Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
TS5A3159ADBVRG4
Texas Instruments
TS5A3159ADBVRG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 2.5 ohm and fast switching times of 75 ns on and 50 ns off. Ideal for industrial applications requiring high isolation and low power consumption.
SPDT
100 kHz
5.5 V
0 V
R-PDSO-G6
e4
2.9 mm
1
6
64 dB
.15 ohm
2.5 ohm
85 Cel
-40 Cel
SEPARATE OUTPUT
PLASTIC/EPOXY
LSSOP
TSOP6,.11,37
RECTANGULAR
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
260
1.8/5
Not Qualified
1.45 mm
Multiplexer or Switches
.0001 mA
1.95 V
1.65 V
1.8 V
YES
50 ns
75 ns
BREAK-BEFORE-MAKE
INDUSTRIAL
Nickel/Palladium/Gold (Ni/Pd/Au)
GULL WING
.95 mm
DUAL
NOT SPECIFIED
1.6 mm
TS5A3166DBVRG4
TS5A3166DBVRG4 by Texas Instruments is a SPST switch with 3.4 ohm Ron, 19 ns switch-on time, and 64 dB isolation. Ideal for industrial applications requiring separate output switching at a bandwidth of 200 kHz. Compact design with low profile and shrink pitch package suitable for surface mount assembly.
SPST
200 kHz
7 V
-.5 V
R-PDSO-G5
NO
5
3.4 ohm
TSOP5/6,.11,37
1.8/5.5
.0008 mA
17.5 ns
19 ns
MAKE-BEFORE-BREAK
TS5A3357DCURG4
TS5A3357DCURG4 by Texas Instruments is an 8-terminal single-ended multiplexer with a supply voltage range of 1.65V to 5.5V, offering a max on-state resistance of 50 ohm and nominal bandwidth of 334 kHz. Ideal for industrial applications, it features a small outline package style and break-before-make switching for efficient signal routing.
SINGLE-ENDED MULTIPLEXER
334 kHz
R-PDSO-G8
2.3 mm
8
81 dB
.3 ohm
50 ohm
COMMON OUTPUT
VSSOP
TSSOP8,.12,20
SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH
.9 mm
.01 mA
14.5 ns
34 ns
.5 mm
2 mm
TS5A3357DCUTG4
TS5A3357DCUTG4 by Texas Instruments is an 8-terminal single-ended multiplexer with a max on-state resistance of 50 ohm. Operating in industrial temperature range, it offers 3 channels and nominal off-state isolation of 81 dB. Ideal for applications requiring high-speed switching with low resistance and compact design.
3
14 ns
32 ns
NICKEL PALLADIUM GOLD
30
TS5A4624DCKTG4
TS5A4624DCKTG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 3.3 ohm and nominal bandwidth of 90 kHz. Ideal for industrial applications requiring common output switching with low power consumption.
90 kHz
6.5 V
63 dB
3.3 ohm
TSSOP
TSSOP6,.08
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.1 mm
.0012 mA
15 ns
70 ns
.65 mm
1.25 mm
TS5A63157DBVRG4
TS5A63157DBVRG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 45 ohm and offers high isolation of 60 dB. Ideal for industrial applications requiring fast switching with a bandwidth of 371 kHz.
371 kHz
60 dB
.1 ohm
45 ohm
.00075 mA
12 ns
24 ns
TS5L100DG4
TS5L100DG4 by Texas Instruments is a 4-function SPDT switch with 16 terminals, operating at -40 to 85°C. It has a max on-state resistance of 19 ohm and switching time of 7 ns. Ideal for applications requiring low power consumption and high bandwidth in compact designs.
350 kHz
R-PDSO-G16
9.9 mm
NO/NC
4
16
40 dB
1 ohm
19 ohm
70 Cel
0 Cel
SOP
SOP16,.25
SMALL OUTLINE
6.2
1.75 mm
.1 A
.003 mA
6 V
6.2 V
4 ns
7 ns
COMMERCIAL
1.27 mm
3.9 mm
TS3USB31RSERG4
TS3USB31RSERG4 by Texas Instruments is a 2-channel DPDT switch with 8 terminals, operating at -40 to 85°C. It features a low on-state resistance of 10 ohm and fast switching times of 30 ns. Ideal for industrial applications requiring high bandwidth (1220 kHz) and minimal supply current (0.001 mA).
DPDT
1220 kHz
4.3 V
S-PQCC-N8
1.5 mm
NC
2
30 dB
.35 ohm
10 ohm
VQCCN
SQUARE
CHIP CARRIER, VERY THIN PROFILE
.6 mm
.001 mA
3 V
3.3 V
25 ns
30 ns
NICKEL PALLADIUM GOLD SILVER
NO LEAD
QUAD
SN74LVC2G53DCTRG4
SN74LVC2G53DCTRG4 by Texas Instruments is a CMOS dual single-ended multiplexer with 8 terminals, operating at temperatures from -40 to 85°C. It has a max on-state resistance of 30 ohm, switching time of 7.2 ns, and nominal bandwidth of 300 kHz. Ideal for industrial applications requiring low-profile, small-outline switches with common output and break-before-make functionality.
300 kHz
2.95 mm
50 dB
5 ohm
30 ohm
SSOP8,.16
3.3
1.3 mm
Multiplexers or Switches
2.3 V
7.9 ns
7.2 ns
CMOS
2.8 mm
TS5A9411DCKTG4
TS5A9411DCKTG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 28 ohm, switching time of 20 ns, and nominal bandwidth of 100 kHz. Ideal for industrial applications requiring low power consumption and high isolation levels.
84 dB
.06 ohm
28 ohm
2.5/5
.0005 mA
2.25 V
2.5 V
9.5 ns
20 ns
SN74LVC2G53YEAR
SN74LVC2G53YEAR by Texas Instruments is a CMOS single-ended multiplexer with 2 channels. It operates at a supply voltage range of 1.65V to 5.5V and offers a max on-state resistance of 20 ohm. With a very thin profile and fine pitch package style, it is ideal for industrial applications requiring fast switching times and low power consumption.
R-XBGA-B8
1.9 mm
20 ohm
UNSPECIFIED
VFBGA
BGA8,2X4,20
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
8.3 ns
BALL
BOTTOM
SN74LVC2G66YEAR
SN74LVC2G66YEAR by Texas Instruments is a CMOS SPST IC with 2 functions, 8 terminals, and a max on-state resistance of 20 ohm. It operates b/w -40 to 85 °C and has separate outputs with an isolation of 42 dB. Ideal for industrial applications requiring fast switching times in compact designs.
42 dB
6.9 ns
5.6 ns
CD4067BNSR
CD4067BNSR by Texas Instruments is a 16-channel single-ended multiplexer with a max supply voltage of 18V. It features a max on-state resistance of 1050 ohm and operates in temperatures ranging from -55 to 125 °C. Ideal for military-grade applications requiring precise signal switching within compact spaces.
R-PDSO-G24
15 mm
24
15 ohm
1050 ohm
125 Cel
-55 Cel
SOP24,.3
5/15
.025 A
3 mA
18 V
5 V
440 ns
650 ns
MILITARY
5.3 mm
SN65LVCP22D
SN65LVCP22D by Texas Instruments is a BICMOS technology-based cross point switch with 2 channels. It operates at a nominal voltage of 3.3V and has separate outputs with a max seated height of 1.75mm. Ideal for industrial applications requiring fast switching times and low power consumption.
CONFIGURABLE AS 2:1 MUX, 1:2 DEMUX, REPEATER OR 1:2 SIGNAL SPLITTER
CROSS POINT SWITCH
.087 mA
3.6 V
BICMOS
SN65LVCP23PWR
SN65LVCP23PWR by Texas Instruments is a BICMOS technology-based cross point switch with 2 channels, operating at a supply voltage range of 3V to 3.6V. It features separate outputs, dual terminal position, and a max switch-on/off time of 2.5ns. This industrial-grade device in small outline package is ideal for applications requiring high-speed signal multiplexing and switching.
5 mm
TSSOP16,.25
1.2 mm
2.5 ns
4.4 mm
SN65LVDS125DBT
SN65LVDS125DBT by Texas Instruments is a 3.3V multiplexer with 4 channels, BICMOS technology, and industrial temperature grade. It features separate outputs, dual terminal position, and a max switch-on time of 50ns. Ideal for applications requiring high-speed data transmission in compact spaces.
R-PDSO-G38
9.7 mm
38
TSSOP38,.25,20
6 ns
SN65LVDT125DBT
SN65LVDT125DBT by Texas Instruments is a BICMOS technology-based cross point switch with 4 channels, operating at -40 to 85 °C. It has a supply voltage range of 3-3.6 V and offers separate outputs with fast switching times of 6-50 ns. This rectangular-shaped package with gull wing terminals is ideal for industrial applications requiring high-speed signal multiplexing.
SN74LVC2G53DCUT
SN74LVC2G53DCUT by Texas Instruments is a CMOS single-ended multiplexer with 8 terminals and a supply voltage range of 1.65V to 5.5V. It features a max on-state resistance of 30 ohm, common output, and break-before-make switching for industrial applications requiring high-speed signal routing in compact spaces.
e3
Matte Tin (Sn)
SN74LVC2G53YEPR
SN74LVC2G53YEPR by Texas Instruments is a CMOS single-ended multiplexer with 2 channels. It operates at a supply voltage range of 1.65V to 5.5V and has a max on-state resistance of 20 ohm. With a very thin profile and fine pitch package style, it is ideal for industrial applications requiring fast switching times and low power consumption.
CD4097BPWR
CD4097BPWR by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at a supply voltage range of 3-18V and has a max on-state resistance of 1300 ohm. With a small outline package style, it is ideal for military-grade applications requiring high-speed switching up to 20 kHz.
DIFFERENTIAL MULTIPLEXER
20 kHz
7.8 mm
1300 ohm
TSSOP24,.25
.6 mA
CD4097BPW
CD4097BPW by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at -55 to 125 °C. It has a max supply voltage of 18 V and on-state resistance of 1300 ohm. Ideal for military-grade applications requiring small outline, thin profile packages with shrink pitch technology.
CD4067BM
CD4067BM by Texas Instruments is a CMOS multiplexer with 24 terminals, operating voltage of 5V, and on-state resistance of 1300 ohm. It is used in military-grade applications for signal switching with a bandwidth of 14 kHz. The package is small outline, surface mountable, and has separate outputs for versatile integration.
14 kHz
15.4 mm
SOP24,.4
2.65 mm
7.5 mm
CD4097BM96
DIFFERENTIAL MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD74HC4066MT
CD74HC4066MT by Texas Instruments is a CMOS SPST switch with 4 channels, 142 ohm Ron, and 200 kHz bandwidth. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring low on-state resistance and high isolation levels in compact designs.
10 V
2 V
R-PDSO-G14
8.65 mm
14
72 dB
142 ohm
SOP14,.25
2/10
.02 mA
4.5 V
45 ns
CD74HCT4066MT
CD74HCT4066MT by Texas Instruments is a CMOS SPST switch with 4 channels, 142 ohm Ron, and 200 kHz bandwidth. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring low on-state resistance and high isolation levels in compact designs.
.25 A
.16 mA
53 ns
36 ns
SN74AHC4066D
SN74AHC4066D by Texas Instruments is a CMOS SPST switch with 4 channels, 225 ohm on-state resistance, and 40 dB isolation. It operates at -40 to 85 °C and has a bandwidth of 50 kHz. Ideal for industrial applications requiring low power consumption and high-speed switching capabilities.
50 kHz
6 ohm
225 ohm
2/5.5
SN74LV4053ATPWREP
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
45 dB
2 ohm
180 ohm
105 Cel
.05 A
28 ns
SN74AUC2G66YEPR
SN74AUC2G66YEPR by Texas Instruments is a CMOS SPST IC with 2 functions, 40 ohm Ron, and 3 ns switch-on time. It operates b/w -40 to 85 °C and has a 0.5 mm terminal pitch. Ideal for industrial applications requiring low power consumption and high-speed switching capabilities.
3 ohm
40 ohm
1.2/2.5
2.7 V
.8 V
1.1 V
3 ns
CD74HC4316MT
CD74HC4316MT by Texas Instruments is a 4-function multiplexer with a supply voltage range of 1V to 5V. It features a max operating temperature of 125°C and offers separate outputs with an on-state resistance of 170 ohm. Ideal for military-grade applications requiring CMOS technology and high isolation levels.
ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
-5 V
-1 V
-4.5 V
62 dB
170 ohm
2/6,GND/-6
1 V
CD74HC4316PWT
CD74HC4316PWT by Texas Instruments is a 4-function SPST multiplexer with 16 terminals. It operates at temperatures ranging from -55 to 125°C and has a max seated height of 1.2mm. With a nominal voltage of 4.5V, it is suitable for military-grade applications requiring CMOS technology and offers an on-state resistance of 170 ohms.
SN74LV4051ATDREP
SN74LV4051ATDREP by Texas Instruments is a CMOS multiplexer with 16 terminals, operating voltage of 2-5.5V, and on-state resistance of 180 ohm. It is ideal for industrial applications requiring a bandwidth of 35 kHz, dual terminal position, and separate output voltage.
35 kHz
2.1 ohm
SN74LV4052ATDREP
SN74LV4052ATDREP by Texas Instruments is a CMOS differential multiplexer with 4 channels, 190 ohm on-state resistance, and 45 dB off-state isolation. It operates at a supply voltage range of 2-5.5 V and has a max operating temperature of 105°C. Ideal for industrial applications requiring fast switching times and low power consumption.
190 ohm
SN74LV4053ATDREP
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4051BMT
CD4051BMT by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at temperatures from -55 to 125 °C and has a bandwidth of 20 kHz. Ideal for applications requiring separate output signals in military-grade environments.
20.5 V
+-5
.01 A
20 V
720 ns
SN65LVDT125ADBT
CROSS POINT SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 38; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
.145 mA
300 ns
TS5V330PW
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
4 V
SN65LVDS250DBT
Texas Instruments SN65LVDS250DBT is a 3.3V BICMOS cross point switch with 4 channels, operating b/w -40 to 85°C. It features a small outline package with dual terminals and separate outputs, suitable for industrial applications requiring fast switching times of 6ns on and 300ns off.
SN65LVDT250DBT
SN65LVDT250DBT by Texas Instruments is a 3.3V BICMOS cross point switch with 4 channels, operating b/w -40 to 85°C. It features a small outline package with dual terminals and separate outputs, suitable for industrial applications requiring fast switching times of 300ns on and 6ns off.
TS3L100PW
TS3L100PW by Texas Instruments is a 4-channel SPDT switch with 15 ohm Ron, 0.128 A signal current, and 42 dB isolation. Ideal for applications requiring fast switching times (7.5 ns on, 3.5 ns off) and nominal bandwidth of 350 kHz in commercial temperature grades.
.128 A
3.5 ns
7.5 ns
CD74HC4016PWR
CD74HC4016PWR by Texas Instruments is a CMOS SPST multiplexer with 4 functions, operating b/w -55 to 125 °C. It has a max on-state resistance of 320 ohm and switching time of 38 ns. Ideal for military-grade applications requiring high isolation and low on-state resistance in a compact package.
320 ohm
TSSOP14,.25
29 ns
38 ns
SN65LVCP202RGET
Texas Instruments SN65LVCP202RGET is a 24-terminal cross point switch with 3.3V supplies, operating from -40 to 85°C. It features separate outputs, dual terminal position, and small outline package for industrial applications requiring high-speed signal switching in compact designs.
4 mm
HVQCCN
LCC24,.16SQ,20
1 mm
.115 mA
3.465 V
3.135 V
SN65LVCP408PAPR
Texas Instruments SN65LVCP408PAPR is an 8-channel cross point switch with a supply voltage range of 3.135V to 3.465V. It operates in industrial temperature grade (-40°C to 85°C) and has a max seated height of 1.2mm, making it suitable for various applications requiring high-speed signal switching in compact spaces.
S-PQFP-G64
10 mm
64
HTFQFP
TQFP64,.47SQ
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
440 mA
MPC506AUG4
The Texas Instruments MPC506AUG4 is a CMOS single-ended multiplexer with 28 terminals in a small outline package. It operates at temperatures ranging from -40 to 85 °C and has a max on-state resistance of 1800 ohm. Ideal for industrial applications requiring common output switching with a supply current of up to 1.5 mA.
15 V
-15 V
R-PDSO-G28
17.9 mm
28
68 dB
1800 ohm
SOP28,.4
+-15
.02 A
1.5 mA
500 ns
MPC508AU/1KG4
The Texas Instruments MPC508AU/1KG4 is an 8-channel CMOS multiplexer with a max on-state resistance of 1500 ohm and common output. It operates in industrial temperature grade range from -40 to 85 °C, making it suitable for various applications requiring fast switching times of 500 ns. The small outline package with gull wing terminals ensures easy surface mount installation in compact spaces.
10.3 mm
1500 ohm
SOP16,.4
MPC508AUG4
The Texas Instruments MPC508AUG4 is a CMOS single-ended multiplexer with 8 channels, operating at industrial temperature grade. It features a max on-state resistance of 1500 ohm and common output voltage. With a package size of 10.3mm x 7.5mm x 2.65mm, it is ideal for applications requiring fast switching times and high isolation levels in industrial settings.
MPC509AU/1KG4
The Texas Instruments MPC509AU/1KG4 is a CMOS differential multiplexer with 4 channels, operating at -40 to 85°C. It features a max on-state resistance of 1500 ohm, common output, and break-before-make switching. Ideal for industrial applications requiring low power consumption and high isolation levels.
TS5A3154DCURE4
TS5A3154DCURE4 by Texas Instruments is an 8-terminal SPDT switch with a 1.8/5 V power supply range, 2.7 ohm max on-state resistance, and -40 to 85°C operating temperature for industrial applications. It features a 0.9 mm seated height, 0.16 ohm resistance match, and MAKE-BEFORE-BREAK switching suitable for compact electronic designs requiring high isolation levels.
.16 ohm
2.7 ohm
21 ns
TS5A3154DCURG4
TS5A3154DCURG4 by Texas Instruments is an 8-terminal SPDT switch with a 1.8/5 V power supply, offering a max on-state resistance of 3.1 ohm and make-before-break switching. With a small outline package style and industrial temperature grade, it's ideal for applications requiring separate outputs and high off-state isolation in compact spaces.
3.1 ohm
© 2023 All rights reserved
