Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Switching regulators and controllers are electronic devices used to regulate the output voltage and current of power supplies. They operate by rapidly switching a power supply circuit between on and off states, resulting in a high-frequency waveform that can be filtered and smoothed to produce a stable output voltage.Switching regulators and controllers offer several advantages over traditional linear regulators, including higher efficiency and the ability to handle a wider range of input voltages. They are commonly used in applications such as power supplies for computers, LED lighting, and motor control.Switching regulators and controllers come in a variety of forms, including step-up (boost), step-down (buck), and step-up/down (buck-boost) configurations. They may be designed as integrated circuits (ICs) or as standalone modules.Switching regulators and controllers typically include feedback control circuits to adjust the output voltage and current, as well as protection circuits to prevent overvoltage, overcurrent, and overtemperature conditions. They may also include features such as soft-start to reduce inrush currents and synchronization with external clock signals.
Add filters
All
Selected
PI3305-00-LGIZ
Vicor
Vicor's PI3305-00-LGIZ is a switching regulator with 8A output current, 1500 kHz switching frequency, and 15V nominal output voltage. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact rectangular grid array package style.
ALSO OPERATES IN ADJUSTABLE MODE FROM 10V TO 16V
SWITCHING REGULATOR
36 V
20.4 V
24 V
R-XBGA-B123
14 mm
1
123
125 Cel
-40 Cel
8 A
16 V
10 V
15 V
UNSPECIFIED
LGA
LGA123,10X14,40
RECTANGULAR
GRID ARRAY
NOT SPECIFIED
2.62 mm
YES
BUCK
1500 kHz
AUTOMOTIVE
BUTT
1 mm
BOTTOM
10 mm
PRM48AH480T200A00
Vicor's PRM48AH480T200A00 is a 200W switching regulator with adjustable output from 20V to 55V, ideal for applications requiring a nominal input voltage of 48V. This rectangular microelectronic assembly features nickel palladium gold terminal finish and operates within a wide input range of 36-75V, making it suitable for various power supply designs.
75 V
48 V
R-XXMA-X
e4
4
55 V
20 V
MICROELECTRONIC ASSEMBLY
245
NO
HYBRID
NICKEL PALLADIUM GOLD
200 W
PRM48BF480T500A00
Vicor's PRM48BF480T500A00 is a 500W switching regulator with 97.8% efficiency, operating at -40 to 125°C. Ideal for automotive applications, it offers a wide input voltage range of 38-55V and output voltage of 20-55V, making it suitable for various power supply needs.
CE, TUV
97.8 %
6.73 mm
38 V
R-XQMA-J32
32.5 mm
.2 %
32
10.42 A
QMA
6.98 mm
Power Supply Modules
BUCK-BOOST
1070 kHz
J BEND
QUAD
500 W
.017 Seconds
22 mm
PRM48BH480T250A00
Vicor PRM48BH480T250A00 is a 250W switching regulator with 96.7% efficiency, VOLTAGE-MODE control mode, and 5.21A output current. Ideal for automotive applications due to its AUTOMOTIVE temperature grade and OVER CURRENT protection feature.
TUV, CE
VOLTAGE-MODE
96.7 %
R-XQMA-J20
20
5.21 A
OVER CURRENT
250 W
16.5 mm
NCP1254ASN65T1G
Onsemi
NCP1254ASN65T1G by Onsemi is a current-mode switching controller with a max switching frequency of 71 kHz. Its small outline, thin profile package makes it suitable for surface mount applications. With dual terminals and gull wing form, it is ideal for compact electronic devices requiring efficient power regulation.
SWITCHING CONTROLLER
CURRENT-MODE
R-PDSO-G6
e3
6
PLASTIC/EPOXY
TSOP
TSOP6,.11,37
SMALL OUTLINE, THIN PROFILE
260
Not Qualified
Switching Regulator or Controllers
71 kHz
TIN
GULL WING
.95 mm
DUAL
30
TPS62366AYZHT
Texas Instruments
TPS62366AYZHT by Texas Instruments is a switching regulator with 16 terminals, operating temperature range of -40 to 85°C, and max output current of 4A. It is ideal for industrial applications requiring precise voltage control in a compact form factor. With a wide input voltage range of 2.5V to 5.5V and high switching frequency of 2500kHz, it offers efficient power management solutions.
ALSO OPERATES IN PFM MODE; OUTPUT VOLTAGE IS ADJUSTABLE FROM 0.5V TO 1.77V
CURRENT/VOLTAGE-MODE
PULSE WIDTH MODULATION
5.5 V
2.5 V
3.6 V
S-PBGA-B16
e1
2.076 mm
16
85 Cel
4 A
1.77 V
.5 V
VFBGA
BGA16,4X4,20
SQUARE
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
.625 mm
2500 kHz
INDUSTRIAL
TIN SILVER COPPER
BALL
.5 mm
TPS62366BYZHR
TPS62366BYZHR by Texas Instruments is a 16-terminal switching regulator with a max output current of 4A and a max switching frequency of 2500 kHz. It operates in industrial temperature grades, suitable for applications requiring precise voltage control in tight spaces. The device supports pulse width modulation control technique and buck switcher configuration for efficient power management.
TPS62366BYZHT
TPS62366BYZHT by Texas Instruments is a switching regulator with 16 terminals and a max output current of 4A. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications. It features pulse width modulation control technique and a buck switcher configuration, with a max switching frequency of 2500 kHz.
L6759DTR
STMicroelectronics
L6759DTR by STMicroelectronics is a dual switching controller with a buck switcher config. It operates at a max frequency of 200 kHz and has a nominal input voltage of 5V. Ideal for applications requiring efficient power management in compact spaces.
DUAL SWITCHING CONTROLLER
5.25 V
4.75 V
5 V
S-XQCC-N48
6 mm
48
70 Cel
0 Cel
HVQCCN
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
200 kHz
COMMERCIAL
NO LEAD
.4 mm
L6759D
STMicroelectronics L6759D is a dual switching controller with buck switcher config. It operates at 200 kHz max frequency, suitable for commercial applications. With a package style of chip carrier and very thin profile, it has 48 terminals in a square shape.
LM25576Q0MHX/NOPB
LM25576Q0MHX/NOPB by Texas Instruments is a switching regulator with 5.1A output current, 545kHz max switching frequency, and -40 to 125°C operating temp range. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range of 6-42V.
ALSO HAS ADJUSTABLE OUTPUT VOLTAGE AS LOW AS 1.225V, SEATED HGT-NOM
42 V
6 V
R-PDSO-G20
6.5 mm
5.1 A
HTSSOP
TSSOP20,.25
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
1.1 mm
545 kHz
MATTE TIN
.65 mm
4.4 mm
LM3102QMH/NOPB
LM3102QMH/NOPB by Texas Instruments is a switching regulator with 20 terminals, VOLTAGE-MODE control mode, and 3.3V nominal output voltage. It operates b/w -40 to 125 °C and supports a max output current of 2.5A. Ideal for automotive applications due to its compact size and high efficiency at up to 1000 kHz switching frequency.
SEATED HGT-NOM, ADJUSTABLE OUTPUT VOLTAGE IS DOWN TO 0.8V
4.5 V
18 V
2.5 A
7 V
.8 V
3.3 V
1000 kHz
MOS
LNBH29EQTR
STMicroelectronics LNBH29EQTR is a 16-terminal switching regulator with a nominal voltage of 12V. It comes in a square chip carrier package and is surface mountable. Ideal for applications requiring power supplies up to 12V, such as in automotive or industrial electronics.
S-PQCC-N16
QCCN
LCC16,.16SQ,25
CHIP CARRIER
12
Power Management Circuits
12 V
.635 mm
NCP6354BMTAATBG
NCP6354BMTAATBG by Onsemi is a switching regulator with 3.3A output current, 3300kHz max switching frequency, and 1.8V nominal output voltage. Ideal for industrial applications requiring efficient power management in a compact form factor.
