Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Graphics display drivers control and operate graphics displays in electronic systems. They are used in different applications, such as computer monitors, smartphones, tablets, and televisions.These drivers can be categorized based on their unique characteristics and applications, including LCD drivers, OLED drivers, and VGA drivers. Graphics display drivers vary in resolution, refresh rate, and color depth, and they are available in various sizes from small displays in mobile devices to large displays in televisions and monitors.Graphics display drivers are essential components of electronic systems as they drive the operation of graphics displays. The demand for high-quality graphics displays in various applications is increasing, which indicates the importance of graphics display drivers in the future.
Add filters
All
Selected
A6265KLPTR-T
Allegro MicroSystems
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR;
LED DISPLAY DRIVER
R-PDSO-G16
e3
5 mm
2
NO
1
15
16
150 Cel
-40 Cel
PLASTIC/EPOXY
HTSSOP
TSSOP16,.25
RECTANGULAR
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
260
8/40
Not Qualified
AEC-Q100
1.2 mm
Display Drivers
50 V
6.5 V
YES
AUTOMOTIVE
Matte Tin (Sn)
GULL WING
.65 mm
DUAL
40
4.4 mm
AL8806MP8-13
Diodes Incorporated
AL8806MP8-13 by Diodes Inc. is a LED display driver with 8 segments, operating at 6-30V. Its small outline package has dual terminals and matte tin finish, suitable for graphics displays requiring a nominal 12V power supply. With a compact size of 3x3.1mm and peak reflow temp of 260°C, it's ideal for space-constrained applications.
S-PDSO-G8
3.1 mm
8
TSSOP8,.19
SQUARE
SMALL OUTLINE
12
1.1 mm
30 V
6 V
12 V
MATTE TIN
30
3 mm
A8502KLPTR-T
Allegro MicroSystems' A8502KLPTR-T is a graphics display driver with 16V power supplies, 40V max supply voltage, and -40 to 125°C operating temperature range. Ideal for automotive applications due to AEC-Q100 screening level and LED display driver interface IC type.
STANDARD
24
125 Cel
10 mA
40 V
5 V
16 V
2.5 MHz
BD1601MUV-E2
ROHM
ROHM's BD1601MUV-E2 is a Graphics Display Driver with 16 terminals, operating voltage of 2.7-5.5V, and interface IC type LED DISPLAY DRIVER. It has a compact square package style suitable for applications requiring high-resolution graphics displays in limited space environments.
S-XQCC-N16
4
85 Cel
-30 Cel
UNSPECIFIED
HVQCCN
LCC16,.12SQ,20
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
NOT SPECIFIED
3.6
1 mm
5.5 V
2.7 V
3.6 V
OTHER
NO LEAD
.5 mm
QUAD
BD1604MVV-E2
ROHM's BD1604MVV-E2 is a Graphics Display Driver with 16 terminals, operating voltage of 2.7-5.5 V, and max frequency of 1.2 MHz. Ideal for LED display driver applications due to its compact square shape, low profile design, and quad terminal position.
4 mm
LCC16,.16SQ,25
1.2 MHz
TLC5960DAR
Texas Instruments
TLC5960DAR by Texas Instruments is a LED display driver with 8 channels, constant-current output, and 10-28V power supplies. Ideal for industrial applications, it operates b/w -40 to 85°C, has a small outline package style, and supports surface mount installation.
R-PDSO-G38
e4
12.5 mm
38
CONSTANT-CURRENT
TSSOP
TSSOP38,.32
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
10/28
16 mA
28 V
10 V
24 V
INDUSTRIAL
NICKEL PALLADIUM GOLD
6.1 mm
CP2400-GM
Silicon Labs
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SERIAL
SEGMENT
LIQUID CRYSTAL DISPLAY DRIVER
S-XQCC-N48
7 mm
3
128
48
1.8 V
3.3 V
CP2401-GM
CP2401-GM by Silicon Labs is a Graphics Display Driver with SEGMENT display mode and SERIAL data input. It operates b/w -40 to 85 °C, suitable for INDUSTRIAL applications. With 128 segments, it has a package size of 7x7 mm and terminal pitch of 0.5 mm.
CP2401-GQ
CP2401-GQ by Silicon Labs is a Graphics Display Driver with 128 segments, operating at 1.8-3.6V. It features SERIAL data input mode, SEGMENT display mode, and is suitable for industrial temperature grade applications requiring a LIQUID CRYSTAL DISPLAY DRIVER interface IC type.
S-PQFP-G48
TFQFP
FLATPACK, THIN PROFILE, FINE PITCH
BU97930MUV-E2
ROHM's BU97930MUV-E2 is a Graphics Display Driver with SEGMENT display mode and SERIAL data input. It operates at 1.8-3.3V, has 40 terminals, and supports up to 27 segments. Ideal for industrial applications requiring a compact chip carrier package with no lead terminals.
S-XQCC-N40
6 mm
4-BP
27
HQCCN
LCC40,.24SQ,20
CHIP CARRIER, HEAT SINK/SLUG
1.8/3.3
1.05 mm
Other Interface ICs
4 MHz
BU9798KV-E2
ROHM's BU9798KV-E2 is a graphics display driver with 49 segments, operating at 4 MHz. It supports serial data input mode and has a max supply voltage of 5.5V. Ideal for liquid crystal displays in commercial applications due to its low profile design and quad terminal position.
S-PQFP-G64
10 mm
49
64
75 Cel
LFQFP
QFP64,.47SQ,20
FLATPACK, LOW PROFILE, FINE PITCH
2/3.3,3.6/5
1.6 mm
.13 mA
COMMERCIAL EXTENDED
PCF8576CHL/1,157
NXP Semiconductors
PCF8576CHL/1,157 from NXP Semiconductors is a low-profile graphics display driver ideal for dot matrix applications. It operates b/w 2-6V with a max supply current of 0.12mA and supports multiplexed displays with up to 5 digits. Its robust design suits industrial environments, functioning in temperatures from -40 °C to 85 °C.
DOT MATRIX
5-DIGIT
2/6
.12 mA
2 V
3 V
.315 MHz
AL8807MP-13
AL8807MP-13 by Diodes Inc. is a LED display driver with 8 terminals, operating voltage range of 6-30V, and temp grade for automotive applications. It comes in a small outline package with matte tin finish, suitable for graphics displays requiring high temperature tolerance up to 125°C.
2.95 mm
HSSOP
SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
AL8807W5-7
AL8807W5-7 by Diodes Inc. is a LED display driver with 8 segments, operating at 6-30V. It has a small outline package style, suitable for automotive applications due to its wide temperature range (-40 to 125°C) and low profile design (1.45mm seated height).
R-PDSO-G5
5
LSSOP
TSOP5/6,.11,37
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.45 mm
.95 mm
HVLED805
STMicroelectronics
HVLED805 by STMicroelectronics is a LED display driver with 16 terminals and a supply voltage range of 11.5V to 23V. Its compact rectangular package makes it suitable for graphics displays, offering power supplies up to 14V for driving up to 3 segments efficiently.
9.9 mm
SOP
SOP16,.25
14
1.75 mm
23 V
11.5 V
14 V
Nickel/Palladium/Gold (Ni/Pd/Au)
1.27 mm
3.9 mm
TLC5948DBQR
TLC5948DBQR by Texas Instruments is a graphics display driver with 16 segments, serial data input mode, and 33 MHz min fmax. It is used in LED displays for industrial applications due to its small outline package and wide operating temperature range of -40 to 85°C.
R-PDSO-G24
8.65 mm
SSOP
SMALL OUTLINE, SHRINK PITCH
.635 mm
33 MHz
TLC5948DBQ
TLC5948DBQ by Texas Instruments is a graphics display driver with 16 segments, serial data input mode, and 33 MHz min fmax. It is ideal for LED display driver applications, featuring a small outline package with dual terminals and operating temperature range of -40 to 85°C.
TLC5948PWP
TLC5948PWP by Texas Instruments is a graphics display driver with 16 segments, operating at 3.3V nominal voltage and 33MHz min fmax. It features serial data input mode, segment display mode, and is suitable for LED display driver applications in industrial settings.
7.8 mm
FL7701M
Fairchild Semiconductor
FL7701M by Fairchild Semiconductor is a LED display driver with 8 terminals, operating voltage of 15.5V, and temperature range from -40 to 125°C. It is designed for automotive applications, featuring a small outline package shape and matte tin terminal finish for surface mount assembly.
R-PDSO-G8
4.9 mm
SOP8,.25
15.5
15.5 V
SC4541SKTRT
Semtech
Semtech SC4541SKTRT is a LED display driver with 7 segments, operating voltage range of 2.9V to 22V. It has a small outline package style suitable for industrial temperature grade applications. The terminal finish is matte tin with dual position gull wing terminals, making it ideal for graphics display drivers.
R-PDSO-G6
2.9 mm
7
6
TSOP6,.11,37
22 V
2.9 V
2.4 MHz
STLED325QTR
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
DIGIT
S-XQCC-N32
32
LCC32,.2SQ,20
4.5 V
CMOS
.4 MHz
TLC5929RGET
TLC5929RGET by Texas Instruments is a graphics display driver with 24 terminals, operating voltage range of 3-5.5V, and constant-current output. It features serial data input mode, industrial temperature grade, and quad terminal position. Ideal for LED displays, it has a compact square package style suitable for surface mount applications.
S-PQCC-N24
LCC24,.16SQ,20
3.3/5
.04 mA
TPS61187RTJT
TPS61187RTJT by Texas Instruments is a LED display driver with 6 channels, 60 segments, and 12V nominal voltage. It operates in industrial temperature range (-40 to 85 °C) and supports up to 24V max supply voltage. Ideal for graphics displays, it comes in a square chip carrier package with very thin profile.
S-PQCC-N20
60
20
LCC20,.16SQ,20
.8 mm
4 mA
.05 MHz
NCP1840Q8A6MNG
Onsemi
NCP1840Q8A6MNG by Onsemi is a SERIAL graphics display driver with 20 terminals, operating voltage range of 3.3V to 5.5V, and industrial temperature grade up to 85 °C. It is ideal for LED display applications requiring a max frequency of 0.4 MHz in a compact chip carrier package style.
S-XQCC-N20
3.4
TIN
NCP1840Q8A6MNTWG
NCP1840Q8A6MNTWG by Onsemi is a SERIAL graphics display driver with 20 terminals, operating voltage range of 3.3V to 5.5V, and industrial temperature grade up to 85 °C. It is designed for LED display applications requiring a max frequency of 0.4 MHz in a compact chip carrier package with very thin profile.
PCA85132U/2DA/Q1,0
PCA85132U/2DA/Q1,0 by NXP is a robust graphics display driver designed for industrial applications. It supports 80 characters and 160 segments with a wide operating temp range of -40 °C to 95 °C. This AEC-Q100 compliant driver operates on dual power supplies (2/5V) and features low current consumption at 0.06 mA.
80-CHARACTER
160
95 Cel
DIE OR CHIP
2/5
.06 mA
PCA85132U/2DB/Q1,0
PCA85132U/2DB/Q1,0 by NXP is a DOT MATRIX LCD driver with a max supply voltage of 8V and operates in -40 °C to 95 °C. It supports serial data input and features multiplexed display capability for up to 20 digits. Ideal for industrial applications requiring robust performance.
SEATED HGT-NOM
R-XUUC-N197
6.5 mm
20-DIGIT
197
DIE
UNCASED CHIP
.4 mm
8 V
UPPER
1.16 mm
PCA85176T/Q900/1,1
The PCA85176T/Q900/1 by NXP Semiconductors is a CMOS graphics display driver designed for segment displays. It operates within a supply voltage range of 1.8V to 5.5V, supports up to 16 digits, and features AEC-Q100 screening for industrial applications. With a compact design and multiplexed capability, it's ideal for automotive and consumer electronics.
R-PDSO-G56
14 mm
16-DIGIT
56
TSSOP56,.3,20
.02 mA
PCA8533U/2DD/2,026
PCA8533U/2DD/2,026 by NXP Semiconductors is a CMOS graphics display driver designed for industrial applications. It operates b/w -40 °C to 85 °C, supports up to 35 characters with 80 segments, and requires power supplies of 2-5V. Ideal for segment displays in harsh environments.
35-CHARACTER
80
PCA8576DU/2DA/Q2,0
PCA8576DU/2DA/Q2,0 from NXP is a robust LCD driver designed for industrial applications, supporting 20 characters and 40 segments. It operates within -40 °C to 85 °C and requires power supplies of 2/5V or 3/6V. This AEC-Q100 compliant device features a low supply current of just 0.03 mA.
20-CHARACTER
2/5,3/6
.03 mA
PCA9922PW,112
PCA9922PW,112 from NXP Semiconductors is a segment display driver with a 5V nominal supply and operates in temperatures from -40 °C to 85 °C. It features serial data input and supports up to 8 segments. Ideal for compact graphics applications, it comes in a thin profile package.
25 MHz
PCA9922PW,118
PCA9922PW,118 from NXP Semiconductors is a segment display driver with a 5V nominal voltage and operates in temperatures from -40 °C to 85 °C. It features a compact 16-terminal design and supports serial data input. Ideal for industrial graphics applications, it ensures reliable performance in tight spaces.
PCF85132U/2DA/1,02
PCF85132U/2DA/1,02 by NXP is a versatile graphics display driver ideal for industrial applications. It supports a 5V nominal voltage, operates in DOT MATRIX mode, and features a serial data input. With a wide temp range (-40 °C to 85 °C), it ensures reliable performance in various environments.
2/5,1.8/8
.002 MHz
PCF85176T/1,118
PCF85176T/1,118 by NXP Semiconductors is a DOT MATRIX display driver with SERIAL data input mode. It operates at 1.8-5.5V and supports up to 40 segments for industrial-grade applications requiring multiplexed display capability.
R-PDSO-N56
SON
2.5 V
PCF8533U/2/F2,026
PCF8533U/2/F2,026 by NXP is a CMOS graphics display driver designed for DOT MATRIX displays. It operates with a supply voltage range of 1.8V to 6.5V and supports serial data input, making it ideal for industrial applications in harsh environments. With a max temp of 85 °C and low power consumption (0.06 mA), it's perfect for energy-efficient LCDs.
X-XUUC-N
PCF8562TT/2,118
PCF8562TT/2,118 by NXP Semiconductors is a DOT MATRIX display driver with SERIAL data input mode. It operates at 1.8-5.5 V and has 16-DIGIT display capability. Ideal for industrial applications requiring multiplexed displays in a compact form factor.
R-PDSO-G48
36
TSSOP48,.3,20
PCF8562TT/S400/2,1
PCF8562TT/S400/2,1 by NXP is a CMOS graphics display driver ideal for industrial applications. It supports a 16-digit dot matrix display with a serial data input mode and operates b/w 1.8V to 6.5V, ensuring versatility in various environments. Its compact design features 48 terminals and can withstand temperatures from -40 °C to 85 °C.
PCF8562TT/S400/2,5
The PCF8562TT/S400/2.5 by NXP is a CMOS graphics display driver ideal for industrial applications, supporting 16 digits and a 4-BP multiplexed display. It operates b/w 1.8V to 6.5V with a max temp of 85 °C, ensuring reliability in various environments. Its compact SOIC package makes it suitable for space-constrained designs.
PCF8576CHL/1,118
PCF8576CHL/1,118 by NXP Semiconductors is a graphics display driver with 40 segments and 20 characters. It operates at temperatures ranging from -40 to 85°C and has a max supply current of 0.12 mA. Ideal for liquid crystal displays, this IC features a quad terminal position and gull wing form factor for industrial-grade applications.
QFP
FLATPACK
PCF8576CT/S480/1,1
The PCF8576CT/S480/1 by NXP is a CMOS graphics display driver ideal for LCD applications, featuring a 5V nominal voltage and supporting up to 40 segments. It operates in a temperature range of -40 °C to 85 °C and utilizes serial data input. This compact device comes in a rectangular package with 56 terminals, ensuring efficient surface mounting.
21.5 mm
SOP56,.6,30
245
3.3 mm
.75 mm
11.05 mm
PCF8576DT/S400/2,1
PCF8576DT/S400/2,1 by NXP is a CMOS graphics display driver ideal for industrial applications. It supports a 20-digit dot matrix display with a serial data input mode and operates within a supply voltage range of 1.8V to 6.5V. Its compact design features 56 terminals and AEC-Q100 screening for reliability in harsh environments.
44
STLD41PUR
STLD41PUR by STMicroelectronics is a LED display driver with 8 terminals, operating at 5.5V. It has a temperature range of -40 to 85 °C, suitable for industrial applications. The package is small outline, surface mountable, and made of plastic/epoxy material.
R-PDSO-N8
SOLCC8,.12,25
5.5
CL8800K63-GM935
Supertex
Supertex CL8800K63-GM935 is a LED display driver in a 33-terminal chip carrier package. Features matte tin finish, 0.5mm terminal pitch, and quad position. Ideal for graphics displays requiring surface mount technology with plastic/epoxy body material.
S-PQCC-N33
33
QCCN
LCC33/36,.24SQ,20
CHIP CARRIER
TLC5948ADBQ
TLC5948ADBQ by Texas Instruments is a graphics display driver with 16 segments, operating voltage of 3-5.5V, and constant-current output. It features serial data input mode, small outline package style, and dual terminal position. Ideal for LED display applications in industrial settings due to its high temperature tolerance and moisture sensitivity level of 2.
SSOP24,.24
18 mA
HV5812PJ-G-M904
Microchip Technology
HV5812PJ-G-M904 by Microchip Tech is a Graphics Display Driver with 28 terminals, operating voltage range of 4.5-80V, and temp grade for automotive applications. It features serial data input mode, true output polarity, and HVCMOS technology suitable for vacuum fluorescent displays. The chip carrier package is surface mountable with dimensions of 11.506mm x 11.506mm x 4.572mm.
VACUUM FLUORESCENT DISPLAY DRIVER
S-PQCC-J28
11.506 mm
28
TRUE
QCCJ
LDCC28,.49SQ
4.572 mm
80 V
20 V
HVCMOS
J BEND
LED7708
LED7708 by STMicroelectronics is a LED display driver with 48 terminals, operating at 12V supply voltage. It comes in a square chip carrier package and is surface mountable. Ideal for graphics displays, this IC has a terminal pitch of 0.5mm and no lead terminal form.
S-PQCC-N48
LCC48,.27SQ,20
LP8552TLE
LP8552TLE by Texas Instruments is a graphics display driver with 12 segments, operating voltage range of 5.5V to 22V, and serial data input mode. It features a grid array package style with very thin profile and fine pitch, suitable for LED display driver applications in various electronic devices.
S-PBGA-B25
2.466 mm
25
VFBGA
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
.675 mm
BALL
BOTTOM
TC62D722CFNG
Toshiba
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HTSSOP; Package Shape: RECTANGULAR;
CAN ALSO OPERATE WITH VDD=5V
TSSOP24,.25
7 mA
BCDMOS
30 MHz
© 2023 All rights reserved
