Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MAX1763EUE
Maxim Integrated
MAX1763EUE by Maxim Integrated is a voltage-mode switching regulator with a max output current of 3.4A and a max switching frequency of 1200kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various boost applications requiring precise control through pulse width modulation. The package style is small outline, thin profile, shrink pitch with gull wing terminals for surface mount assembly.
SWITCHING REGULATOR
VOLTAGE-MODE
PULSE WIDTH MODULATION
5.5 V
.7 V
R-PDSO-G16
e0
5 mm
1
16
85 Cel
-40 Cel
3.4 A
PLASTIC/EPOXY
TSSOP
TSSOP16,.25
RECTANGULAR
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
245
Not Qualified
1.1 mm
Switching Regulator or Controllers
YES
BOOST
1200 kHz
INDUSTRIAL
TIN LEAD
GULL WING
.65 mm
DUAL
4.4 mm
MAX1774EEI
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SWITCHING CONTROLLER
28 V
2.7 V
12 V
R-PDSO-G28
9.89 mm
2
28
3 A
SSOP
SSOP28,.25
SMALL OUTLINE, SHRINK PITCH
1.73 mm
PUSH-PULL
1250 kHz
BICMOS
.635 mm
3.9 mm
MAX1822ESA
MAX1822ESA by Maxim Integrated is a small outline switched capacitor regulator with 8 terminals. It operates b/w -40 to 85°C, suitable for industrial applications. With a max switching frequency of 90 kHz, it accepts input voltages from 3.5V to 16.5V, making it ideal for various power management tasks.
SWITCHED CAPACITOR REGULATOR
16.5 V
3.5 V
5 V
R-PDSO-G8
4.9 mm
8
SOP
SMALL OUTLINE
1.75 mm
DOUBLER INVERTER
90 kHz
1.27 mm
MAX1834EUT-T
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1.5 V
2 V
R-PDSO-G6
2.9 mm
6
1 A
LSSOP
TSOP6,.11,37
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.45 mm
Power Management Circuits
.95 mm
1.625 mm
MAX1845EEI
DUAL SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DUAL SWITCHING CONTROLLER
CURRENT-MODE
4.5 V
.00005 A
620 kHz
MAX829EUK-T
MAX829EUK-T by Maxim Integrated is a small outline, low profile switched capacitor converter with 5 terminals. Operating temperature ranges from -40 to 85°C, suitable for industrial applications. Features include a max input voltage of 5.5V and switching frequency of 54.3 kHz.
SWITCHED CAPACITOR CONVERTER
R-PDSO-G5
5
240
54.3 kHz
CMOS
Tin/Lead (Sn/Pb)
20
VIPER12ADIP
STMicroelectronics
VIPER12ADIP by STMicroelectronics is a current-mode switching regulator with 8 terminals in an inline package. It operates at a max frequency of 66 kHz, handling up to 0.48 A output current. Ideal for applications requiring pulse width modulation control technique and MOS technology.
38 V
9 V
18 V
R-PDIP-T8
9.27 mm
.48 A
DIP
DIP8,.3
IN-LINE
5.33 mm
NO
SINGLE
66 kHz
MOS
THROUGH-HOLE
2.54 mm
7.62 mm
VIPER12AS
VIPER12AS by STMicroelectronics is a current-mode switching regulator with 8 terminals. It operates at a max frequency of 66 kHz and can handle up to 0.48 A output current. Ideal for applications requiring efficient power management in compact spaces.
SOP8,.25
NCP3064BPG
Onsemi
NCP3064BPG by Onsemi is a switching regulator with 1.5A output current, 190kHz switching frequency, and -40 to 125 °C operating temperature range. Ideal for automotive applications due to its hysteric current mode control technique and buck-boost switcher configuration in an 8-terminal rectangular package.
HYSTERETIC CURRENT MODE
40 V
3 V
e3
9.78 mm
125 Cel
1.5 A
NOT SPECIFIED
4.45 mm
BUCK-BOOST
190 kHz
AUTOMOTIVE
Tin (Sn)
NCV3064PG
NCV3064PG by Onsemi is a switching regulator with 1.5A output current, 190kHz max frequency, and -40 to 125 °C operating temp range. Ideal for automotive applications due to its buck-boost configuration and hysteric current mode control technique.
TPS54617RUVT
Texas Instruments
TPS54617RUVT by Texas Instruments is a 34-terminal switching regulator with VOLTAGE-MODE control, operating b/w -40 to 125°C. It offers a max output current of 6A at 3.3V and supports BUCK switcher config for automotive applications. With a max switching frequency of 1600 kHz, it's ideal for compact designs requiring high efficiency.
ALSO OPERATES IN ADJUSTABLE MODE UPTO 0.9
6 V
3.6 V
R-XQCC-N34
e4
3
34
6 A
3.3 V
.9 V
UNSPECIFIED
HQCCN
CHIP CARRIER, HEAT SINK/SLUG
260
1 mm
BUCK
1600 kHz
NICKEL PALLADIUM GOLD
NO LEAD
QUAD
30
TPS54331DG4
TPS54331DG4 by Texas Instruments is a small outline switching regulator with 8 terminals. It operates b/w -40 to 150°C, outputs up to 3A current at 25V max voltage, and uses pulse width modulation for control. Ideal for automotive applications due to its compact size and efficient buck switcher configuration.
150 Cel
25 V
.8 V
570 kHz
LM2596TADJG
LM2596TADJG by Onsemi is a 5-terminal switching regulator with max output current of 7.5A and max input voltage of 40V. Ideal for automotive applications, it operates b/w -40 to 125 °C in buck configuration at a max frequency of 180 kHz.
ALSO OPERATES IN ADJUSTABLE MODE FROM 1.23 TO 37 V
R-XSFM-T5
7.5 A
SIP5,.1,67TB
FLANGE MOUNT
180 kHz
1.7 mm
NCV8851BDBR2G
NCV8851BDBR2G by Onsemi is a switching controller with current-mode control technique, operating b/w -40 to 125 °C. It has a max input voltage of 40 V and nominal output voltage of 6 V, suitable for automotive applications due to its compact size and high switching frequency of 575 kHz.
13.2 V
R-PDSO-G20
6.5 mm
1.2 mm
575 kHz
NCP1250ASN100T1G
NCP1250ASN100T1G by Onsemi is a current-mode switching controller with 6 terminals, operating b/w -40 to 125 °C. It has a max input voltage of 28 V and peak reflow temperature of 260 °C. Ideal for automotive applications due to its small outline and pulse width modulation control technique.
9.4 V
3 mm
108 kHz
TIN
1.5 mm
NCP1250BSN100T1G
NCP1250BSN100T1G by Onsemi is a switching controller with current-mode control technique. It operates b/w -40 to 125 °C and supports input voltage range of 9.4-28 V, making it ideal for automotive applications. With a max switching frequency of 108 kHz, this small outline IC in gull wing form is suitable for compact designs.
NCP1083DEG
NCP1083DEG by Onsemi is a switching controller with current-mode control technique. It operates in industrial temperature range from -40 to 85°C, suitable for various applications. With a max input voltage of 57V and switching frequency up to 500 kHz, it offers efficient power management in compact form factor.
57 V
0 V
HTSSOP
TSSOP20,.25
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
500 kHz
MATTE TIN
NCP1083DER2G
NCP1083DER2G by Onsemi is a switching regulator with a max operating temperature of 85°C and a min operating temperature of -40°C. It has a max input voltage of 57V and is commonly used in industrial applications requiring pulse width modulation control.
NCP5211BDR2G
NCP5211BDR2G by Onsemi is a 14-terminal switching controller with PWM control technique, operating at -40 to 85°C. It offers a max output current of 1A and supports push-pull switcher configuration with a max switching frequency of 900kHz. Ideal for industrial applications requiring precise voltage/current regulation in compact designs.
CURRENT/VOLTAGE-MODE
14 V
R-PDSO-G14
8.65 mm
14
SOP14,.25
900 kHz
40
TPS62208DBVTG4
TPS62208DBVTG4 by Texas Instruments is a switching regulator with a max output current of 0.67A and a max switching frequency of 1500kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring low profile components. The package style is small outline, ideal for space-constrained designs.
PFM MODE ALSO AVAILABLE
2.5 V
.67 A
1.875 V
1500 kHz
Nickel/Palladium/Gold (Ni/Pd/Au)
1.6 mm
UC3843BVD1G
UC3843BVD1G by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates in industrial temperature range (-40 to 105°C) and is ideal for applications requiring pulse width modulation control technique.
15 V
105 Cel
BIPOLAR
UCC28503DWTRG4
UCC28503DWTRG4 by Texas Instruments is a current-mode power factor controller with post regulator. It operates in an industrial temperature range from -40 to 85°C, with a max output current of 1.2A and a max switching frequency of 120kHz. This boost switcher IC is designed for applications requiring efficient power management in compact spaces.
CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE
POWER FACTOR CONTROLLER WITH POST REGULATOR
10.3 V
12.8 mm
1.2 A
SOP20,.4
2.65 mm
120 kHz
7.5 mm
TPS62101DG4
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 8V; ALSO OPERATES IN PFM CONTROL TECHNIQUE
7.2 V
1.6 A
8 V
750 kHz
TPS62103DG4
TPS62103DG4 by Texas Instruments is a voltage-mode switching regulator with max output current of 1.6A and max switching frequency of 2500kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, with input voltage range from 2.5V to 9V and output voltage from 0.8V to 8V.
2500 kHz
UC3877DWPTRG4
UC3877DWPTRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 3A and max switching frequency of 2kHz. It operates b/w 0-70°C, ideal for commercial applications requiring precise voltage control in compact spaces.
CAN ALSO BE CONFIGURED IN CURRENT MODE
RESONANT CONTROL
20 V
11 V
17.9 mm
70 Cel
0 Cel
SOP28,.4
PHASE-SHIFT
2000 kHz
COMMERCIAL
UCC2889DTRG4
UCC2889DTRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 0.2A and a max switching frequency of 100kHz. It operates in industrial temperature grade range from -40 to 85°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
9.3 V
6.6 V
.2 A
8.6 V
100 kHz
UCC3889DG4
UCC3889DG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 0.2A and a max switching frequency of 250kHz. It operates b/w temperatures of 0 to 70°C, making it suitable for commercial applications requiring efficient buck-boost switcher configurations in compact designs.
250 kHz
UCC3889NG4
UCC3889NG4 by Texas Instruments is a VOLTAGE-MODE SWITCHING CONTROLLER with 8 terminals in an IN-LINE package. It operates b/w 0-70 °C, handles up to 0.2 A output current at 100 kHz switching frequency. Ideal for commercial applications requiring a single switcher with input voltage range of 6.6-9.3 V.
9.81 mm
5.08 mm
TL1453CNSRG4
TL1453CNSRG4 by Texas Instruments is a voltage-mode dual switching controller with a max output current of 0.021A and a max switching frequency of 500kHz. This small outline package regulator operates b/w -20°C to 85°C, making it ideal for various applications requiring precise voltage control in compact spaces.
10.2 mm
-20 Cel
.021 A
SOP16,.25
2 mm
OTHER
5.3 mm
TNY254GN
Power Integrations
TNY254GN by Power Integrations is a switching regulator with 8 terminals, operating at -40 to 125°C. It has a max output current of 0.4A and operates at a frequency of up to 48 kHz. Ideal for automotive applications due to its small outline package and matte tin terminal finish.
9.59 mm
4
.4 A
GWDIP8,.4
250
3.73 mm
.2 mA
48 kHz
6.35 mm
TOP414GN
TOP414GN by Power Integrations is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It features a max output current of 4.25A and a boost switcher configuration, suitable for automotive applications. With a compact design (9.59mm x 6.35mm), it offers pulse width modulation control at a max frequency of 132kHz.
72 V
36 V
4.25 A
132 kHz
TOP232GN
The Power Integrations TOP232GN is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and max output current of 0.8A. Ideal for automotive applications, it features voltage-mode control, pulse width modulation, and a compact rectangular package suitable for surface mount assembly.
9.655 mm
.8 A
3.65 mm
140 kHz
TOP234YN
TOP234YN by Power Integrations is a voltage-mode switching regulator with a max output current of 2.4A and a max switching frequency of 140kHz. It is designed for automotive applications, featuring an operating temperature range from -40°C to 125°C and a single switcher configuration in a rectangular package style.
R-PZFM-T5
2.4 A
TO-220
ZIP5/7,.25,.05TB
ZIG-ZAG
AP2004SG-13
Diodes Incorporated
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
27 V
300 kHz
AP2004SL-13
V62/04752-01XE
V62/04752-01XE by Texas Instruments is a switching controller with 3A output current, 2000 kHz max switching frequency, and 12V nominal input voltage. It is ideal for applications requiring resonant control in a compact small outline package with dual terminals.
10.5 V
110 Cel
-25 Cel
TPS5602IDBTRG4
TPS5602IDBTRG4 by Texas Instruments is a dual switching controller with a max output current of 3A and a control mode of current-mode. It operates in an industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in challenging environments. With a compact package style and surface-mount capability, this device offers flexibility and reliability in space-constrained designs.
7 V
R-PDSO-G30
7.8 mm
1.2 V
TSSOP30,.25,20
202.4 kHz
.5 mm
UC3578DPG4
The Texas Instruments UC3578DPG4 is a voltage-mode switching controller with a max output current of 0.8A and a max input voltage of 72V. It operates in the commercial temperature grade range from 0 to 70°C, making it suitable for various applications requiring efficient power regulation in compact spaces. With a small outline package style and surface-mount capability, this IC is ideal for designs where space-saving and high performance are essential.
10 V
9.9 mm
NCP3163BPWG
NCP3163BPWG by Onsemi is a 16-terminal switching regulator with voltage-mode control, operating b/w -40 to 85°C. It offers a max output current of 3.4A, supports buck-boost configuration, and has a max switching frequency of 300kHz. Ideal for industrial applications requiring efficient power management in compact spaces.
10.3 mm
HSOP
SOP16,.4
SMALL OUTLINE, HEAT SINK/SLUG
NCP3163BPWR2G
NCP3163BPWR2G by Onsemi is a 16-terminal switching regulator with voltage-mode control, operating b/w -40 to 85°C. It supports a max output current of 3.4A and has a buck-boost switcher configuration with a max switching frequency of 300kHz. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
NCP3163PWG
NCP3163PWG by Onsemi is a 16-terminal switching regulator with voltage-mode control, operating b/w 0-70 °C. It has a max output current of 3.4A and supports buck-boost configuration at a frequency of up to 300kHz. Ideal for commercial applications requiring efficient power management in compact spaces.
NCV3163PWG
NCV3163PWG by Onsemi is a 16-terminal switching regulator with a max output current of 3.4A and operating temp range of -40 to 125 °C. Ideal for automotive applications, it features voltage-mode control, buck-boost switcher config, and a max input voltage of 40V.
NCV3163PWR2G
NCV3163PWR2G by Onsemi is a 16-terminal switching regulator with a max output current of 3.4A and a control mode of voltage-mode. With a wide operating temperature range from -40 to 125°C, it is ideal for automotive applications requiring efficient power management in compact spaces.
PTN04050AAD
PTN04050AAD by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 85°C, and max output current of 1A. It is ideal for industrial applications requiring a nominal input voltage of 5V, with a max switching frequency of 310kHz and package style in microelectronic assembly.
2.9 V
R-PDMA-T5
-3.3 V
-15 V
MICROELECTRONIC ASSEMBLY
310 kHz
PTN04050AAH
PTN04050AAH by Texas Instruments is a single switcher regulator with 5 terminals, operating at -40 to 85°C. It has a max output current of 1A and switching frequency of 310 kHz. Ideal for industrial applications requiring a min input voltage of 2.9V and max of 7V, with an output voltage range from -15V to -3.3V.
PTN04050AAST
PTN04050AAST by Texas Instruments is a switching regulator with 5 terminals, operating b/w -40 to 85°C. It has a max output current of 1A and operates at a frequency of up to 310 kHz. Ideal for industrial applications requiring a single switcher configuration within an input voltage range of 2.9V to 7V.
R-PDMA-X5
PTN04050AAS
PTN04050AAS by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 85°C, and output current up to 1A. It is used in industrial applications for voltage conversion tasks due to its compact MICROELECTRONIC ASSEMBLY package style and high max switching frequency of 310 kHz.
235
PTN04050AAZT
PTN04050AAZT by Texas Instruments is a switching regulator with max output current of 1A, max switching frequency of 310kHz, and min input voltage of 2.9V. Ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package style and temp range from -40 to 85°C.
e1
TIN SILVER COPPER
© 2023 All rights reserved
