Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.
Add filters
All
Selected
BK1005LL100-T
Taiyo Yuden
BK1005LL100-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.11 ohm, and output impedance of 10 OHM. Ideal for applications requiring filtering at frequencies from 100 MHz with a rated current of 0.5 A in surface mount configurations.
0402
Chip Bead
.11 ohm
FERRITE CHIP
100 MHz
.5 mm
e3
1 mm
Ferrite
SURFACE MOUNT
1
2
125 Cel
-55 Cel
10 OHM
TAPE AND REEL
L1.0XB0.5XH0.5 (mm)/L0.039XB0.02XH0.02 (inch)
.5 A
Other Filters
Tin (Sn) - with Nickel (Ni) barrier
0.5
BK1005LL470-T
The Taiyo Yuden BK1005LL470-T is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers an output impedance of 47 ohms and can operate b/w -55°C to 125°C. With dimensions of L1.0xB0.5xH0.5 (mm), it is suitable for noise suppression in circuits up to 100 MHz frequency range.
.33 ohm
47 OHM
.35 A
BK20104M121-T
BK20104M121-T by Taiyo Yuden is a Ferrite Chip Data Line Filter with 8 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.0xH0.45 (mm), it is ideal for surface mount applications requiring an output impedance of 120 ohm and rated current of 0.1 A.
.3 ohm
.45 mm
2 mm
8
120 OHM
L2.0XB1.0XH0.45 (mm)/L0.079XB0.039XH0.018 (inch)
.1 A
1.0
BK20104M601-T
BK20104M601-T by Taiyo Yuden is a FERRITE CHIP filter with 8 terminals, rated for 0.1A current and 600 ohm output impedance. It operates b/w -55 to 125 °C, ideal for data line filtering in surface mount applications due to its compact size of L2.0xB1.0xH0.45 (mm).
.7 ohm
600 OHM
BK20104S121-T
BK20104S121-T by Taiyo Yuden is a FERRITE CHIP filter with 8 terminals, rated for 0.1A current. With dimensions of L2.0XB1.0XH0.45 (mm), it has an output impedance of 120 OHM and max operating temp of 125 °C. Ideal for data line filtering in surface mount applications.
BK32164L241-T
FERRITE CHIP; Maximum DC Resistance: .75 ohm; Rated Current: .15 A; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -55 Cel; Height: .8 mm;
.75 ohm
.8 mm
3.2 mm
240 OHM
L3.2XB1.6XH0.8 (mm)/L0.126XB0.063XH0.031 (inch)
.15 A
1.6
BK32164M102-T
BK32164M102-T by Taiyo Yuden is a FERRITE CHIP data line filter with 1 function and 8 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is commonly used for noise suppression in electronic devices.
.8 ohm
1000 OHM
BK32164M121-T
Taiyo Yuden's BK32164M121-T is a Ferrite Chip Data Line Filter with 8 terminals, 120 ohm output impedance, and 0.2 ohm max DC resistance. Operating b/w -55 to 125 °C, it is ideal for surface mount applications requiring a compact L3.2XB1.6XH0.8 mm size and 0.15 A rated current.
.2 ohm
BK32164M601-T
Taiyo Yuden's BK32164M601-T is a FERRITE CHIP filter with 8 terminals, 600 OHM output impedance, and 0.6 ohm max DC resistance. Ideal for data line applications, it operates b/w -55 to 125 °C and has dimensions of L3.2XB1.6XH0.8 mm.
.6 ohm
BK32164S601-T
BK32164S601-T by Taiyo Yuden is a FERRITE CHIP filter with 8 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L3.2xB1.6xH0.8 (mm), it is ideal for data line filtering applications due to its output impedance of 600 OHM and rated current of 0.2 A.
.45 ohm
.2 A
BKP1608HS101-T
BKP1608HS101-T by Taiyo Yuden is a multilayer chip data line filter with 2 terminals. It has a max operating temperature of 85°C and a min operating temperature of -55°C. This ferrite chip filter has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. It is commonly used for noise suppression in electronic devices such as smartphones and tablets.
