Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
TPS62100DRG4
Texas Instruments
TPS62100DRG4 by Texas Instruments is a VOLTAGE-MODE SWITCHING REGULATOR with 1.6A output current, 375 kHz switching frequency, and -40 to 85°C operating temperature range. Ideal for industrial applications requiring efficient power conversion in a compact SMALL OUTLINE package.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 8V; ALSO OPERATES IN PFM CONTROL TECHNIQUE
SWITCHING REGULATOR
VOLTAGE-MODE
PULSE WIDTH MODULATION
9 V
2.5 V
7.2 V
R-PDSO-G8
4.9 mm
1
8
85 Cel
-40 Cel
1.6 A
PLASTIC/EPOXY
SOP
SOP8,.25
RECTANGULAR
SMALL OUTLINE
NOT SPECIFIED
Not Qualified
1.75 mm
Switching Regulator or Controllers
YES
BUCK
375 kHz
INDUSTRIAL
GULL WING
1.27 mm
DUAL
3.9 mm
TPS62102DRG4
TPS62102DRG4 by Texas Instruments is a VOLTAGE-MODE SWITCHING REGULATOR with 1.6A output current, 1250 kHz switching frequency, and 7.2V nominal input voltage. Ideal for industrial applications requiring efficient power management in a compact SMALL OUTLINE package.
1250 kHz
TPS62110RSATG4
TPS62110RSATG4 by Texas Instruments is a 16-terminal switching regulator with VOLTAGE-MODE control mode, operating b/w -40 to 85 °C. It has a max output voltage of 16V and can handle up to 1.5A output current. Ideal for industrial applications requiring efficient power management in compact spaces.
ALSO OPERATES IN ADJUSTABLE MODE FROM 1.2V TO 16V ; PFM MODE IS ALSO AVAILABLE
17 V
3.1 V
12 V
S-PQCC-N16
e4
4 mm
2
16
1.5 A
16 V
1.2 V
HVQCCN
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
260
1 mm
1100 kHz
Nickel/Palladium/Gold (Ni/Pd/Au)
NO LEAD
.65 mm
QUAD
TPS62205DBVTG4
TPS62205DBVTG4 by Texas Instruments is a switching regulator with max output current of 0.67A, operating temp range -40 to 85°C, and max switching frequency of 1500kHz. Ideal for industrial applications requiring voltage-mode control in compact spaces due to its small outline package style.
PFM MODE ALSO AVAILABLE
6 V
3.6 V
R-PDSO-G5
2.9 mm
5
.67 A
LSSOP
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.45 mm
1500 kHz
.95 mm
1.6 mm
TPS62222DDCRG4
TPS62222DDCRG4 by Texas Instruments is a switching regulator with 5 terminals, operating temp. range of -40 to 85°C, and max output current of 0.4A. Ideal for industrial applications requiring a compact design and voltage-mode control technique for efficient power management in tight spaces.
PFM MODE IS ALSO AVAILABLE
.4 A
1.8 V
TSSOP
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.1 mm
1850 kHz
TPS62224DDCRG4
TPS62224DDCRG4 by Texas Instruments is a switching regulator with a max output current of 0.4A and a max switching frequency of 1850kHz. It operates in voltage-mode control, suitable for industrial applications requiring precise power management in compact spaces. With a small outline and thin profile package style, it offers efficient performance in limited dimensions.
1.6 V
NICKEL PALLADIUM GOLD
30
TPS64203DBVTG4
TPS64203DBVTG4 by Texas Instruments is a switching regulator with max output current of 3A, operating temp range -40 to 85°C, and max output voltage of 6.5V. Ideal for industrial applications requiring a compact design and efficient power management in a small outline package.
ALSO OPERATES IN ADJUSTABLE MODE FROM 1.2 V TO 6.5 V
SWITCHING CONTROLLER
CURRENT-MODE
6.5 V
3.8 V
R-PDSO-G6
6
3 A
SINGLE
800 kHz
TPS6735IPE4
TPS6735IPE4 by Texas Instruments is a switching regulator with 8 terminals, -5V output voltage, and 160 kHz max switching frequency. Ideal for industrial applications requiring a compact inverter design with current-mode control and pulse width modulation technology.
6.2 V
4 V
4.5 V
R-PDIP-T8
9.81 mm
.2 A
-5 V
DIP
DIP8,.3
IN-LINE
5.08 mm
5 V
NO
INVERTER
160 kHz
CMOS
THROUGH-HOLE
2.54 mm
7.62 mm
UC2524ADWG4
UC2524ADWG4 by Texas Instruments is a switching controller with voltage-mode control, operating b/w -40 to 85°C. It offers a max output current of 0.2A and a max switching frequency of 500kHz. Ideal for industrial applications requiring precise voltage regulation in compact designs.
40 V
1 V
20 V
R-PDSO-G16
10.3 mm
5.05 V
4.95 V
SOP16,.4
2.65 mm
8 V
PUSH-PULL
500 kHz
BIPOLAR
7.5 mm
UC2573DG4
The Texas Instruments UC2573DG4 is a voltage-mode switching controller with a max output voltage of 30V and max output current of 0.5A. Operating b/w -40 to 85°C, it's ideal for industrial applications requiring pulse width modulation control at up to 300kHz frequency. The small outline package with dual terminals makes it suitable for compact designs.
35 V
4.2 V
.5 A
30 V
1.5 V
300 kHz
UC28025DWG4
The Texas Instruments UC28025DWG4 is a switching controller with a max output current of 2A and a max switching frequency of 1000kHz. It operates in industrial temperature grades, with input voltage ranging from 9V to 12V, making it suitable for various power management applications. The IC features pulse width modulation control technique and buck-boost switcher configuration for efficient voltage regulation.
CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE
CURRENT/VOLTAGE-MODE
15 V
105 Cel
2 A
9.2 V
BUCK-BOOST
1000 kHz
UC2825ADWG4
UC2825ADWG4 by Texas Instruments is a switching controller with BUCK-BOOST configuration. It operates at 1000 kHz, supports 12V nominal input/output voltage, and has a max output current of 2.2A. Ideal for industrial applications requiring efficient power management in compact spaces.
CAN ALSO BE CONFIGURED IN CURRENT MODE
22 V
8.8 V
2.2 A
5.15 V
5.1 V
36 mA
BICMOS
UC2825ADWTRG4
UC2825ADWTRG4 by Texas Instruments is a switching controller with 16 terminals, operating at -40 to 85°C. It features a buck-boost switcher config, BICMOS technology, and pulse width modulation control technique. Ideal for industrial applications requiring a 12V nominal input voltage and 5.1V output voltage with a max output current of 2.2A.
UC2827DWTR-1G4
UC2827DWTR-1G4 by Texas Instruments is a 24-terminal switching controller with a max output current of 1A and a max switching frequency of 500 kHz. It operates in an industrial temperature range from -40 to 85°C, making it suitable for various power management applications requiring precise current-mode control.
CAN ALSO WORK IN CURRENT MODE
9.5 V
R-PDSO-G24
15.4 mm
3
24
1 A
SOP24,.4
UC2842AD8G4
UC2842AD8G4 by Texas Instruments is a switching controller with current-mode control technique. It operates at 500 kHz max switching frequency, supports 1 A output current, and has a buck-boost switcher config. Ideal for industrial applications requiring precise voltage regulation in a compact small outline package.
25 V
11 V
25 mA
28 V
UC2842ADTRG4
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
R-PDSO-G14
8.65 mm
14
SOP14,.25
UC2842ADWTRG4
UC2842ADWTRG4 by Texas Instruments is a current-mode switching controller with a 1A output current and 500 kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85°C, with a supply voltage range of 16-28V. The compact rectangular package is surface-mountable and features pulse width modulation control technique.
UC2842ANG4
UC2842ANG4 by Texas Instruments is a switching controller with current-mode control technique. It operates at a max frequency of 500 kHz, supporting a max output current of 1A. Ideal for industrial applications requiring precise voltage regulation in the range of 4.95V to 5.05V.
UC2842NG4
UC2842NG4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates in industrial temperature range (-40 to 85 °C) and supports PWM control technique up to 500 kHz. Ideal for buck-boost configurations, it has a max output current of 1A and nominal input voltage of 15V.
9.59 mm
UC2843AD8G4
UC2843AD8G4 by Texas Instruments is a switching controller with current-mode control technique. It operates at a max frequency of 500 kHz and supports a max output current of 1 A. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
8.2 V
8.4 V
UC2843DG4
UC2843DG4 by Texas Instruments is a current-mode switching controller with 1A output current, 500kHz max switching frequency, and 15V nominal input voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and supports buck-boost configuration in a small outline package.
UC2844NG4
UC2844NG4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates in industrial temperature range (-40 to 85 °C) and supports pulse width modulation control technique. With a max output current of 1A, it's ideal for buck-boost applications at up to 500 kHz switching frequency.
UC2845NG4
UC2845NG4 by Texas Instruments is a switching controller with a max output current of 1A and a max switching frequency of 500kHz. It is commonly used in industrial applications for pulse width modulation control in buck-boost configurations.
UC2846DWG4
UC2846DWG4 by Texas Instruments is a current-mode switching controller with BUCK-BOOST switcher config. It operates at -40 to 85 °C, with max output current of 0.5 A and freq of 500 kHz. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
7.25 V
21 mA
7.7 V
UC2848DWG4
UC2848DWG4 by Texas Instruments is a 16-terminal switching controller with a max output current of 2.2 A and a max switching frequency of 1000 kHz. It operates in industrial temperature grade range from -40 to 85 °C, making it suitable for various power management applications requiring high efficiency and precise current-mode control.
UC2849DWG4
UC2849DWG4 by Texas Instruments is a 24-terminal switching controller with a max output current of 0.3A and a max switching frequency of 550kHz. It operates in industrial temperature range, uses pulse width modulation control technique, and is ideal for applications requiring small outline package style and current-mode control.
.3 A
550 kHz
UC2852NG4
The Texas Instruments UC2852NG4 is a current-mode switching regulator with a max output current of 1A and a max switching frequency of 200kHz. It operates in an industrial temperature range, making it suitable for power factor control applications. With a package style of IN-LINE and through-hole terminal form, it offers efficient pulse width modulation control for voltages ranging from 12.5V to 30V.
POWER FACTOR CONTROLLER
12.5 V
24 V
9.78 mm
5.33 mm
200 kHz
UC2856DWG4
UC2856DWG4 by Texas Instruments is a switching controller with 16 terminals, operating at -40 to 85°C. It features a current-mode control technique, BUCK-BOOST switcher config, and supports a max output current of 2A. Ideal for industrial applications requiring precise voltage regulation in compact designs.
10.365 mm
2.64 mm
23 mA
230 kHz
UC2856DWTRG4
UC2856DWTRG4 by Texas Instruments is a switching controller with a current-mode control technique. It operates at an industrial temperature grade range of -40 to 85°C and supports a max output current of 2A. With a buck-boost switcher configuration, it is ideal for applications requiring precise voltage regulation in compact spaces.
UC2909DWTRG4
UC2909DWTRG4 by Texas Instruments is a switching regulator with a 15V nominal voltage and 242 kHz max switching frequency. It features current-mode control, operates in an industrial temperature grade range (-40 to 85 °C), and is ideal for battery charge controller applications.
BATTERY CHARGE CONTROLLER
R-PDSO-G20
12.8 mm
20
.1 A
SOP20,.4
15
Power Management Circuits
19 mA
242 kHz
UCC2570NG4
UCC2570NG4 by Texas Instruments is a switching controller with voltage-mode control technique. It operates in an industrial temperature grade range from -40 to 85°C, with a max output current of 1.2A and a max switching frequency of 500kHz. This IC is commonly used in applications requiring efficient power management and regulation.
ALSO OPERATES IN CURRENT MODE
13 V
10 V
R-PDIP-T14
19.305 mm
1.2 A
DIP14,.3
UCC2580N-1G4
UCC2580N-1G4 by Texas Instruments is a voltage-mode switching controller with 16 terminals and a max output current of 1.2A. It operates in an industrial temperature range from -40 to 85°C, making it suitable for various push-pull applications requiring a nominal input voltage of 12V.
14 V
R-PDIP-T16
DIP16,.3
430 kHz
UCC2580N-2G4
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
UCC2804D/81221G4
UCC2804D/81221G4 by Texas Instruments is a switching controller with current-mode control technique. It operates in an industrial temperature range from -40 to 85°C, with a max output current of 1A and a max switching frequency of 1000 kHz. This small outline IC is ideal for applications requiring efficient power management in compact spaces.
UCC2804DTR/81260G4
UCC2804DTR/81260G4 by Texas Instruments is a switching controller with current-mode control technique. It operates in an industrial temperature range from -40°C to 85°C, with a max output current of 1A and a max switching frequency of 1000 kHz. This small outline IC is ideal for applications requiring efficient power management in compact spaces.
UCC2806DWTRG4
UCC2806DWTRG4 by Texas Instruments is a switching controller with current-mode control technique. It operates in industrial temperature range (-40 to 85°C) and supports a max output current of 0.5A at a max switching frequency of 1MHz. Ideal for applications requiring precise voltage regulation in compact designs.
ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 15V
14.5 V
5.17 V
5.02 V
UCC28084DRG4
UCC28084DRG4 by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring precise control and efficient power management in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount applications where space is limited.
4.3 V
UCC28084PWG4
UCC28084PWG4 by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring precise control and efficient power management in compact designs. The IC features pulse width modulation control technique and push-pull switcher configuration, ideal for use in small outline, thin profile systems that demand high performance within limited space constraints.
4.4 mm
TSSOP8,.25
1.2 mm
3 mm
UCC28084PWRG4
UCC28084PWRG4 by Texas Instruments is a current-mode switching controller with a max output current of 1A and max switching frequency of 1000 kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications. The IC features a small outline package style, surface mount capability, and pulse width modulation control technique.
UCC28085PWRG4
UCC28085PWRG4 by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring precise power regulation in compact spaces. The package style is small outline, thin profile, shrink pitch, with gull wing terminals and push-pull switcher configuration.
9.3 V
UCC28089DRG4
UCC28089DRG4 by Texas Instruments is a current-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power supply applications. The package style is small outline with gull wing terminals, ideal for compact designs requiring efficient pulse width modulation control.
8.5 V
UCC2808D-1G4
UCC2808D-1G4 by Texas Instruments is a switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications. With a compact rectangular package style and surface-mount design, it offers efficient control using pulse width modulation in push-pull configuration.
20 mA
UCC2818APWRG4
UCC2818APWRG4 by Texas Instruments is a current-mode switching regulator with 1.2A output current, 250kHz max switching frequency, and BICMOS technology. It operates in industrial temperature range (-40 to 85°C) and is ideal for power factor control applications requiring a boost switcher configuration.
18 V
10.3 V
5 mm
TSSOP16,.25
4 mA
BOOST
250 kHz
UCC28221DRG4
UCC28221DRG4 by Texas Instruments is a dual switching controller with current-mode control technique. It operates in an industrial temperature grade range from -40 to 105 °C and has a max output current of 0.01 A. This small outline package with 16 terminals is ideal for push-pull switcher configurations in various applications.
DUAL SWITCHING CONTROLLER
9.9 mm
.01 A
SOP16,.25
UCC28502DWG4
UCC28502DWG4 by Texas Instruments is a current-mode switching regulator with a max output current of 1.2A and a max switching frequency of 120kHz. It operates in an industrial temperature range from -40 to 85°C, making it suitable for power factor correction applications requiring high efficiency and precise control. The device comes in a small outline package with gull wing terminals, ideal for space-constrained designs that demand reliable performance.
CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE
POWER FACTOR CONTROLLER WITH POST REGULATOR
120 kHz
UCC28502DWTRG4
UCC28502DWTRG4 by Texas Instruments is a current-mode power factor controller with post regulator. It operates in an industrial temperature range from -40 to 85°C, with a max output current of 1.2A and a max switching frequency of 120kHz. This boost switcher IC is designed for applications requiring efficient power management in compact spaces.
UCC2891DG4
UCC2891DG4 by Texas Instruments is a current-mode switching controller with a max output current of 2.5A and a max switching frequency of 1000kHz. It operates in industrial temperature grade range (-40 to 85°C) and is suitable for buck-boost applications requiring a nominal input voltage of 12V.
2.5 A
3 mA
UCC2891DRG4
UCC2891DRG4 by Texas Instruments is a current-mode switching controller with BICMOS technology. It operates at 12V nominal input voltage, supports up to 2.5A output current, and has a max switching frequency of 1000 kHz. Ideal for industrial applications requiring efficient buck-boost power conversion in compact designs.
© 2023 All rights reserved
