Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
UCC2808D-2G4
Texas Instruments
UCC2808D-2G4 by Texas Instruments is a switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in industrial temperature grade range (-40 to 85°C) and uses pulse width modulation control technique. Ideal for applications requiring efficient power management in compact spaces.
SWITCHING CONTROLLER
CURRENT-MODE
PULSE WIDTH MODULATION
14 V
4.3 V
10 V
R-PDSO-G8
e4
4.9 mm
1
8
85 Cel
-40 Cel
1 A
PLASTIC/EPOXY
SOP
SOP8,.25
RECTANGULAR
SMALL OUTLINE
260
Not Qualified
1.75 mm
Switching Regulator or Controllers
20 mA
5 V
YES
PUSH-PULL
1000 kHz
BICMOS
INDUSTRIAL
NICKEL PALLADIUM GOLD
GULL WING
1.27 mm
DUAL
30
3.9 mm
UCC28521DWR
UCC28521DWR by Texas Instruments is a current-mode power factor controller with post regulator. It operates in an industrial temperature range from -40 to 85°C, with a max output current of 3.5A and a switching frequency of 240kHz. This boost switcher IC is designed for applications requiring efficient power management in a small outline package.
PEAK CURRENT MODE ALSO AVAILABLE
POWER FACTOR CONTROLLER WITH POST REGULATOR
15 V
10.6 V
12 V
R-PDSO-G20
12.8 mm
20
3.5 A
SOP20,.4
NOT SPECIFIED
2.65 mm
BOOST
240 kHz
7.5 mm
UCC28521DW
UCC28521DW by Texas Instruments is a current-mode switching regulator with a max output current of 3.5A and a max switching frequency of 500kHz. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for power factor correction applications requiring high efficiency and precise control.
18 V
4 mA
500 kHz
UCC28528DWR
UCC28528DWR by Texas Instruments is a current-mode power factor controller with post regulator. It operates in an industrial temperature range from -40 to 105°C, with a max output current of 3.5A and a max switching frequency of 240kHz. This boost switcher IC is designed for applications requiring efficient power management in compact spaces.
105 Cel
UCC2809PWTR-1G4
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
4.4 mm
2
.8 A
TSSOP
TSSOP8,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.2 mm
25 mA
19 V
SINGLE
BCDMOS
Nickel/Palladium/Gold (Ni/Pd/Au)
.65 mm
3 mm
UCC2810DWTRG4
UCC2810DWTRG4 by Texas Instruments is a current-mode dual switching controller with a max output current of 1A and a max switching frequency of 1000 kHz. It operates in an industrial temperature grade range from -40°C to 85°C, making it suitable for various buck-boost applications requiring precise pulse width modulation control.
DUAL SWITCHING CONTROLLER
11 V
9.5 V
R-PDSO-G16
10.3 mm
16
SOP16,.4
11.3 V
BUCK-BOOST
UCC2810NG4
UCC2810NG4 by Texas Instruments is a dual switching controller with current-mode control technique. It operates in industrial temperature grade range (-40 to 85°C) and supports a max output current of 1A at a max switching frequency of 1000kHz. Ideal for applications requiring pulse width modulation control in buck-boost configurations.
R-PDIP-T16
19.305 mm
DIP
DIP16,.3
IN-LINE
5.08 mm
NO
THROUGH-HOLE
2.54 mm
7.62 mm
UCC2897PWRG4
UCC2897PWRG4 by Texas Instruments is a switching controller with a max output current of 2.5A and a max switching frequency of 270kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring a nominal input voltage of 12V. The IC features a small outline package style with dual terminal position and Gull Wing terminal form.
CAN ALSO BE CONFIGURED IN CURRENT MODE
VOLTAGE-MODE
14.5 V
8.5 V
6.5 mm
2.5 A
TSSOP20,.25
270 kHz
UCC2800DG4
UCC2800DG4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates at 10V nominal input voltage, supports up to 1A output current, and has a max switching frequency of 1000 kHz. Ideal for industrial applications requiring pulse width modulation control in buck-boost configurations.
7.5 V
7.2 V
TPS40074RHLTG4
TPS40074RHLTG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 2A and a max switching frequency of 1kHz. It operates in industrial temperature grade range (-40 to 85°C) and is suitable for applications requiring efficient power regulation in compact spaces.
28 V
4.5 V
R-PQCC-N20
4.5 mm
2 A
8 V
HVQCCN
LCC20/24,.14X.18,20
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
1 mm
NO LEAD
.5 mm
QUAD
3.5 mm
TPS54610PWPG4
TPS54610PWPG4 by Texas Instruments is a switching regulator with 6A output current, 700kHz max switching frequency, and VOLTAGE-MODE control. Ideal for industrial applications requiring a compact design, it operates b/w -40 to 85°C with input voltage range of 3-6V and output voltage from 0.9-4.5V.
SWITCHING REGULATOR
6 V
3 V
5.5 V
R-PDSO-G28
9.7 mm
28
6 A
.9 V
HTSSOP
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
BUCK
700 kHz
TPS60230RGTTG4
TPS60230RGTTG4 by Texas Instruments is a SWITCHED CAPACITOR REGULATOR with 90% efficiency, 1250 kHz switching frequency, and 0.2 A output current. Ideal for industrial applications requiring a compact CHIP CARRIER package with very thin profile and high temperature tolerance up to 85°C.
SWITCHED CAPACITOR REGULATOR
90 %
6.5 V
2.7 V
3.6 V
S-PQCC-N16
5
.2 A
SQUARE
DOUBLER INVERTER
1250 kHz
TPS60230RGTT
TPS60230RGTT by Texas Instruments is a switching regulator with 90% efficiency, operating temperature range of -40 to 85°C, and output voltage ranging from 2.7V to 6.5V. Ideal for industrial applications requiring a boost switcher configuration with a max output current of 0.2A and pulse width modulation control technique.
UCC2973PWG4
UCC2973PWG4 by Texas Instruments is a current-mode switching regulator with a 12V nominal voltage and max operating temperature of 85°C. It features pulse width modulation control technique, BICMOS technology, and a max switching frequency of 160 kHz. Ideal for industrial applications requiring efficient power supplies in compact spaces.
FLUORESCENT LIGHT CONTROLLER
25 V
12
CURRENT FED PUSH-PULL
160 kHz
LT1054IDWG4
Texas Instruments LT1054IDWG4 is a 16-terminal switching regulator with a max output voltage of -15V and min input voltage of 3.5V. It operates in industrial temperature range (-40 to 85°C) and has a max switching frequency of 100 kHz. Ideal for applications requiring small outline, low current (0.1A), and dual terminal configuration.
3.5 V
7 V
.1 A
-15 V
-1.25 V
-5 V
4.5 mA
100 kHz
BIPOLAR
LT1054IPE4
LT1054IPE4 by Texas Instruments is a SWITCHED CAPACITOR REGULATOR with -15V max output voltage, 100 kHz max switching frequency, and 7V nominal input voltage. It is ideal for industrial applications requiring a compact IN-LINE package with 8 terminals and -40 to 85 °C operating temperature range.
R-PDIP-T8
9.81 mm
MC33063APE4
MC33063APE4 by Texas Instruments is a switching regulator with 8 terminals, VOLTAGE-MODE control mode, and BUCK-BOOST switcher config. It operates b/w -40 to 85 °C with max output current of 1.5 A. Ideal for industrial applications requiring efficient voltage regulation up to 40 V at 100 kHz frequency.
40 V
1.5 A
1.25 V
DIP8,.3
TL494IDRE4
TL494IDRE4 by Texas Instruments is a voltage-mode switching controller with a nominal output voltage of 5V. It operates in an industrial temperature range from -40 to 85°C, featuring a max switching frequency of 300 kHz. Ideal for applications requiring pulse width modulation control in push-pull configurations.
9.9 mm
.25 A
5.25 V
4.75 V
SOP16,.25
15 mA
300 kHz
TL5001IPE4
TL5001IPE4 by Texas Instruments is a VOLTAGE-MODE SWITCHING CONTROLLER with 8 terminals, operating b/w -40 to 85 °C. It has a BUCK-BOOST configuration, supporting input voltage from 3.6V to 40V and output voltage of 1V at max current of 0.1A. Ideal for industrial applications requiring efficient power regulation up to 50V.
50 V
1 V
2.1 mA
400 kHz
TL5002IDG4
TL5002IDG4 by Texas Instruments is a voltage-mode switching controller with max output voltage of 50V and max output current of 0.1A. It operates in industrial temperature range, suitable for applications requiring pulse width modulation control technique at up to 500kHz switching frequency. Package style is small outline, ideal for compact designs.
3.905 mm
TPS40051PWPG4
TPS40051PWPG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 0.2A and a max switching frequency of 1MHz. It operates in an industrial temperature grade range from -40°C to 85°C, making it suitable for various power management applications requiring precise voltage regulation.
24 V
5 mm
33.5 V
31.5 V
32.5 V
TSSOP16,.25
TPS40055PWPG4
TPS40055PWPG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 20A and a max output voltage of 35V. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring high efficiency and precision control.
20 A
35 V
.7 V
32.2 V
TPS40100RGETG4
TPS40100RGETG4 by Texas Instruments is a switching controller with 24 terminals, operating at -40 to 85°C. It features a current-mode control technique, pulse width modulation, and a max output current of 2A. Ideal for industrial applications requiring a compact chip carrier package with very thin profile.
S-PQCC-N24
4 mm
24
LCC24,.16SQ,20
600 kHz
TPS40130DBTG4
TPS40130DBTG4 by Texas Instruments is a current-mode switching controller with a 5V nominal input voltage and 1200 kHz max switching frequency. It operates in industrial temperature grade range (-40 to 85 °C) and uses pulse width modulation control technique. Ideal for applications requiring small outline, thin profile regulators with dual terminals.
R-PDSO-G30
7.8 mm
TSSOP30,.25,20
PHASE-SHIFT
1200 kHz
TPS40130DBTRG4
TPS40130DBTRG4 by Texas Instruments is a current-mode switching controller with a max switching frequency of 1200 kHz. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for various applications requiring precise power management. With a compact design and pulse width modulation control technique, this device is ideal for use in space-constrained environments where efficient power conversion is essential.
TPS40190DRCRG4
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
S-PDSO-N10
10
12.75 V
.6 V
5.3 V
HVSON
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
TPS51020DBTG4
TPS51020DBTG4 by Texas Instruments is a dual switching controller with voltage-mode control technique. It operates b/w -40 to 85 °C, has max output current of 0.05 A, and supports PWM with 450 kHz switching frequency. Ideal for industrial applications requiring compact design and efficient power management.
.05 A
450 kHz
TPS5130PTG4
TPS5130PTG4 by Texas Instruments is a switching controller with 3 functions, operating at -40 to 85°C. It has a max output current of 15A and supports a max input voltage of 28V. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
ALSO CONTAIN LDO REGULATOR CONTROLLER
S-PQFP-G48
7 mm
3
4
48
15 A
LFQFP
FLATPACK, LOW PROFILE, FINE PITCH
1.6 mm
TPS54010PWPG4
TPS54010PWPG4 by Texas Instruments is a switching regulator with 28 terminals, operating b/w -40 to 85°C. It offers a max output current of 14A and a max switching frequency of 700kHz. Ideal for industrial applications requiring voltage-mode control with input voltages ranging from 2.2V to 4V.
ALSO REQUIRES 3V TO 4V SUPPLY
4 V
2.2 V
2.5 V
14 A
TPS54353PWPG4
TPS54353PWPG4 by Texas Instruments is a voltage-mode switching regulator with 6.5A output current, ideal for industrial applications. It operates b/w -40 to 85°C, with a max switching frequency of 600kHz. This compact IC has a small outline package and supports input voltages from 4.5V to 20V.
20 V
6.5 A
1.515 V
1.485 V
1.5 V
TPS54372PWPG4
TPS54372PWPG4 by Texas Instruments is a 20-terminal switching regulator with a max output current of 3A and a control mode of voltage-mode PWM. It operates b/w -40 to 85°C, making it suitable for industrial applications requiring efficient power management in compact spaces.
3 A
762 kHz
TPS54672PWPG4
TPS54672PWPG4 by Texas Instruments is a voltage-mode switching regulator with a max output current of 12A and a max switching frequency of 700kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring high efficiency and compact design. The package style is small outline with gull wing terminals, ideal for space-constrained PCB layouts.
12 A
TPS54680PWPG4
TPS54680PWPG4 by Texas Instruments is a 28-terminal switching regulator with a max output current of 12A and max operating temp of 85°C. Ideal for industrial applications, it operates in voltage-mode control with a buck switcher config and PWM technique, offering an output voltage range from 0.9V to 3.3V.
3.3 V
TSSOP28,.25
TPS54872PWPRG4
TPS54872PWPRG4 by Texas Instruments is a voltage-mode switching regulator with a max output current of 12A and a max switching frequency of 762kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring high efficiency and compact design. The package style is small outline with gull wing terminals, ideal for space-constrained PCB layouts.
TPS60200DGSG4
TPS60200DGSG4 by Texas Instruments is a small outline, thin profile switched capacitor regulator with a max output current of 0.1A and a max switching frequency of 400kHz. It operates in industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring stable 3.3V output voltage.
1.6 V
2.4 V
S-PDSO-G10
TSSOP10,.19,20
1.07 mm
Other Analog ICs
NICKEL PALLADIUM GOLD SILVER
TPS60205DGSG4
TPS60205DGSG4 by Texas Instruments is a small outline, thin profile switched capacitor regulator with 10 terminals. It operates b/w -40 to 85°C, providing a 3.3V output voltage at a max current of 0.1A. Ideal for industrial applications requiring compact and efficient power management solutions.
TPS60205DGSRG4
TPS60205DGSRG4 by Texas Instruments is a small outline, thin profile switched capacitor regulator with a max output current of 0.1A and a max switching frequency of 400kHz. It operates in industrial temperature grade range (-40 to 85°C) and is suitable for applications requiring a min output voltage of 3.3V, such as portable electronic devices.
TPS60300DGSG4
SWITCHED CAPACITOR REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
1.8 V
.04 A
650 kHz
TPS60300DGSRG4
TPS60300DGSRG4 by Texas Instruments is a small outline, thin profile switched capacitor regulator with a max output current of 0.04A and a max switching frequency of 650kHz. It operates in industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces.
TPS60303DGSG4
TPS60303DGSG4 by Texas Instruments is a small outline, thin profile switched capacitor regulator with a max output current of 0.04A and a max switching frequency of 900kHz. Ideal for industrial applications requiring a nominal input voltage of 1V and nominal output voltage of 3V in a compact square package.
900 kHz
TPS60402DBVTG4
TPS60402DBVTG4 by Texas Instruments is a small outline, low profile switched capacitor converter with a max output current of 0.06A and operating temperature range from -40 to 85°C. It features a dual terminal position, gull wing form factor, and is ideal for industrial applications requiring an input voltage b/w 1.8V to 5V.
SWITCHED CAPACITOR CONVERTER
R-PDSO-G5
2.9 mm
.06 A
-1.6 V
-5.25 V
LSSOP
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.45 mm
80 kHz
.95 mm
TPS60500DGSG4
TPS60500DGSG4 by Texas Instruments is a switching regulator with 10 terminals, operating at -40 to 85°C. It has a nominal input voltage of 5V and can handle up to 0.25A output current with a max output voltage of 3.3V. Ideal for industrial applications requiring a compact, high-frequency switched capacitor regulator in a small outline package.
.8 V
TPS60502DGSRG4
TPS60502DGSRG4 by Texas Instruments is a small outline, thin profile switched capacitor regulator with a nominal input voltage of 5V and output voltage of 1.8V. It operates in industrial temperature grade range from -40 to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. With a max output current of 0.3A and switching frequency of up to 1200kHz, this device is ideal for portable electronics and battery-powered devices.
.3 A
TPS60503DGSRG4
TPS60503DGSRG4 by Texas Instruments is a small outline, thin profile switched capacitor regulator with 10 terminals. It operates in industrial temperature range (-40 to 85°C) and has a max output current of 0.3A at a switching frequency of 1200kHz. Ideal for applications requiring a nominal input voltage of 5V and nominal output voltage of 1.5V in compact designs.
TPS61090RSARG4
TPS61090RSARG4 by Texas Instruments is a switching regulator with max output voltage of 5.5V and max output current of 2.5A, ideal for battery charge controllers. It operates b/w -40 to 85°C, uses pulse width modulation control technique, and has a max switching frequency of 700 kHz.
BATTERY CHARGE CONTROLLER
LCC16,.16SQ,25
TPS61100RGERG4
TPS61100RGERG4 by Texas Instruments is a 24-terminal switching regulator with a max output current of 1.8A and a max switching frequency of 800kHz. It operates b/w -40 to 85°C, suitable for industrial applications requiring boost switcher configuration in compact spaces.
1.8 A
800 kHz
TPS61130PWRG4
BATTERY CHARGE CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 5.5V
1.6 A
TPS62004DGSRG4
TPS62004DGSRG4 by Texas Instruments is a switching regulator with a max output current of 1.6A and max switching frequency of 1000kHz. It operates in industrial temperature range, suitable for applications requiring efficient power conversion in compact spaces. With a min input voltage of 2V and control mode as current-mode, it's ideal for portable electronics and battery-powered devices.
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
2 V
1.1 mm
MOS
© 2023 All rights reserved