0603
Multilayer Chip
.05 ohm
1.6 mm
85 Cel
100 OHM
L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch)
1.7 A
Other Passive Filters
0.8
BKP1608HS181-T
BKP1608HS181-T by Taiyo Yuden is a 0603 multilayer chip data line filter with FERRITE CHIP construction. It operates b/w -55 to 85 °C, has 180 OHM output impedance, and can handle up to 1.5A current. Ideal for applications requiring noise suppression in circuits operating at frequencies up to 100 MHz.
.075 ohm
180 OHM
1.5 A
BKP1608HS271-T
Taiyo Yuden's BKP1608HS271-T is a 0603 multilayer chip data line filter with 2 terminals. It operates b/w -55 to 85 °C, has a DC resistance of 0.11 ohm, and an output impedance of 270 OHM. Ideal for surface mount applications in filtering signals up to 100 MHz with a rated current of 1.2 A.
270 OHM
1.2 A
BKP1608HS330-T
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .025 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
.025 ohm
33 OHM
3 A
BKP1608HS391-T
BKP1608HS391-T by Taiyo Yuden is a 0603 multilayer chip data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 85 °C, and offers an output impedance of 390 OHM at a frequency range of 100 MHz. Ideal for surface mount applications requiring effective noise filtering in electronic circuits.
.14 ohm
390 OHM
1 A
BKP1608HS600-T
BKP1608HS600-T by Taiyo Yuden is a 0603 multilayer chip data line filter with FERRITE CHIP construction. It has a max operating temperature of 85°C and min frequency of 100 MHz. Ideal for applications requiring a compact surface mount filter with an output impedance of 60 ohms.
.04 ohm
60 OHM
2.5 A
BKP2125HS221-T
BKP2125HS221-T by Taiyo Yuden is a 0805 multilayer chip data line filter with 2 terminals. It operates b/w -55 to 85 °C, has a DC resistance of 0.05 ohm, and an output impedance of 220 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
0805
.85 mm
220 OHM
L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch)
2 A
1.25
BKP2125HS600-T
Taiyo Yuden's BKP2125HS600-T is an 0805 multilayer chip data line filter with 2 terminals. Featuring a ferrite chip construction, it offers a max operating temp of 85°C and min of -55°C. Ideal for applications requiring a 60Ω output impedance at frequencies ranging from 100 MHz, this surface mount filter has dimensions of L2.0xB1.25xH0.85 (mm) and can handle up to 3A rated current.
SBSMC0500474MXB
Knowles Precision Devices
SBSMC0500474MXB by Knowles Precision Devices is a FEED THROUGH CAPACITOR with 50V rated voltage, 470000uF capacitance, and 20A rated current. With max insertion loss of 60dB, it's ideal for data line filtering applications. Operating temperature ranges from -55 to 125 °C.
C-TYPE CIRCUIT
470000 uF
.005 ohm
FEED THROUGH CAPACITOR
3.18 mm
60 dB
5.7 mm
BULK
L5.7XB5.0XH3.18 (mm)/L0.224XB0.197XH0.125 (inch)
20 A
50 V
Matte Tin (Sn)
5.0
BLA2ABD601SN4D
Murata Manufacturing
Murata Manufacturing's BLA2ABD601SN4D is a FERRITE CHIP data line filter with 4 functions and 8 terminals. It has a max operating temperature of 125°C and min of -55°C, with dimensions L2.0xB1.0xH0.5 (mm). Ideal for applications requiring output impedance of 600 ohm, rated current 0.1 A, and surface mounting type.
ARRAY TYPE
4
TAPE
L2.0XB1.0XH0.5 (mm)/L0.079XB0.039XH0.02 (inch)
TIN
2761001111
Fair-rite Products
Fair-rite Products' 2761001111 is a FERRITE BEAD filter with -55 to 125 °C operating temp range. With 3.5mm diameter, it offers 56 OHM impedance for data line filtering applications using THROUGH HOLE MOUNT method.
3.5
FERRITE BEAD
THROUGH HOLE MOUNT
56 OHM
D3.5XL4.45 (mm)/D0.138XL0.175 (inch)
Matte Tin (Sn) - with Nickel (Ni) barrier
2761002111
Fair-rite Products' 2761002111 is a FERRITE BEAD filter with -55 to 125 °C operating temp range. With 3.5mm diameter, it offers 113 OHM output impedance for data line filtering applications. This THROUGH HOLE MOUNT component has Matte Tin finish and is ideal for EMI suppression in electronic circuits.
113 OHM
D3.5XL8.9 (mm)/D0.138XL0.35 (inch)
2761004111
Fair-rite Products' 2761004111 is a FERRITE BEAD filter with -55 to 125 °C operating temp, 3.5mm diameter, and 94 OHM impedance. Ideal for data line filtering applications due to its THROUGH HOLE MOUNT design and Matte Tin finish with Nickel barrier.
94 OHM
D3.5XL7.6 (mm)/D0.138XL0.3 (inch)
2761007112
Fair-rite Products' 2761007112 is a FERRITE BEAD filter with -55 to 125 °C operating temp range. Featuring 3.5mm diameter, 125 OHM impedance, it's ideal for data line filtering applications. Packed in TAPE AND REEL format, it offers THROUGH HOLE MOUNT installation ease.
125 OHM
D3.5XL9.5 (mm)/D0.138XL0.374 (inch)
2761008111
Fair-rite Products' 2761008111 is a FERRITE BEAD filter with max temp of 125°C and min temp of -55°C. It has an output impedance of 144Ω, diameter of 3.5mm, and matte tin finish. Ideal for data line filtering applications due to its THROUGH HOLE MOUNT design and compact D3.5XL11.4mm size.
144 OHM
D3.5XL11.4 (mm)/D0.138XL0.45 (inch)
2761009111
Fair-rite Products' 2761009111 is a FERRITE BEAD filter with -55 to 125 °C operating temp range. With 175 OHM output impedance, it's ideal for data line filtering applications. Featuring Matte Tin finish and THROUGH HOLE MOUNT, its compact size of D3.5XL13.8 (mm) makes it suitable for various electronic devices.
175 OHM
D3.5XL13.8 (mm)/D0.138XL0.545 (inch)
2773002111
Fair-rite Products' 2773002111 is a FERRITE BEAD filter with -55 to 125 °C operating temp, 115 OHM impedance, and D3.5mm size. Ideal for data line filtering applications, it features Matte Tin finish and THROUGH HOLE MOUNTing method in BULK packaging.
IMPEDANCE AT 25 MHZ
115 OHM
2773003111
Fair-rite Products' 2773003111 is a FERRITE BEAD filter with -55 to 125 °C operating temp range. With 3.5mm diameter and 86 OHM output impedance, it's ideal for data line filtering applications. Through hole mount type with Matte Tin finish, this component comes in bulk packaging.
86 OHM
D3.5XL6.7 (mm)/D0.138XL0.263 (inch)
2773009111
Fair-rite Products' 2773009111 is a FERRITE BEAD data line filter with a max operating temperature of 125°C and min operating temperature of -55°C. It has an output impedance of 170Ω and is suitable for THROUGH HOLE MOUNT applications.
170 OHM
DLW5BSM801TQ2L
Murata Manufacturing DLW5BSM801TQ2L is a data line filter with 2 functions, rated at 50V and 2A. It has a min insulation resistance of 10 Mohm and operates b/w -40 to 105°C. This surface mount filter with dimensions of L5.0xB5.0xH4.5 (mm) is ideal for applications requiring high impedance filtering in compact spaces.
.056 ohm
DATA LINE FILTER
4.5 mm
10 Mohm
5 mm
105 Cel
-40 Cel
550 OHM
TR, EMBOSSED, 7 INCH
L5.0XB5.0XH4.5 (mm)/L0.197XB0.197XH0.177 (inch)
DLP11SN161SL2L
Murata Manufacturing's DLP11SN161SL2L is a Data Line Filter with 2 functions, rated at 5V and 0.12A. It offers a max operating temperature of 85°C and min insulation resistance of 100 Mohm. Ideal for applications requiring surface mount filters with dimensions of L1.25xB1.0xH0.82mm such as data transmission systems.
MAGNETICALLY SHIELDED ONE CIRCUIT TYPE
2.7 ohm
.82 mm
100 Mohm
1.25 mm
160 OHM
L1.25XB1.0XH0.82 (mm)/L0.049XB0.039XH0.032 (inch)
.12 A
5 V
DLP31DN441ML4L
Murata Manufacturing's DLP31DN441ML4L is a Data Line Filter with 4 functions, rated at 10V and 0.07A. It offers a max DC resistance of 4.3 ohm and an output impedance of 440 ohm. This filter is designed for applications requiring high insulation resistance and operates within -40 to 85°C temperature range.
COMMON MODE CHOKE
4.3 ohm
1.15 mm
440 OHM
L3.2XB1.6XH1.15 (mm)/L0.126XB0.063XH0.045 (inch)
.07 A
10 V
HF50ACB201209-T
TDK
TDK's HF50ACB201209-T is a Ferrite Chip Data Line Filter with 2 terminals, 0805 case code. Operating temp -40 to 125°C, DC resistance 0.1 ohm, output impedance 11 ohm. Ideal for noise suppression in data lines at frequencies up to 100 MHz.
L-TYPE CIRCUIT
.1 ohm
.9 mm
11 OHM
L2.0XB1.25XH0.9 (mm)/L0.079XB0.049XH0.035 (inch)
.6 A
HF50ACB321611-T
The TDK HF50ACB321611-T is a 1206 FERRITE CHIP filter with 2 terminals. It operates b/w -40 to 125 °C, has a DC resistance of 0.2 ohm, and an output impedance of 31 OHM at 100 MHz. Ideal for data line filtering in surface mount applications due to its compact L3.2XB1.6XH1.1 (mm) size and 0.5 A rated current capacity.
1206
1.1 mm
31 OHM
TR
L3.2XB1.6XH1.1 (mm)/L0.126XB0.063XH0.043 (inch)
HF70ACB201209-T
HF70ACB201209-T by TDK is an 0805 FERRITE CHIP filter with 2 terminals. It operates b/w -40 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 10 OHM. Ideal for data line filtering applications due to its compact size (L2.0XB1.25XH0.9 mm) and rated current of 0.6 A in surface mount configurations.
HF70ACB321611-T
TDK's HF70ACB321611-T is a 1206 FERRITE CHIP filter with 2 terminals. It operates b/w -40 to 125 °C, has 0.2 ohm DC resistance, and 26 OHM output impedance at 100 MHz. Ideal for data line filtering in surface mount applications due to its compact L3.2XB1.6XH1.1 mm size.
26 OHM
HF70ACB453215-T
TDK's HF70ACB453215-T is a Ferrite Chip Data Line Filter with 2 terminals, operating from -40 to 125°C. With dimensions of L4.5xB3.2xH1.5 mm, it offers an output impedance of 120Ω and rated current of 0.3A. Ideal for surface mount applications in data lines, ensuring effective filtering at frequencies ranging from 100 MHz.
1812
.4 ohm
1.5 mm
L4.5XB3.2XH1.5 (mm)/L0.177XB0.126XH0.059 (inch)
.3 A
3.2
NFM21HC471R1H3D
Murata Manufacturing's NFM21HC471R1H3D is a data line filter with 1000 Mohm insulation resistance, AEC-Q200 screening level, and 50V rated voltage. Ideal for automotive applications due to its FEED THROUGH CAPACITOR type, 470uF capacitance, and -55 to 125 °C operating temperature range.
470 uF
1000 Mohm
3
AEC-Q200
TIN OVER NICKEL
QPI-3LZ-01
Vicor
Vicor's QPI-3LZ-01 is a TUV-approved data line filter module with 16 terminals, rated for 24V and 0.008A. Operating temperature ranges from -40 to 125°C, with an output impedance of 50Ω. Ideal for surface mount applications requiring high-performance filtering in electronic systems.
TUV
DATA LINE FILTER MODULE
4.42 mm
24.867 mm
16
50 OHM
.008 A
24 V
24.867
EMIF03-SIM01
STMicroelectronics
EMIF03-SIM01 by STMicroelectronics is a compact data line filter designed for surface mount applications. It operates b/w -40 °C to 85 °C, features a max DC resistance of 105Ω, and offers 35µF capacitance. Ideal for protecting sensitive electronics in various devices.
35 uF
105 ohm
.65 mm
e0
1.57 mm
PLASTIC
L1.57XB1.57XH0.65 (mm)/L0.062XB0.062XH0.026 (inch)
Data Line Filters
TIN LEAD
1.57
EMIF08-2005QEJ
EMIF08-2005QEJ by STMicroelectronics is a surface mount ferrite chip filter with 16 terminals, ideal for data line applications. It features a compact size of 3x3 mm, an output impedance of 200 Ω, and a capacitance of 45 µF. Packaged in tape and reel, it ensures efficient assembly in electronic devices.
45 uF
3 mm
EMIF
200 OHM
L3XB3XH1 (mm)/L0.118XB0.118XH0.039 (inch)
HR2220V801R-00
Laird Technologies
HR2220V801R-00 by Laird Technologies is a 75V FERRITE CHIP filter with 800 OHM output impedance. It operates b/w -55 to 125 °C, has 0.01 ohm DC resistance, and supports up to 8A current. Ideal for data line filtering in surface mount applications due to its compact L5.59XB5.08XH3.45 mm size.
.01 ohm
3.45 mm
5.59 mm
HR
800 OHM
L5.59XB5.08XH3.45 (mm)/L0.22XB0.2XH0.136 (inch)
8 A
75 V
5.08
ACF321825-102-TD01
TDK's ACF321825-102-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 140 MHz. It has a rated voltage of 20 V, 0.15 ohm DC resistance, and dimensions of L3.2XB1.8XH2.5 mm. Ideal for data line filtering applications due to its high insulation resistance and compact surface mount design.
T-TYPE FILTER
140 MHz
25 dB
1000 uF
.15 ohm
2.5 mm
L3.2XB1.8XH2.5 (mm)/L0.126XB0.071XH0.098 (inch)
20 V
1.8
ACF321825-220-TD01
ACF321825-220-TD01 by TDK is a FERRITE CHIP filter with 25 dB attenuation at 700 MHz, rated for 20V and 0.3A. Ideal for data line applications, it offers compact dimensions of L3.2xB1.8xH2.5mm and high insulation resistance of 1000 Mohm.
700 MHz
22 uF
ACF321825-223-TD01
ACF321825-223-TD01 by TDK is a FERRITE CHIP data line filter with 1 function. It has a rated voltage of 20V and offers attenuation of 25dB at max frequency of 55MHz. This surface mount filter is suitable for applications requiring high insulation resistance and low DC resistance.
55 MHz
22000 uF
ACF321825-471-TD01
TDK ACF321825-471-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 180 MHz. It offers 1000 Mohm insulation resistance, rated voltage of 20 V, and 0.15 ohm max DC resistance. Ideal for data line filtering in surface mount applications due to its compact dimensions (L3.2XB1.8XH2.5 mm).
180 MHz
ACF321825-682-TD01
TDK ACF321825-682-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 75 MHz. It has a rated voltage of 20 V, capacitance of 6800 uF, and rated current of 0.3 A. Ideal for data line filtering in surface mount applications due to its compact dimensions (L3.2XB1.8XH2.5 mm).
75 MHz
6800 uF
ACF451832-221-TD01
ACF451832-221-TD01 by TDK is a Data Line Filter with 1000 Mohm Min. Insulation Resistance, 50V Rated Voltage, and 25 dB Attenuation at 250 MHz. Ideal for noise suppression in data lines, it's a surface mount filter measuring L4.5xB1.8xH3.2mm, suitable for applications requiring up to 0.3A rated current.
250 MHz
220 uF
L4.5XB1.8XH3.2 (mm)/L0.177XB0.071XH0.126 (inch)
© 2023 All rights reserved
