frequency of 1800 kHz. It operates in buck configuration, suitable for applications requiring a nominal input voltage of 5V and nominal output voltage of 3.3V.
ST1S40IPHR
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ST1S03PM
SWITCHING REGULATOR; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES; Nominal Input Voltage: 5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved