Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UCC28502DWG4 by Texas Instruments is a current-mode switching regulator with a max output current of 1.2A and a max switching frequency of 120kHz. It operates in an industrial temperature range from -40 to 85°C, making it suitable for power factor correction applications requiring high efficiency and precise control. The device comes in a small outline package with gull wing terminals, ideal for space-constrained designs that demand reliable performance.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Ampacity Inc.
$1.500
Semicontronic
$3.500
$3.412
$3.395
One Stop Electronics
Parana Technologies
$6.504
$7.247
AZTECH Wire
$6.959
ChromeModa Solutions
$7.308
$5.993
IDEA Electronic Components Group
$6.577
Component Stockers USA
$99.990
Corphita
DigiPath Technology Company
$6.589
Microchip USA
Corohmni
The use of plastic/epoxy package body material provides good durability and protection for the internal components of the switching regulator, making it suitable for various industrial applications.
Being surface mountable allows for easy and efficient PCB assembly, making the product convenient for production and integration into electronic devices.
Having a higher number of terminals offers more flexibility in connectivity options and circuit design, making the switching regulator versatile for different applications.
The high maximum operating temperature of 85°C ensures reliable performance even in challenging thermal environments, increasing the product's durability and longevity.
Current-mode control provides improved transient response, better stability, and protection against output short circuits, enhancing the overall performance and efficiency of the switching regulator.
The nominal input voltage of 12V is a common standard in many electronic systems, ensuring compatibility and usability in various applications.
With a maximum output current of 1.2A, the switching regulator can deliver sufficient power to meet the demands of different electronic components, making it suitable for a wide range of devices.
The boost configuration allows for step-up voltage conversion, which is useful for applications requiring higher output voltages than the input, offering flexibility and versatility in power supply design.
Switching Regulators & Controllers UCC28502DWG4 attributes and parameters. Explore more Switching Regulators & Controllers devices from Texas Instruments
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
UCC28502DWG4 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
Fairchild Semiconductor
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
Daco Semiconductor
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
TPS5430DDARG4
TPS5430DDARG4 by Texas Instruments is a switching regulator with 3A output current, 1.23V min output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and VOLTAGE-MODE control mode. Package style: SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE.
TPS82150SILR
TPS82150SILR by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max switching frequency of 2500 kHz. Ideal for automotive applications, it operates in temperatures ranging from -40 to 125°C, making it suitable for various power management needs in compact designs.
LTM4644IY#PBF
Analog Devices
Analog Devices' LTM4644IY#PBF is a 77-terminal switching regulator with a max operating temperature of 125°C. It features current-mode control, pulse width modulation, and a buck switcher configuration. Ideal for automotive applications, it has a nominal input voltage of 12V and nominal output voltage of 1.5V at a max switching frequency of 1300 kHz.
MC33063AD
MC33063AD by Texas Instruments is a voltage-mode switching regulator with 5V nominal input and output voltages up to 40V. It operates in industrial temperature range (-40°C to 85°C) with a max output current of 1.5A, making it suitable for various power supply applications. The IC features pulse width modulation control technique and buck-boost switcher configuration in a small outline package.
LM22680MRX-ADJ/NOPB
LM22680MRX-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 2A output current, 1.285V min output voltage, and 37V max output voltage. Ideal for automotive applications due to its low profile design and wide operating temperature range from -40°C to 125°C.
LM2594MX-ADJ/NOPB
LM2594MX-ADJ/NOPB by Texas Instruments is a switching regulator with max output voltage of 37V, operating temp range -40 to 125°C, and max output current of 0.5A. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and pulse width modulation control technique.
LM2596S-5.0
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LTM4644IY-1#PBF
Analog Devices' LTM4644IY-1#PBF is a switching regulator with 77 terminals, operating b/w -40 to 125°C. It features a buck switcher config, PWM control mode, and supports input voltages from 4V to 14V. Ideal for automotive applications due to its high switching frequency of 1300 kHz and compact size of 15x9mm.
TL494IN
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LTC1983ES6-5#TRMPBF
Linear Technology
SWITCHED CAPACITOR REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP1595AMNR2G
NCP1595AMNR2G by Onsemi is a current-mode switching regulator with max output current of 6.1A and max switching frequency of 1130kHz. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power management in compact spaces. The IC features pulse width modulation control technique and buck switcher configuration, making it suitable for various electronic devices.
LMZM23601SILT
LMZM23601SILT by Texas Instruments is a switching regulator with 1A output current, 1100kHz max switching frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its buck-boost configuration, it supports input voltages from 4V to 36V and offers a compact rectangular package design.
TPS40210DGQRG4
TPS40210DGQRG4 by Texas Instruments is a switching regulator with a package style of small outline, heat sink/slug, and thin profile. It operates b/w -40 to 125°C, with a min output voltage of 7V and max input voltage of 52V. Ideal for automotive applications due to its control mode (current-mode) and pulse width modulation technique.
LM2594HVM-ADJ/NOPB
LM2594HVM-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating from -40 to 125°C. It offers a wide input range of 4.5-60V and output voltage up to 37V at 0.5A max current. Ideal for automotive applications due to its compact size, PWM control technique, and buck switcher configuration.
TPS54140DGQR
TPS54140DGQR by Texas Instruments is a switching regulator with a max output current of 1.5A and max operating temp of 150°C. Ideal for automotive applications, it operates in buck configuration with PWM control mode and supports input voltages from 3.5V to 42V.
TPS63001DRCR
TPS63001DRCR by Texas Instruments is a switching regulator with a max output current of 2A and min output voltage of 3.3V, ideal for industrial applications. It operates b/w -40 to 85°C, uses pulse width modulation control technique, and has a compact square package style.
LM3150MHE/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Motorola
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ22005TZE/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Terminal Pitch: 1.27 mm; Terminal Finish: MATTE TIN; Qualification: Not Qualified;
LM2776DBVT
LM2776DBVT by Texas Instruments is a switching regulator with a small outline, low profile package. It has a max output current of 0.2A and operates at temperatures up to 85°C. This IC is commonly used in industrial applications requiring pulse frequency modulation control.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC28950PWR
UCC28950PWR by Texas Instruments is a switching controller with a max operating temperature of 125°C. It features phase-shift control technology, a max switching frequency of 1000 kHz, and is designed for automotive applications. With a package style of small outline and thin profile, this IC has 24 terminals in a rectangular shape suitable for surface mount assembly.
UCC28C45DR
UCC28C45DR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power management applications requiring precise control and efficiency. The package style is small outline with dual terminals, ideal for compact designs where space is limited.
UCC28C45DGKR
UCC28C45DGKR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power management applications. With a small outline package style and surface-mount capability, this IC is ideal for compact designs requiring efficient pulse width modulation control.
UCC28C45DRG4
UCC28C45DRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and max switching frequency of 1000kHz. It operates in industrial temperature grade range from -40 to 105°C, making it suitable for various power management applications requiring precise control and efficiency. The small outline package with gull wing terminals and pulse width modulation control technique enhances its versatility in compact designs.
UCC28070PWRG4
UCC28070PWRG4 by Texas Instruments is a current-mode power factor controller with a boost switcher configuration. It operates at a max switching frequency of 330 kHz and has a max output current of 0.75 A. This IC is designed for automotive applications, featuring a small outline package style suitable for surface mount assembly.
UCC28C43DR
UCC28C43DR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power management applications requiring precise control and high efficiency. The small outline package with surface mount capability and dual terminal position offers flexibility in design and integration.
UCC28089DR
UCC28089DR by Texas Instruments is a switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in industrial temperature grade range from -40 to 105°C, making it suitable for various power management applications. The IC features pulse width modulation control technique and push-pull switcher configuration for efficient power conversion.
UCC28C45DGK
UCC28C45DGK by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power management applications. The IC features a small outline package with dual terminals and Gull Wing form, ideal for compact designs requiring efficient pulse width modulation control.
UCC28C45DGKRG4
UCC28C45DGKRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and max switching frequency of 1000kHz. It operates in industrial temperature grade range (-40 to 105°C) and is suitable for applications requiring precise pulse width modulation control, such as power supplies and converters.
UCC28950QPWRQ1
UCC28950QPWRQ1 by Texas Instruments is a switching controller with current-mode control technique, operating at -40 to 125°C. It features a 12V nominal input/output voltage and supports a max switching frequency of 1000 kHz. Ideal for automotive applications due to AEC-Q100 screening level and compact design in small outline package.
UCC28C43DGK
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
UCC28070PWR
UCC28070PWR by Texas Instruments is a current-mode power factor controller with a boost switcher configuration. It operates at a max switching frequency of 300 kHz and has a max output current of 0.75 A. Ideal for automotive applications due to its wide temperature range and small outline package style.
UCC28950PW
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
UCC28950TPWRQ1
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
UCC28C44DR
UCC28C44DR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power supply applications. With a small outline package style and surface-mount capability, this BICMOS technology-based IC is ideal for compact designs requiring efficient pulse width modulation control.
UCC28180DR
POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
UCC28C43DRG4
UCC28C43DRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power management applications. With a small outline package style and surface-mount capability, this BICMOS technology-based IC is ideal for compact designs requiring efficient pulse width modulation control.
UCC28600DR
UCC28600DR by Texas Instruments is a switching regulator with a max output current of 1.2A and a max switching frequency of 130kHz. It is commonly used in industrial applications for controlling power supply voltages efficiently.
UCC25600DRG4
UCC25600DRG4 by Texas Instruments is a voltage-mode switching controller with BICMOS technology. It operates in automotive-grade temperatures (-40 to 125°C) and supports input voltages from 11V to 18V. With a max switching frequency of 400 kHz, it's ideal for applications requiring resonant control in compact designs.
UCC2897ARGPR
UCC2897ARGPR by Texas Instruments is a current-mode switching controller with a max output current of 2.5A and a max switching frequency of 1MHz. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various power management applications requiring high efficiency and precision control. The chip carrier package style with very thin profile and nickel palladium gold terminal finish ensures reliable performance in compact designs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved