Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EMIF08-2005QEJ by STMicroelectronics is a surface mount ferrite chip filter with 16 terminals, ideal for data line applications. It features a compact size of 3x3 mm, an output impedance of 200 Ω, and a capacitance of 45 µF. Packaged in tape and reel, it ensures efficient assembly in electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
IDEA Electronic Components Group
$1.175
$1.057
MKK Technologies
$2.209
DigiPath Technology Company
AZTECH Wire
$10.740
Native Components
$236.490
$231.760
$229.395
$227.030
Northwest PG Solutions
$260.139
A-Z Elektronik GmbH
Authorized Procurement Solutions
Corphita
Parana Technologies
$1.405
Kepictronics
Having 16 terminals provides versatile connection options, making integration into various systems seamless.
Ferrite chip technology is known for effectively reducing high-frequency noise, ensuring better signal integrity for data lines.
Matte tin finish enhances solderability and compatibility with various circuit board materials, ensuring reliable electrical connections.
Compact size allows for space-efficient designs, making it suitable for densely packed circuit boards.
The small length contributes to minimizing board space usage while maintaining effective filtering characteristics.
With an output impedance of 200 ohms, this product is optimized for specific applications, reducing signal reflections and improving performance.
The tape and reel packing method enables easier automated assembly processes and increases production efficiency.
Surface mount technology enhances circuit board density and reliability, facilitating high-speed assembly and better performance.
These compact dimensions allow for flexibility in design layouts and are ideal for a wide range of electronic applications.
Plastic packaging provides sufficient protection while being lightweight, ensuring durability during handling and installation.
A low profile of 1 mm is beneficial for applications requiring minimal height and can fit into tight spaces.
A capacitance of 45 uF makes this filter effective in stabilizing voltage and minimizing noise in data line applications.
Data Line Filters EMIF08-2005QEJ attributes and parameters. Explore more Data Line Filters devices from STMicroelectronics
Capacitance:
Filter Type:
Height:
JESD-609 Code:
Length:
Manufacturer Series:
Mounting Type:
No. of Functions:
No. of Terminals:
Output Impedance (ohm):
Package Material:
Packing Method:
Dimensions:
Sub-Category:
Terminal Finish:
Width (mm):
EMIF08-2005QEJ Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Microsemi
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
742792642
Wuerth Elektronik & Kg
Wurth Elektronik 742792642 is a multi-layer FERRITE CHIP filter with 2 terminals, ideal for data line applications. With dimensions of 1.6x0.8x0.8mm and a max frequency of 300 MHz, it offers an output impedance of 470 ohms. Operating b/w -55 to 125°C, it has a rated current of 0.95A and DC resistance of 0.45 ohm for effective noise suppression in surface mount installations.
BLM18KG601SN1D
Murata Manufacturing
Murata Manufacturing's BLM18KG601SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 0.8mm width. Operating b/w -55 to 125 °C, it has a DC resistance of 0.15 ohm and output impedance of 600 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies ranging from 100 MHz.
BNX016-01
Murata Manufacturing's BNX016-01 is a 3-function data line filter with 40 dB max insertion loss, rated for 25V and 15A. With dimensions of L12.0xB11.0xH8.0 mm, it operates b/w -40 to 125 °C and has an output impedance of 50 ohm. Ideal for applications requiring noise suppression in data lines.
EMI2121MTTAG
EMI2121MTTAG by Onsemi is a Data Line Filter with 8 terminals, rated for 0.1A current. With a compact size of L2.2xB2.0xH0.8mm, it offers an output impedance of 50 ohms and capacitance of 0.8uF. Ideal for IEC-approved applications requiring surface mount filters in data lines.
PBY201209T-600Y-N
Yageo
Yageo's PBY201209T-600Y-N chip bead filter features 2 terminals, matte tin finish, and 60 ohm output impedance. With dimensions of L2.0XB1.25XH0.9 (mm), it is ideal for data line filtering applications at frequencies ranging from 100 MHz to DC resistance of 0.03 ohm. This surface mount component has a rated current of 3 A and is packed in tape and reel format for easy installation.
EMI103T-RC
Bourns
Bourns EMI103T-RC is a 3-terminal data line filter with 10,000 Mohm insulation resistance and 50V rated voltage. It offers 25dB attenuation at max frequency of 15MHz, making it ideal for noise suppression in electronic circuits. With dimensions of L9.0xB3.2xH8.0 mm, this through-hole mount filter has a rated current of 5A and capacitance of 10,000uF.
BKP2125HS221-T
Taiyo Yuden
BKP2125HS221-T by Taiyo Yuden is a 0805 multilayer chip data line filter with 2 terminals. It operates b/w -55 to 85 °C, has a DC resistance of 0.05 ohm, and an output impedance of 220 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
BMB2A0060LN2
TE Connectivity's BMB2A0060LN2 is a 0805 multilayer chip data line filter with 2 terminals. Featuring ferrite chip construction, it offers 60 OHM output impedance and operates b/w -55 to 125 °C. Ideal for surface mount applications, this compact filter measures L2XB1.2XH.9 mm and is rated for 0.85 A current, making it suitable for noise suppression in high-frequency circuits up to 100 MHz.
EMI4192MTTAG
EMI4192MTTAG by Onsemi is a Data Line Filter with 2 functions and 10 terminals. It has a max operating temperature of 85°C, DC resistance of 5 ohm, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a capacitance of 1.3 uF in plastic/epoxy packages.
BLM18AG601SN1B
Murata's BLM18AG601SN1B is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.38 ohm and operates b/w -55°C to 125°C. This ferrite chip filter has an output impedance of 600 ohm and is rated for a current of 0.5A, making it suitable for noise suppression in circuits up to 100MHz frequency range.
744822301
Wurth Elektronik 744822301 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 1000uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.035 ohm, and rated current of 3A. Ideal for applications requiring noise suppression in data lines.
742792653
Wurth Elektronik 742792653 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 600 OHM at frequencies ranging from 100 MHz to 200 MHz.
BL01RN1A1D2B
Murata BL01RN1A1D2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range. Through-hole mount, D3.6xH5.0mm dimensions make it ideal for noise suppression in electronic circuits.
MPZ1608S101ATAH0
TDK
The TDK MPZ1608S101ATAH0 is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, with dimensions of 1.6x0.8x0.8mm and a max frequency of 100MHz. Ideal for noise suppression in electronic circuits requiring impedance of 100 ohms at frequencies above 100MHz.
MMZ1608Y102BTA00
TDK MMZ1608Y102BTA00 is a 0603 chip bead filter with max operating temp of 125°C and min of -55°C. With dimensions L1.6xB0.8xH0.8 (mm), it has a DC resistance of 0.5 ohm and output impedance of 1000 ohm, suitable for data line filtering applications.
SNUF6401MNT1G
SNUF6401MNT1G by Onsemi is a data line filter with 6 functions, AEC-Q100 screening level, and 12 terminals. It operates b/w -40°C to 85°C, has a max DC resistance of 115 ohm, and output impedance of 50 ohm. Widely used in automotive applications for noise filtering in data lines due to its compact dimensions (L3.0XB1.35XH1.0 mm).
BLM15HG102SN1D
Murata Manufacturing's BLM15HG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 1.1 ohm and an output impedance of 1000 ohm for frequencies ranging from 100MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BK1005HS102-T
BK1005HS102-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers a max operating temperature of 125°C and a min frequency of 100 MHz. With dimensions of L1.0xB0.5xH0.5 (mm), this filter has a max DC resistance of 0.58 ohm and an output impedance of 1000 OHM, making it suitable for high-frequency filtering tasks in electronic circuits.
ACM2520-102-2P-T002
The TDK ACM2520-102-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 20V and 0.2A. With dimensions of L2.5xB2.0xH1.2 (mm), it offers high insulation resistance for data line filtering applications in electronics, operating b/w -40 to 85 °C.
TPD6F003DQDR
Texas Instruments
TPD6F003DQDR by Texas Instruments is a data line filter with 6 functions and 12 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L2.6xB1.45xH0.8 (mm), it is ideal for applications requiring high capacitance filtering in compact spaces like consumer electronics or industrial equipment.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EMIF04-1005M8
DATA LINE FILTER; Maximum DC Resistance: 110 ohm; Rated Voltage: 10 V; Width (mm): 1.5; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e4;
EMIF02-USB03F2
EMIF02-USB03F2 by STMicroelectronics is a DATA LINE FILTER with 2 functions and 11 terminals. It has a capacitance of 20uF, operates b/w -40 to 85°C, and uses matte tin finish. Ideal for applications requiring IEC approvals in surface mount configurations.
EMIF06-MSD02N16
STMicroelectronics' EMIF06-MSD02N16 is a 16-terminal data line filter with max temp of 85°C and min temp of -30°C. It features nickel palladium gold finish, surface mounting type, and compact dimensions (L3.55xB1.25xH0.55 mm). Ideal for applications requiring effective filtering in compact spaces.
EMIF06-USD14F3
EMIF06-USD14F3 by STMicroelectronics is a data line filter with 6 functions and 15 terminals. It operates b/w -30°C to 85°C, with a capacitance of 12uF. This surface mount filter is ideal for applications requiring IEC and UL approvals.
EMIF06-MSD04F3
DATA LINE FILTER; Maximum DC Resistance: 44 ohm; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Mounting Type: SURFACE MOUNT; Height: .605 mm; Maximum Operating Temperature: 85 Cel;
EMIF01-10005W5
FERRITE CHIP; Length: 2 mm; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 100 OHM; JESD-609 Code: e3; No. of Functions: 1;
EMIF04-1K030F3
DATA LINE FILTER; Capacitance: 24 uF; Mounting Type: SURFACE MOUNT; Width (mm): 1.17; Approvals (V): IEC; Minimum Operating Temperature: -40 Cel;
EMIF04-EAR02M8
DATA LINE FILTER; Packing Method: TR; Dimensions: L1.75XB1.55XH0.6 (mm)/L0.069XB0.061XH0.024 (inch); JESD-609 Code: e3; Approvals (V): UL; IEC; Length: 1.75 mm;
EMIF03-SIM02M8
EMIF03-SIM02M8 by STMicroelectronics is a DATA LINE FILTER with 3 functions and 8 terminals. It has a capacitance of 17uF, operates b/w -40 to 85°C, and is approved by IEC. Ideal for surface mount applications in various electronic devices.
EMIF02-MIC02F1
FERRITE CHIP; Minimum Operating Temperature: -40 Cel; Length: 1.57 mm; Capacitance: 16 uF; Dimensions: L1.57XB1.07XH0.65 (mm); Output Impedance (ohm): 470 OHM;
EMIF01-TV02F3
DATA LINE FILTER; Maximum DC Resistance: 75 ohm; Mounting Type: SURFACE MOUNT; No. of Functions: 1; Capacitance: 330 uF; Length: .89 mm;
EMIF02-MIC02F3
DATA LINE FILTER; Maximum DC Resistance: 470 ohm; Approvals (V): IEC; Dimensions: L1.17XB0.77XH0.605 (mm)/L0.046XB0.03XH0.024 (inch); Length: 1.17 mm; Width (mm): 0.77;
EMIF02-MIC01F2
DATA LINE FILTER; Length: 1.92 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Height: .65 mm; No. of Functions: 2;
EMIF01-TV01F3
DATA LINE FILTER; Maximum DC Resistance: 75 ohm; Capacitance: 30 uF; No. of Terminals: 4; Package Material: PLASTIC; Mounting Type: SURFACE MOUNT;
EMIF02-MIC02F2
DATA LINE FILTER; Maximum DC Resistance: 517 ohm; Package Material: PLASTIC; Height: .65 mm; Maximum Operating Temperature: 85 Cel; Dimensions: L1.42XB0.92XH0.65 (mm)/L0.056XB0.036XH0.026 (inch);
EMIF01-10018W5
FERRITE CHIP; Length: 2.2 mm; Width (mm): 1.35; Maximum Operating Temperature: 85 Cel; Packing Method: TAPE AND REEL; Capacitance: 180 uF;
EMIF02-MIC03C2
DATA LINE FILTER; Maximum DC Resistance: 68 ohm; No. of Functions: 2; Capacitance: 100 uF; Width (mm): 1.07; Minimum Operating Temperature: -40 Cel;
EMIF010-COM01F2
DATA LINE FILTER; Maximum DC Resistance: 220 ohm; No. of Functions: 10; Capacitance: 45 uF; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT;
EMIF01-1003M3
DATA LINE FILTER; Maximum DC Resistance: 100 ohm; Width (mm): 0.6; Minimum Operating Temperature: -40 Cel; Height: .5 mm; Mounting Type: SURFACE MOUNT;
EMIF02-02OABRY
DATA LINE FILTER; Width (mm): 3.05; Length: 3.05 mm; No. of Functions: 1; Mounting Type: SURFACE MOUNT; Height: .9 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved