Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ST1S41PUR by STMicroelectronics is a switching regulator with max output current of 7A and max switching frequency of 1000kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring a buck switcher config and pulse width modulation control technique.
Median Price
$1.471
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$1.780
100+ parts
$1.080
1k+ parts
$0.950
10k+ parts
$0.908
Newark
$2.220
$1.380
$1.230
-
Mouser Electronics
$2.390
$1.440
$1.270
$1.200
Element14
$3.040
$1.850
$1.700
$1.670
Arrow
$1.162
Verical
$0.945
Chip1Stop
$0.851
Avnet
DigiKey
$1.066
Nova Conductors
$1.156
Digiode
$1.302
Vyrian
Chip Stock
Anansix
Argo Parts USA
Netroflash
$1.099
$1.076
Advanced Electronics
$1.180
Corphita
$1.233
Continental Prestige Electronics
$1.400
$0.952
Ampacity Inc.
$1.550
Vigor
$1.720
Corohmni
$5.606
IDEA Electronic Components Group
$22.444
$20.200
Aztec Data Supply Inc.
$22.764
MKK Technologies
$42.205
DigiPath Technology Company
Lixinc
Authorized Procurement Solutions
Microchip USA
A-Z Elektronik GmbH
Kepictronics
Perfect Parts
Parana Technologies
$26.836
The use of plastic/epoxy material ensures durability and reliability.
This feature allows for easy installation and saves PCB space.
The square shape makes it easy to place and secure on the PCB.
With 8 terminals, this product offers flexibility in connections and applications.
The small outline design makes it suitable for compact designs.
With a high operating temperature, this product can withstand harsh conditions.
The current-mode control ensures stable and efficient performance.
With a low operating temperature, this product is suitable for various environments.
Dual terminal position offers versatility in installation options.
The low seated height makes it suitable for applications with space constraints.
The compact width allows for easy integration into tight spaces.
Being a switching regulator ensures high energy efficiency.
The short length makes it suitable for applications where space is limited.
Automotive-grade temperature tolerance ensures reliability in automotive applications.
High switching frequency allows for precise voltage regulation.
The high output current capability makes it suitable for demanding applications.
The no-lead terminal form simplifies the installation process.
Pulse width modulation control technique ensures precise voltage regulation.
Being a buck switcher config provides efficient power conversion.
The small terminal pitch allows for fine connections in compact designs.
With a low minimum input voltage, this product is versatile in various power sources.
The high maximum input voltage makes it suitable for a wide range of applications.
Switching Regulators & Controllers ST1S41PUR attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
ST1S41PUR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - IPG-IPC/14/8692 03/Oct/2014
PCN Packaging - Moisture Barrier Bag 09/May/2016
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Philips Components
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
TPS63020DSJT
Texas Instruments
TPS63020DSJT by Texas Instruments is a switching regulator with 14 terminals, operating temperature range of -40 to 85°C, and output current up to 4.5A. Ideal for industrial applications requiring a compact design, it supports input voltages from 1.8V to 5.5V and offers pulse width modulation control for efficient power management at frequencies up to 2600kHz.
LM3578AMX/NOPB
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2672MX-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2841YMK-ADJL/NOPB
LM2841YMK-ADJL/NOPB by Texas Instruments is a switching regulator with max output voltage of 34V, current-mode control, and max output current of 0.3A. Ideal for automotive applications due to its small outline, thin profile package style and wide operating temperature range from -40°C to 125°C.
L5973D013TR
STMicroelectronics
L5973D013TR by STMicroelectronics is a voltage-mode switching regulator with a max output current of 3.5A and a max switching frequency of 280kHz. This MOS technology IC operates in automotive temperature grade applications, with a wide input voltage range from 4V to 36V. It comes in a small outline package suitable for surface mount assembly.
LM2676S-ADJ/NOPB
LM2676S-ADJ/NOPB by Texas Instruments is a switching regulator with max output voltage of 37V, max output current of 5.4A, and control mode in voltage-mode. It is used in automotive applications due to its temp grade and operates b/w -40°C to 125°C range.
LM22675MRE-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5118MHX/NOPB
LM5118MHX/NOPB by Texas Instruments is a current-mode switching controller with a max output voltage of 70V and max output current of 10A. Operating b/w -40 to 125°C, it's ideal for automotive applications due to its buck-boost switcher configuration and pulse width modulation control technique. This small outline IC has a package style with heat sink, making it suitable for compact designs requiring high efficiency.
LMZ35003RKGR
LMZ35003RKGR by Texas Instruments is a switching regulator with 2.5A output current, 1000kHz max switching frequency, and -40 to 85°C operating temp range. Ideal for industrial applications requiring a buck-boost switcher config in a compact chip carrier package style.
TPS54160ADRCT
TPS54160ADRCT by Texas Instruments is a switching regulator with a max output current of 1.5A, operating temperature range of -40 to 125°C, and PWM control mode. Ideal for automotive applications due to its compact size, high efficiency, and wide input voltage range from 3.5V to 60V.
LM2596S-12/NOPB
LM2596S-12/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating b/w -40 to 125°C. It has a voltage output range of 3.3V to 37V and can handle up to 3A output current. Ideal for automotive applications due to its compact size and buck switcher configuration.
