Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
TL594IPWG4
Texas Instruments
TL594IPWG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 0.25A and a max switching frequency of 300kHz. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for various push-pull switcher applications. The IC features a small outline package style with dual terminal position and gull wing form factor.
SWITCHING CONTROLLER
VOLTAGE-MODE
PULSE WIDTH MODULATION
40 V
7 V
15 V
R-PDSO-G16
5 mm
1
16
85 Cel
-40 Cel
.25 A
PLASTIC/EPOXY
TSSOP
TSSOP16,.25
RECTANGULAR
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
NOT SPECIFIED
Not Qualified
1.2 mm
Switching Regulator or Controllers
YES
PUSH-PULL
300 kHz
BIPOLAR
INDUSTRIAL
GULL WING
.65 mm
DUAL
4.4 mm
TL594IPWRG4
TL594IPWRG4 by Texas Instruments is a voltage-mode switching controller with 16 terminals, operating at -40 to 85 °C. It has a boost switcher config, PWM control technique, and max output current of 0.25 A. Ideal for industrial applications requiring precise voltage regulation up to 5.05 V at 300 kHz frequency.
e4
5.05 V
4.95 V
5 V
260
18 mA
BOOST
NICKEL PALLADIUM GOLD
30
UC2842D8G4
UC2842D8G4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates in industrial temperature range (-40 to 85°C) and supports pulse width modulation control technique at a max switching frequency of 500 kHz. Ideal for buck-boost configurations, it has a nominal input voltage of 15V and can handle up to 1A output current.
CURRENT-MODE
28 V
11 V
R-PDSO-G8
4.9 mm
8
1 A
SOP
SOP8,.25
SMALL OUTLINE
1.75 mm
25 mA
16 V
BUCK-BOOST
500 kHz
BICMOS
1.27 mm
3.9 mm
UC2843D8G4
UC2843D8G4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates at temperatures from -40 to 85 °C, with a max output current of 1A and switching frequency of 500kHz. Ideal for industrial applications requiring pulse width modulation control in buck-boost configurations.
8.2 V
8.4 V
UC2843NG4
UC2843NG4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates in industrial temperature range (-40 to 85 °C) and supports pulse width modulation control technique. Ideal for buck-boost applications, it has a max output current of 1A and can handle supply voltages from 8.2V to 28V.
R-PDIP-T8
9.59 mm
DIP
DIP8,.3
IN-LINE
5.08 mm
NO
Nickel/Palladium/Gold (Ni/Pd/Au)
THROUGH-HOLE
2.54 mm
7.62 mm
UC2844DG4
UC2844DG4 by Texas Instruments is a switching controller with BICMOS technology. It operates at -40 to 85°C, supports PWM control mode, and has a max output current of 1A. Ideal for industrial applications requiring buck-boost switcher config and a max switching frequency of 500kHz.
R-PDSO-G14
8.65 mm
14
SOP14,.25
UC2845D8G4
UC2845D8G4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates in industrial temperature range (-40 to 85°C) and supports pulse width modulation control technique. With a max output current of 1A, it is ideal for buck-boost applications at up to 500kHz switching frequency.
UC2845DG4
UC2845DG4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates in industrial temperature range (-40 to 85°C) and supports pulse width modulation control technique up to 500 kHz. Ideal for buck-boost configurations, it has a max output current of 1A and nominal input voltage of 15V, making it suitable for various power supply applications.
UC2845DTRG4
UC2845DTRG4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates in industrial temperature range (-40 to 85°C) and supports a max output current of 1A at a nominal input voltage of 15V. Ideal for applications requiring pulse width modulation control technique and single switcher configuration up to 500kHz frequency.
25 V
SINGLE
UCC2818DG4
UCC2818DG4 by Texas Instruments is a current-mode power factor controller with a max output current of 1.2A and a max switching frequency of 120kHz. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for boost switcher applications requiring precise pulse width modulation control.
POWER FACTOR CONTROLLER
10.3 V
12 V
9.9 mm
1.2 A
SOP16,.25
120 kHz
UCC28501DWG4
UCC28501DWG4 by Texas Instruments is a current-mode switching regulator with a max output current of 1.2A and a max switching frequency of 120kHz. It operates in industrial temperature grade range from -40 to 85°C, making it suitable for power factor correction applications. The IC features boost switcher configuration and utilizes pulse width modulation control technique for efficient power management.
CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE
POWER FACTOR CONTROLLER WITH POST REGULATOR
R-PDSO-G20
12.8 mm
2
20
SOP20,.4
2.65 mm
4 mA
18 V
7.5 mm
UCC28512DWG4
UCC28512DWG4 by Texas Instruments is a current-mode switching regulator with a max output current of 3.5A and a max switching frequency of 500kHz. It operates in an industrial temperature grade range from -40 to 105°C, making it suitable for power factor control applications requiring high efficiency and precision regulation.
10.8 V
12.825 mm
105 Cel
3.5 A
7.49 mm
UCD8220PWPRG4
UCD8220PWPRG4 by Texas Instruments is a VOLTAGE-MODE SWITCHING CONTROLLER with 16 terminals, operating b/w -40 to 105°C. It supports a max output current of 4A at a switching frequency of 2MHz. Ideal for industrial applications requiring high efficiency and precise voltage regulation in compact spaces.
CAN ALSO BE CONFIGURED IN CURRENT MODE
15.5 V
4.5 V
4 A
HTSSOP
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
2000 kHz
TPS23750PWPRG4
TPS23750PWPRG4 by Texas Instruments is a switching controller with a 48V nominal input voltage and 1.3A max output current. It operates in industrial temperature grade range (-40 to 85°C) using pulse width modulation control technique at a max switching frequency of 565kHz. This compact device, with small outline package style, is ideal for various power management applications requiring efficient current-mode control.
67 V
0 V
48 V
6.5 mm
1.3 A
TSSOP20,.25
.85 mA
565 kHz
TPS23750PWP
TPS23750PWP by Texas Instruments is a switching controller with a 48V nominal input voltage and 1.3A max output current. It operates in an industrial temperature range of -40 to 85°C, featuring a control mode of current-mode PWM with a max switching frequency of 565kHz. This device is suitable for applications requiring efficient power management in compact spaces.
TPS40130RHBT
TPS40130RHBT by Texas Instruments is a current-mode switching controller with a 5V nominal input voltage and PWM control technique. It operates in an industrial temperature range from -40 to 85°C, featuring a max switching frequency of 1200 kHz. Ideal for applications requiring efficient power management in compact spaces.
5.5 V
S-PQCC-N32
32
HVQCCN
LCC32,.2SQ,20
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
1 mm
PHASE-SHIFT
1200 kHz
NO LEAD
.5 mm
QUAD
TPS60212DGSRG4
TPS60212DGSRG4 by Texas Instruments is a small outline, thin profile switched capacitor regulator with a boost switcher configuration. It operates in industrial temperature grade range from -40 to 85°C and has a max output current of 0.05A at a max switching frequency of 400kHz. Ideal for applications requiring a min output voltage of 3.3V and input voltage ranging from 1.8V to 3.6V.
SWITCHED CAPACITOR REGULATOR
3.6 V
1.8 V
2.4 V
S-PDSO-G10
3 mm
10
.05 A
3.3 V
TSSOP10,.19,20
1.1 mm
Other Analog ICs
400 kHz
TPS61100PWG4
TPS61100PWG4 by Texas Instruments is a switching regulator with 1.8A output current, 800kHz max switching frequency, and boost switcher config. Ideal for industrial applications requiring pulse width modulation control technique in a small outline package with dual terminals.
SWITCHING REGULATOR
.8 V
1.8 A
800 kHz
UCC2809DTR-1G4
UCC2809DTR-1G4 by Texas Instruments is a current-mode switching controller with a max output current of 0.8A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring precise control and efficiency. The package style is small outline with gull wing terminals, ideal for space-constrained designs.
10 V
.8 A
19 V
1000 kHz
BCDMOS
UCC28521DWRG4
UCC28521DWRG4 by Texas Instruments is a current-mode power factor controller with post regulator. It operates in an industrial temperature range from -40 to 85°C, with a max output current of 3.5A and a max switching frequency of 240 kHz. This boost switcher IC is designed for applications requiring efficient power management in compact spaces.
PEAK CURRENT MODE ALSO AVAILABLE
10.6 V
240 kHz
MC33262CDR2G
Onsemi
MC33262CDR2G by Onsemi is a switching regulator with 12V nominal voltage, 0.5A max output current, and PWM control mode. Ideal for boost applications in industrial settings due to its compact size, dual terminals, and wide operating temperature range from -40 °C to 105°C.
9 V
e3
.5 A
12
20 mA
TIN
MC33262CDR2
MC33262CDR2 by Onsemi is a switching regulator with 12V nominal voltage and 0.5A max output current. It operates in current-mode control with pulse width modulation technique, suitable for power factor correction applications. This small outline IC has industrial temperature grade and supports input voltages from 9V to 30V.
30 V
e0
235
TIN LEAD
CS51022ADBG
CS51022ADBG by Onsemi is a switching controller with 16 terminals, operating at -40 to 85 °C. It features a max output current of 1A, PWM control mode, and max switching frequency of 1000 kHz. Ideal for industrial applications requiring precise current regulation in compact spaces.
20 V
14 V
TPS40200DG4
TPS40200DG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 3A and a max output voltage of 46V. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring high efficiency and precision control. The compact rectangular package style with surface mount capability enhances its versatility in space-constrained designs.
52 V
3 A
46 V
.7 V
TPS51117PWRG4
TPS51117PWRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 10A and a max switching frequency of 550kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power regulation in compact spaces. The package style is small outline, thin profile, shrink pitch, with surface mount capability for easy integration into electronic designs.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V
10 A
.76 V
TSSOP14,.25
550 kHz
TPS51124RGERG4
TPS51124RGERG4 by Texas Instruments is a dual switching controller with a max output current of 15A and a max input voltage of 28V. It operates in voltage-mode control technique with a switching frequency of up to 420kHz, suitable for industrial applications requiring precise power regulation in compact spaces. The chip carrier package style with very thin profile makes it ideal for surface mount designs where space is limited.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V; IT ALSO REQUIRED 3 TO 28V INPUT SUPPLY
DUAL SWITCHING CONTROLLER
3 V
S-PQCC-N24
4 mm
24
15 A
LCC24,.16SQ,20
420 kHz
TPS51124RGET
TPS51124RGET by Texas Instruments is a dual switching controller with a max output current of 15A and a max input voltage of 28V. It operates in voltage-mode control technique, with a min operating temperature of -40°C and a max switching frequency of 420kHz. Ideal for industrial applications requiring efficient power regulation in compact spaces.
UCC2580D-3G4
UCC2580D-3G4 by Texas Instruments is a voltage-mode switching controller with a nominal input voltage of 12V and output voltage of 5V. It operates in industrial temperature range (-40 to 85°C) with a max output current of 1.2A at a max switching frequency of 430kHz. Ideal for applications requiring efficient buck-boost control in compact designs.
5.125 V
4.875 V
3.5 mA
430 kHz
UCC2808ADTR-1G4
UCC2808ADTR-1G4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates at 10V nominal voltage, supports up to 1A output current, and has a max switching frequency of 1000 kHz. Ideal for industrial applications requiring precise pulse width modulation control in compact designs.
13 V
UCC2894DRG4
UCC2894DRG4 by Texas Instruments is a switching controller with a 12V nominal input voltage, 2.5A max output current, and 600kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85°C and features pulse width modulation control in a small outline package.
14.5 V
8.5 V
2.5 A
3 mA
600 kHz
UCC28C41DG4
UCC28C41DG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power management applications. With BICMOS technology and pulse width modulation control technique, this IC is ideal for compact designs requiring efficient power regulation.
ALSO OPERATES IN CURRENT MODE
UCC25705DGKTRG4
UCC25705DGKTRG4 by Texas Instruments is a voltage-mode switching controller with a max switching frequency of 4000 kHz. It operates in an industrial temperature grade range from -40 to 85 °C and has a nominal input voltage of 11 V. This small outline, thin profile IC with gull wing terminals is ideal for applications requiring precise pulse width modulation control at low output currents.
S-PDSO-G8
.02 A
TSSOP8,.19
5 mA
4000 kHz
NICKEL PALLADIUM GOLD SILVER
UCC2802DG4
UCC2802DG4 by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various buck-boost applications requiring precise control and efficient power management. The package style is small outline with gull wing terminals, ideal for space-constrained designs that demand high performance.
12.5 V
UCC2888DG4
UCC2888DG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 0.2A and a max switching frequency of 100kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
6.6 V
.2 A
100 kHz
TPS61026DRCR
TPS61026DRCR by Texas Instruments is a switching regulator with a max output current of 2.1A and max operating temp of 85°C. Ideal for industrial applications, it has a boost switcher config, PWM control mode, and operates at a max frequency of 720kHz.
.9 V
1.2 V
S-PDSO-N10
2.1 A
HVSON
SOLCC10,.12,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
720 kHz
TPS61026DRCTG4
TPS61026DRCTG4 by Texas Instruments is a switching regulator with a max output current of 2.1A and a max operating temperature of 85°C. It operates in boost configuration, has a min input voltage of 0.9V, and is suitable for industrial applications requiring precise voltage regulation in compact spaces.
TPS61029DRCTG4
TPS61029DRCTG4 by Texas Instruments is a switching regulator with a max output current of 2.1A and max output voltage of 5.5V, ideal for industrial applications. It operates b/w -40 to 85°C, featuring boost switcher config and pulse width modulation control mode for efficient power management in compact designs.
ALSO HAS ADJUSTABLE OUTPUT VOLTAGE UP TO 5.5 V
TPS62222DDCTG4
TPS62222DDCTG4 by Texas Instruments is a voltage-mode switching regulator with 1.8V output, 0.4A current, and 1850kHz frequency. Ideal for industrial applications, it operates b/w -40 to 85°C temperatures in a small outline package suitable for surface mounting.
PFM MODE IS ALSO AVAILABLE
6 V
2.5 V
R-PDSO-G5
2.9 mm
5
.4 A
BUCK
1850 kHz
.95 mm
1.6 mm
TPS62227DDCT
TPS62227DDCT by Texas Instruments is a switching regulator with a max output current of 0.4A and a max switching frequency of 1850kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring a compact design with small outline and thin profile package style.
TPS62229DDCRG4
TPS62229DDCRG4 by Texas Instruments is a small outline switching regulator with 5 terminals, operating b/w -40 to 85°C. It has a max output current of 0.4A and supports pulse width modulation control technique at a frequency of up to 1850 kHz. Ideal for industrial applications requiring voltage-mode control in compact spaces.
1.7 V
TSOP5/6,.11,37
TPS68000DBTG4
TPS68000DBTG4 by Texas Instruments is a switching regulator with 30 terminals, operating voltage of 8-30V, and max frequency of 100kHz. Ideal for industrial applications requiring a compact design, it features a push-pull switcher config and operates b/w -40 to 85°C.
FLUORESCENT LIGHT CONTROLLER
8 V
24 V
R-PDSO-G30
7.8 mm
TSSOP30,.25,20
8/30
TPS68000DBTRG4
TPS68000DBTRG4 by Texas Instruments is a small outline, thin profile switching regulator with 30 terminals. It operates in industrial temperature range (-40 to 85°C) and has a max switching frequency of 100 kHz. Ideal for applications requiring a nominal input voltage of 24V and nominal output voltage of 12V.
TPS60131PWPG4
TPS60131PWPG4 by Texas Instruments is a switching regulator with 20 terminals, operating b/w -40 to 85°C. It has a min input voltage of 2.7V and max output current of 0.3A, suitable for industrial applications requiring a stable 5V output voltage. With a compact design and surface-mount capability, it offers efficient power management in various electronic devices.
5.4 V
2.7 V
.3 A
DOUBLER INVERTER
450 kHz
UC28025NG4
The Texas Instruments UC28025NG4 is a switching controller with 16 terminals, operating b/w -40 to 105°C. It supports a max output current of 2A and has a max switching frequency of 1kHz. Ideal for industrial applications requiring pulse width modulation control in buck-boost configurations.
CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE
CURRENT/VOLTAGE-MODE
R-PDIP-T16
19.305 mm
2 A
DIP16,.3
9.2 V
UC2825ANG4
UC2825ANG4 by Texas Instruments is a switching controller with 16 terminals and a package style of IN-LINE. It operates b/w -40 to 85°C, with a max output current of 2.2A at a frequency of up to 1MHz. Ideal for industrial applications requiring precise voltage regulation in compact designs.
22 V
8.8 V
2.2 A
5.15 V
5.1 V
36 mA
UC2825AQG3
UC2825AQG3 by Texas Instruments is a 20-terminal switching controller with voltage-mode control technique. It operates b/w -40 to 85°C, has a max output current of 2.2A, and supports pulse width modulation. Ideal for industrial applications requiring high-frequency push-pull switcher configurations.
S-PQCC-J20
8.965 mm
QCCJ
LDCC20,.4SQ
CHIP CARRIER
4.57 mm
1150 kHz
MATTE TIN
J BEND
UC2825BDWG4
UC2825BDWG4 by Texas Instruments is a switching controller with a 12V nominal input and output voltage of 5.1V, operating in current/voltage-mode control technique. With a max output current of 2.2A and switching frequency up to 1000 kHz, it's ideal for industrial applications requiring precise power regulation in compact spaces.
10.3 mm
SOP16,.4
UCC25701PWG4
UCC25701PWG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1.2A and a max switching frequency of 700kHz. It operates in industrial temperature grade range from -40 to 85°C, making it suitable for various power management applications requiring precise voltage regulation.
700 kHz
© 2023 All rights reserved