OUTPUT VOLTAGE RANGE FROM 0.6 V TO 5.5 V, ALSO OPERATES IN PFM CONTROL TECHNIQUE
2.3 V
S-PDSO-N8
2 mm
8
3.3 A
1.8 V
HVSON
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
.8 mm
3300 kHz
NCV7471DQ5R2G
NCV7471DQ5R2G by Onsemi is a switching regulator with 36 terminals, operating voltage of 6-28V, and max output current of 0.5A. Ideal for automotive applications, it features a buck-boost switcher config and temp range from -40 to 150 °C.
28 V
R-PDSO-G36
10.3 mm
2
36
150 Cel
.5 A
HSSOP
SSOP36,.4,20
SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
6/28
2.65 mm
Automotive Circuits
520 kHz
7.5 mm
TPS542941PWP
TPS542941PWP by Texas Instruments is a dual switching controller with a max output current of 2A and a max input voltage of 18V. It operates in voltage-mode control technique with a switching frequency of 700kHz, making it ideal for industrial applications requiring efficient power regulation in compact spaces. The package style is small outline, heat sink/slug, thin profile, shrink pitch.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76 TO 7V
R-PDSO-G16
5 mm
2 A
.76 V
TSSOP16,.25
1.2 mm
2 mA
700 kHz
Nickel/Palladium/Gold (Ni/Pd/Au)
TPS542951PWP
TPS542951PWP by Texas Instruments is a dual switching controller with a buck switcher configuration. It operates at a max frequency of 700 kHz and has a nominal output voltage of 5.5 V, making it ideal for industrial applications requiring precise voltage regulation in compact spaces.
OUTPUT VOLTAGE RANGE FROM 0.76V TO 7V
TPS54328DRCT
TPS54328DRCT by Texas Instruments is a 3A switching regulator with VOLTAGE-MODE control, operating b/w -40 to 85°C. It has a wide input voltage range of 4.5-18V and output voltage from 0.76-7V, making it ideal for industrial applications requiring efficient power conversion at up to 700kHz frequency.
ADJUSTABLE OUTPUT MODE FROM 0.76 TO 7 V
S-PDSO-N10
3 mm
10
3 A
SOLCC10,.12,20
TPS65281RGVT
TPS65281RGVT by Texas Instruments is a switching regulator with 16 terminals, operating temperature range of -40 to 125°C, and output current up to 3A. Ideal for automotive applications, it features a control mode of current-mode PWM and a max switching frequency of 1400 kHz. With a compact square chip carrier package style, it offers efficient power management in tight spaces.
4 mm
17 V
1400 kHz
TPS826745SIPT
TPS826745SIPT by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.6A and a max switching frequency of 6MHz. It operates in industrial temperature grade range (-40 to 85°C) and is suitable for applications requiring precise voltage regulation in compact electronic devices.
ALSO OPERATES IN PFM CONTROL TECHNIQUE
4.8 V
R-PBGA-B8
2.9 mm
.6 A
1.225 V
VBGA
GRID ARRAY, VERY THIN PROFILE
6000 kHz
2.3 mm
NCP4355ADR2G
NCP4355ADR2G by Onsemi is a voltage-mode switching controller with a max switching frequency of 1000 kHz. It operates with an input voltage range from 3.5V to 36V, making it suitable for various power supply applications. This small outline package (4.9mm x 3.9mm) with Gull Wing terminals is ideal for compact designs requiring high-frequency PWM control.
3.5 V
R-PDSO-G8
4.9 mm
SOP
SOP8,.25
SMALL OUTLINE
1.75 mm
SINGLE
1.27 mm
3.9 mm
ADP2118ACPZ-R2
Analog Devices
ADP2118ACPZ-R2 by Analog Devices is a 16-terminal switching regulator with a max output current of 6.4A and a max switching frequency of 1200kHz. Ideal for automotive applications, it operates b/w -40°C to 125°C, with a control mode of current-mode PWM for efficient power management in compact spaces.
S-XQCC-N16
6.4 A
1200 kHz
DMOS
ADP5024ACPZ-R2
ADP5024ACPZ-R2 by Analog Devices is a 24-terminal switching regulator with a max output current of 1.2A and a max switching frequency of 3500 kHz. It utilizes DMOS technology, has a chip carrier package style, and is ideal for applications requiring high-frequency current-mode control in compact designs.
S-PQCC-N24
24
1.2 A
LCC24,.16SQ,20
3500 kHz
ADP5034ACPZ-R2
ADP5034ACPZ-R2 by Analog Devices is a 24-terminal switching regulator with power supplies of 1.8/5V and 2.5/5V, suitable for various applications. Its DMOS technology and square chip carrier package make it ideal for surface mount designs requiring efficient power management in plastic/epoxy material.
1.8/5,2.5/5
AP65200S-13
Diodes Incorporated
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
OUTPUT VOLTAGE RANGE FROM 0.925 V TO 16 V
4.7 V
340 kHz
AP6502ASP-13
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
23 V
.925 V
HLSOP
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
1.5 mm
260 kHz
AP6503ASP-13
OUTPUT VOLTAGE RANGE FROM 0.925 V TO 20 V
240 kHz
LM20144QMHE/NOPB
LM20144QMHE/NOPB by Texas Instruments is a switching regulator with 16 terminals, operating b/w -40 to 125°C. It offers a max output current of 4A and a max switching frequency of 1500 kHz. Ideal for automotive applications due to its compact size, PWM control mode, and buck switcher configuration.
ALSO OPERATES IN ADJUSTABLE MODE DOWN TO 0.8V; SEATED HGT-NOM
2.95 V
LM20144QMHX/NOPB
LM20144QMHX/NOPB by Texas Instruments is a 16-terminal switching regulator with a max output current of 4A and max operating temp of 125°C. Ideal for automotive applications, it operates in buck configuration with pulse width modulation control mode, offering a wide input voltage range from 2.95V to 5.5V.
LMR61428XMMX/NOPB
LMR61428XMMX/NOPB by Texas Instruments is a voltage-mode switching regulator with 2.85A output current, operating b/w -40 to 85°C. It has a boost configuration, supports input voltages from 1.2V to 14V, and outputs at 3.3V. Ideal for industrial applications requiring high efficiency and compact design in a small outline package.
ALSO OPERATES IN ADJUSTABLE MODE UP TO 14V
14 V
1.2 V
S-PDSO-G8
2.85 A
1.24 V
TSSOP
TSSOP8,.19
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
BOOST
2000 kHz
BICMOS
TPS40021MPWPEP
TPS40021MPWPEP by Texas Instruments is a switching regulator with 16 terminals, operating temperature range of -55 to 125°C, and max output current of 25A. Ideal for military applications due to its MIL grade and pulse width modulation control technique. Compact design with small outline package shape makes it suitable for space-constrained environments.
2.25 V
-55 Cel
25 A
4 V
.7 V
4.9 V
PUSH-PULL
MILITARY
TPS40021MPWPREP
TPS40021MPWPREP by Texas Instruments is a switching controller with a max output current of 25A and max operating temp of 125°C. Ideal for military applications, it operates in voltage-mode control with a min input voltage of 2.25V and nominal output voltage of 4.9V.
TPS54360DDA
TPS54360DDA by Texas Instruments is a switching regulator with max output current of 3.5A and max input voltage of 60V, ideal for automotive applications. It operates in current-mode control with a PWM technique at a max switching frequency of 2500kHz, ensuring efficient power conversion. With a compact package style and low profile design, it offers high performance in a small form factor.
60 V
3.5 A
58.8 V
1.7 mm
NICKEL PALLADIUM GOLD SILVER
TPS54362HPWP
TPS54362HPWP by Texas Instruments is a switching regulator with 1A output current, 18V max output voltage, and 2200kHz max switching frequency. Ideal for military applications due to its MILITARY temperature grade and VOLTAGE-MODE control mode. It operates b/w -55°C to 175°C, making it suitable for harsh environments.
ADJUSTABLE OUTPUT MODE FROM 0.9 TO 18 V
PULSE FREQUENCY MODULATION
175 Cel
1 A
.9 V
2200 kHz
TPS56921PWPR
TPS56921PWPR by Texas Instruments is a 20-terminal switching regulator with a max output current of 22A and a control mode of current-mode PWM. With a wide operating temperature range from -40 to 125°C, it is ideal for automotive applications requiring high efficiency and precise voltage regulation.
22 A
1.48 V
.72 V
1600 kHz
UCC28710D
UCC28710D by Texas Instruments is a switching controller with 7 terminals, operating from -40 to 125 °C. It supports buck-boost configuration, with a max input voltage of 35 V and freq modulation control technique. Ideal for automotive applications due to its small outline package and high temp grade.
ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE
FREQUENCY MODULATION
35 V
9 V
25 V
R-PDSO-G7
7
SOP7/8,.25
100 kHz
UCC28713D
UCC28713D by Texas Instruments is a switching controller with a nominal input voltage of 25V, operating b/w -40 to 125°C. It features a buck-boost switcher configuration, frequency modulation control technique, and can handle input voltages ranging from 9V to 35V. This IC is suitable for automotive applications due to its small outline package style and high max operating temperature of 125°C.
UCD74111RVFR
UCD74111RVFR by Texas Instruments is a voltage-mode switching regulator with 15A output current, suitable for automotive applications. It operates at a max frequency of 2MHz, with a supply voltage range of 4.7V to 14V and temperature range from -40°C to 125°C. This chip carrier package has 40 terminals in a rectangular shape, making it ideal for compact designs.
R-PQCC-N40
7 mm
40
15 A
HQCCN
LCC40,.2X.28,20
CHIP CARRIER, HEAT SINK/SLUG
1.52 mm
10 mA
UCD74111RVFT
UCD74111RVFT by Texas Instruments is a 40-terminal switching regulator with VOLTAGE-MODE control mode, operating at -40 to 125 °C. It has a max output current of 15 A and operates in BUCK configuration at a frequency of up to 2000 kHz. Ideal for automotive applications due to its compact size and efficient performance.
TNY289KG
Power Integrations
TNY289KG by Power Integrations is a switching regulator with 11 terminals, operating temperature range of -40 to 125°C, and max output current of 0.695A. It is used in applications requiring a small outline package style, buck-boost switcher configuration, and nominal input voltage of 230V.
265 V
85 V
230 V
R-PDSO-G11
10.16 mm
3
11
.695 A
HSOP
SOP11/12,.46,70
SMALL OUTLINE, HEAT SINK/SLUG
2.49 mm
140 kHz
1.78 mm
8.89 mm
ADP2370ACPZ-R2
ADP2370ACPZ-R2 by Analog Devices is a current-mode switching regulator with max output current of 0.8A and max switching frequency of 1400kHz. It operates in industrial temperature range (-40 to 85°C) and has a small outline package suitable for surface mount applications.
R-PDSO-N8
.8 A
SON
SOLCC8,.12,20
BU21078MUV-E2
ROHM
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
3 V
S-XQCC-N28
28
-20 Cel
OTHER
PAM2301CAAB180
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
R-PDSO-G5
5
TSOP5/6,.11,37
1.6 mm
PAM2301CAAB250
PAM2301CAAB280
2.8 V
PAM2301CAAB330
1800 kHz
PAM2301CAABADJ
MCP19035T-AAABE/MF
Microchip Technology
MCP19035T-AAABE/MF by Microchip is a VOLTAGE-MODE SWITCHING CONTROLLER with BUCK switcher config. It operates at -40 to 125 °C, supports 4.5-30V input, and delivers up to 20A output current. Ideal for automotive applications due to its TS16949 screening level and small form factor.
30 V
R-PDSO-N10
20 A
TS 16949
345 kHz
© 2023 All rights reserved