LMR16006YQDDCRQ1
LMR16006YQDDCRQ1 by Texas Instruments is a small outline switching regulator with 6 terminals. It operates b/w -40 to 125 °C and supports input voltage from 4-40 V, output voltage from 0.8-36 V, and current up to 0.6 A. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
LMZ14203TZX-ADJ/NOPB
LMZ14203TZX-ADJ/NOPB by Texas Instruments is a switching regulator with 3A output current, 6V max output voltage, and 1000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact design.
LM5116MHX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC34063ACN
MC34063ACN by STMicroelectronics is a voltage-mode switching regulator with 8 terminals. It operates b/w 0-70°C, supporting boost configuration with max output current of 1.5A at 100kHz frequency. Ideal for applications requiring efficient power conversion in commercial-grade electronics.
LMR51420YFDDCR
LMR51420YFDDCR by Texas Instruments is a current-mode switching regulator with max output voltage of 34.2V and max output current of 2A. Ideal for applications requiring pulse width modulation control technique, such as small outline, thin profile designs in automotive electronics.
Analog Integrations
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM2594MX-3.3/NOPB
LM2594MX-3.3/NOPB by Texas Instruments is a voltage-mode switching regulator with a 3.3V output, suitable for automotive applications. It operates b/w -40 to 125°C, handles up to 0.5A output current, and supports input voltages from 4.5V to 40V. This small outline IC uses pulse width modulation control technique at a max frequency of 173kHz for efficient buck conversion.
TPS54340DDAR
TPS54340DDAR by Texas Instruments is a switching regulator with 3.5A output current, 41V max output voltage, and 2500kHz max switching frequency. Ideal for automotive applications due to its low profile design and wide temperature range (-40 to 125°C).
TPS54060DGQR
TPS54060DGQR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with pulse width modulation technique and has a compact square package style with small outline and thin profile, making it ideal for space-constrained designs. With a wide temperature range from -40 to 150°C, this regulator offers reliable performance in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ST1S06PUR
ST1S06PUR by STMicroelectronics is a 6-terminal switching regulator with a max output current of 1.5A and a control mode of current-mode PWM. It operates as a buck switcher with a max switching frequency of 1800kHz, suitable for applications requiring efficient voltage regulation in compact spaces.
ST1S10PHR
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: SOP8,.25;
ST1S14PHR
ST1S14PHR by STMicroelectronics is a switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 5.2 A and supports pulse width modulation control technique. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and high switching frequency of up to 1000 kHz.
ST1S10PUR
ST1S10PUR by STMicroelectronics is a current-mode switching regulator with 3A output current and 1100kHz max frequency. Ideal for applications requiring small outline, heat sink, and thin profile packages. Operates in buck configuration with input voltage range of 2.5V to 18V, making it suitable for various power management systems.
ST1S09IPUR
ST1S09IPUR by STMicroelectronics is a current-mode switching regulator with 3.5A output, 1800kHz max frequency, and BUCK configuration. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline package style and low profile design.
ST1S06PU33R
ST1S06PU33R by STMicroelectronics is a current-mode switching regulator with 6 terminals, offering a max output current of 1.5A and a nominal output voltage of 3.3V. With a compact square package style and very thin profile, it is ideal for applications requiring efficient power management in limited space, such as portable electronic devices. Operating at a max switching frequency of 1800 kHz, this buck switcher supports input voltages ranging from 4.2V to 6V, making it suitable for various battery-powered systems.
ST1S12G18R
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ST1S03PUR
ST1S03PUR by STMicroelectronics is a 6-terminal switching regulator with a max output current of 1.5A and a control mode of current-mode PWM. It operates in buck configuration, supports input voltages from 3V to 16V, and has a compact square package suitable for various applications requiring efficient power management.
ST1S41PHR
ST1S41PHR by STMicroelectronics is a switching regulator with max output current of 7A, operating temp range -40 to 125°C, and max switching frequency of 1000 kHz. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and efficient pulse width modulation control technique.
ST1S09PUR
ST1S09PUR by STMicroelectronics is a switching regulator with 3.5A output current, 1800kHz max frequency, and BUCK switcher config. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline package style and low profile design.
ST1S12G12R
ST1S40IDR
ST1S40IDR by STMicroelectronics is a switching regulator with max output current of 6A and max switching frequency of 1000kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, with input voltage range from 4V to 18V.
ST1S12GR
ST1S06APUR
SWITCHING REGULATOR; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES; Minimum Input Voltage: 4.2 V;
ST1S40IPUR
ST1S40IPUR by STMicroelectronics is a switching regulator with max output current of 6A and max switching frequency of 1000kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring pulse width modulation control technique in a small outline package.
ST1S32PUR
ST1S32PUR by STMicroelectronics is a current-mode switching regulator with 4A output current, 1900 kHz switching frequency, and 5.5V max input voltage. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package design.
ST1S06PU12R
ST1S06PU12R by STMicroelectronics is a 6-terminal switching regulator with a max output current of 1.5A and a max switching frequency of 1800 kHz. It operates in buck configuration, suitable for applications requiring a nominal input voltage of 5V and nominal output voltage of 3.3V.
ST1S40IPHR
ST1S03PM
SWITCHING REGULATOR; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES; Nominal Input Voltage: 5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved