Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Data line filters are electronic filters that are used to filter out noise and interference from data communication lines. They are designed to provide a high level of attenuation of unwanted frequencies while allowing the desired data signal to pass through with minimal distortion.Data line filters use a combination of passive and active components, including resistors, capacitors, inductors, and op-amps, to filter out noise and interference from data communication lines. They can be designed for a wide range of communication standards, including Ethernet, USB, HDMI, and other data communication protocols.Data line filters can be designed as low-pass filters, which allow low-frequency signals to pass through while attenuating high-frequency signals, or as band-stop filters, which block a specific range of frequencies while allowing other frequencies to pass through. They can also be designed with multiple stages of filtering to provide increased attenuation of unwanted frequencies.Data line filters are commonly used in a variety of electronic systems, including computers, telecommunication equipment, medical equipment, and industrial control systems. They are also used in data centers and other applications where high-speed data communication is critical.
Add filters
All
Selected
DLP0NSC280HL2L
Murata Manufacturing
Murata Manufacturing's DLP0NSC280HL2L is a Data Line Filter with 2 functions, rated at 5V and 0.1A. It offers a max operating temperature of 85°C and min insulation resistance of 100 Mohm. Ideal for applications requiring noise suppression in data lines.
1.3 ohm
DATA LINE FILTER
.45 mm
100 Mohm
.85 mm
SURFACE MOUNT
2
4
85 Cel
-40 Cel
28 OHM
TAPE
L0.85XB0.65XH0.45 (mm)/L0.033XB0.026XH0.018 (inch)
.1 A
5 V
0.65
MCZ1210AD121T002
TDK
MCZ1210AD121T002 by TDK is a chip bead data line filter with 2 functions, rated at 5V. It offers a min insulation resistance of 1 Mohm and operates b/w -40 to 85°C. Ideal for applications requiring noise suppression in circuits with frequencies up to 100 MHz.
0504
Chip Bead
.2 ohm
FERRITE CHIP
100 MHz
.5 mm
1 Mohm
e3
1.25 mm
Ferrite
120 OHM
TAPE AND REEL
L1.25XB1.0XH0.5 (mm)/L0.049XB0.039XH0.02 (inch)
.5 A
Other Passive Filters
Tin (Sn) - with Nickel (Ni) barrier
1.0
NFL21SP206X1C7D
Murata Manufacturing's NFL21SP206X1C7D is a 3-terminal data line filter with 1000 Mohm insulation resistance and 16V rated voltage. With inductance of 0.7uH, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring capacitance of 240uF.
PI-TYPE CIRCUIT
240 uF
.7 uH
1000 Mohm
2 mm
1
3
125 Cel
-55 Cel
L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch)
16 V
TIN
1.25
BK0603HR102-T
Taiyo Yuden
The Taiyo Yuden BK0603HR102-T is a Ferrite Chip Data Line Filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With a DC resistance of 1.15 ohm, it is suitable for surface mount applications requiring an output impedance of 1000 ohm at a rated current of 0.22 A.
1.15 ohm
.3 mm
.6 mm
1000 OHM
TR, PAPER
.22 A
0.3
BK0603HR122-T
BK0603HR122-T by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 0.2A current and 1200Ω output impedance. Operating b/w -55°C to 125°C, it's ideal for data line filtering in surface mount applications.
1200 OHM
.2 A
BKP1005EM121-TV
BKP1005EM121-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 1.55A current and 120 ohm output impedance. It operates b/w -55°C to 125°C, ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
.085 ohm
1 mm
TR, EMBOSSED PAPER, 7 INCH
1.55 A
AEC-Q200
0.5
BKP1005EM221-TV
BKP1005EM221-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With an output impedance of 220Ω, it operates b/w -55°C to 125°C. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level.
.15 ohm
220 OHM
1 A
MEA1608LC220T001
MEA1608LC220T001 by TDK is a 4-function data line filter with 10 terminals, rated at 6.3V and 0.1A. With dimensions of L1.6XB0.8XH0.5 (mm), it operates b/w -40 to 85 °C and has a capacitance of 22uF. Ideal for surface mount applications in various electronic devices requiring noise filtering capabilities.
22 uF
1.6 mm
10
TR, 7 INCH
L1.6XB0.8XH0.5 (mm)/L0.063XB0.031XH0.02 (inch)
6.3 V
0.8
BLM18SN220TN1D
Murata's BLM18SN220TN1D is a FERRITE CHIP filter with 2 terminals, rated for 5A current. With an output impedance of 22Ω, it operates b/w -55°C to 125°C. Ideal for data line filtering in surface mount applications.
.005 ohm
22 OHM
5 A
MCF12102H900-T
DATA LINE FILTER; Maximum DC Resistance: 2.5 ohm; Rated Current: .15 A; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 90 OHM; Maximum Operating Temperature: 85 Cel;
2.5 ohm
.55 mm
90 OHM
Tape, Embossed
.15 A
CM7060R301R-10
Laird Technologies
Laird Technologies' CM7060R301R-10 is a Data Line Filter with 2 functions, rated at 80V and 5A. With a min insulation resistance of 10 Mohm, it operates b/w -40 to 125 °C. Ideal for applications requiring surface mount filters with high impedance and low DC resistance.
.01 ohm
3.8 mm
10 Mohm
7 mm
300 OHM
80 V
6
MCZ1210DH900L2TA0G
The TDK MCZ1210DH900L2TA0G is a data line filter with 2 functions, rated at 5V and 0.1A. It offers a min insulation resistance of 10 Mohm and an output impedance of 90 ohm. Ideal for applications requiring noise filtering in electronic circuits with limited space constraints.
3 ohm
0805USBF-172MRC
Coilcraft
0805USBF-172MRC by Coilcraft is a DATA LINE FILTER with inductance of 0.101uH and max DC resistance of 0.22ohm. It operates b/w -40 to 125°C, suitable for automotive applications due to AEC-Q200 screening level.
.22 ohm
1.4 mm
.101 uH
2.03 mm
TR, Plastic, 7 Inch
Matte Tin (Sn) - with Nickel (Ni) barrier
1.27
WTCF2012FHM121PB
Walsin Technology
Walsin Technology's WTCF2012FHM121PB is a Data Line Filter with 2 functions, rated at 50V. It offers a max operating temperature of 125°C and min insulation resistance of 10 Mohm. Ideal for applications requiring noise filtering in data lines with surface mounting type.
.35 ohm
1.2 mm
TR, EMBOSSED, PLASTIC, 7 INCH
.33 A
50 V
1.2
W2H11A2218AT1F
KYOCERA AVX
W2H11A2218AT1F by KYOCERA AVX is a data line filter with 100V rated voltage, 220uF capacitance, and 0.5A rated current. It features a feed through capacitor design for noise suppression in electronic circuits. Ideal for surface mount applications requiring high insulation resistance and operating temperatures from -55°C to 125°C.
220 uF
FEED THROUGH CAPACITOR
1.14 mm
2.01 mm
TR, EMBOSSED, 7 INCH
L2.01XB1.25XH1.14 (mm)/L0.079XB0.049XH0.045 (inch)
100 V
TIN OVER NICKEL
MCF12102H500-T
Taiyo Yuden's MCF12102H500-T is a 2-function data line filter with 5V rated voltage. It operates b/w -40 to 85°C, has a max DC resistance of 1.5 ohm, and output impedance of 50 ohm. Ideal for surface mount applications, it measures L1.25xB1.0xH0.55mm and is packed in TR format, suitable for various electronic devices requiring noise filtering in data lines.
1.5 ohm
50 OHM
TR
L1.25XB1.0XH0.55 (mm)/L0.049XB0.039XH0.022 (inch)
.16 A
NFP0QSN112HL2D
Murata Manufacturing's NFP0QSN112HL2D is a Data Line Filter with 2 functions, rated at 5V. It has a min insulation resistance of 100 Mohm and operates b/w -40 to 85 °C. This filter has a max DC resistance of 3.9 ohm and an output impedance of 90 OHM, suitable for surface mount applications in various electronic devices.
3.9 ohm
.65 mm
PAPER, TR, 7 INCH
DLW5ATH151MQ2L
DLW5ATH151MQ2L by Murata Manufacturing is a Data Line Filter with 2 functions, rated at 50V and 3A. It offers a max operating temperature of 125°C and min insulation resistance of 10 Mohm. Ideal for applications requiring noise suppression in automotive electronics due to AEC-Q200 screening level compliance.
.02 ohm
2.2 mm
5 mm
150 OHM
3 A
3.6
DLW5ATH450TQ2K
DLW5ATH450TQ2K by Murata Mfg: Data Line Filter with 4A current, 50V voltage rating. Features 10 Mohm insulation resistance, -40 to 125 °C operating temp range. Ideal for automotive applications due to AEC-Q200 screening level compliance.
.013 ohm
45 OHM
TR, EMBOSSED, 13 INCH
4 A
DLW5ATH500MQ2K
DLW5ATH500MQ2K by Murata Mfg is a Data Line Filter with 50V rated voltage, 4A rated current, and 10 Mohm min insulation resistance. It has 2 functions and operates b/w -40 to 125 °C. Ideal for applications requiring noise suppression in automotive electronics.
DLW5ATH501MQ2K
DLW5ATH501MQ2K by Murata Manufacturing is a data line filter with 2 functions. It has a rated voltage of 50V and can operate in temperatures ranging from -40°C to 125°C. It is commonly used for applications requiring high insulation resistance and low DC resistance.
.034 ohm
500 OHM
2 A
NFP0QHB542HS2D
NFP0QHB542HS2D by Murata Manufacturing is a data line filter with 2 functions, rated at 5V and 0.1A. It has a min insulation resistance of 100 Mohm and operates b/w -40°C to 85°C. This surface mount filter is ideal for applications requiring noise suppression in data lines.
1.95 ohm
TR,PAPER, 7 INCH
LCF121002A650TG
Littelfuse
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; Rated Current: .1 A; Output Impedance (ohm): 65 OHM; Packing Method: TR, 7 INCH; Minimum Insulation Resistance: 10 Mohm;
4 ohm
1.27 mm
65 OHM
CERAMIC
LCF121002A750TG
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; Rated Current: .1 A; Width (mm): 1; Package Material: CERAMIC; Packing Method: TR, 7 INCH;
75 OHM
LCF121002B650TG
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; Rated Current: .25 A; Packing Method: TR, 7 INCH; Width (mm): 1; Length: 1.27 mm;
.25 A
LCF121002S750TG
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; Rated Current: .1 A; Width (mm): 1; No. of Terminals: 4; Length: 1.27 mm;
LCF160804A750TG
DATA LINE FILTER; Maximum DC Resistance: 6 ohm; Rated Current: .1 A; Minimum Operating Temperature: -40 Cel; Height: .5 mm; Length: 1.6 mm;
6 ohm
8
LCF201202A121TG
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; Rated Current: .1 A; Length: 2 mm; Package Material: CERAMIC; Width (mm): 1.2;
.8 mm
LCF201204A181TG
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; Rated Current: .1 A; No. of Terminals: 8; Width (mm): 1.2; Packing Method: TR, 7 INCH;
180 OHM
LCF201204A300TG
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; Rated Current: .1 A; Package Material: CERAMIC; Height: .8 mm; Packing Method: TR, 7 INCH;
30 OHM
LCF300806A750TG
DATA LINE FILTER; Maximum DC Resistance: 6 ohm; Rated Current: .1 A; No. of Terminals: 12; Maximum Operating Temperature: 85 Cel; No. of Functions: 6;
3.05 mm
12
0.85
RT8132-12-3M6
Schaffner Holding Ag
RT8132-12-3M6 by Schaffner Holding Ag is a UL-approved data line filter with 2 functions, rated voltage of 600V, and inductance of 3600uH. It operates b/w -40°C to 100°C, has a max DC resistance of 0.014 ohm, and rated current of 12A. Ideal for applications requiring noise suppression in data lines.
UL
.014 ohm
51
33 mm
3600 uH
THROUGH HOLE MOUNT
100 Cel
12 A
600 V
RT8132-16-3M0
The Schaffner Holding Ag RT8132-16-3M0 is a UL-approved data line filter with 600V rated voltage and 16A rated current. Featuring 3000uH inductance, it operates b/w -40°C to 100°C. Ideal for applications requiring noise suppression in data lines, it has a through-hole mounting type and measures 57mm in diameter and 37mm in height.
57
37 mm
3000 uH
16 A
BMB2A0300BN7
TE Connectivity
TE Connectivity's BMB2A0300BN7 is a FERRITE CHIP filter with 2 terminals, rated at 0.2A. With a width of 1.2mm and height of 0.9mm, it operates b/w -55 to 125 °C. Ideal for data line applications due to its output impedance of 300 OHM and max DC resistance of 0.5 ohm.
.5 ohm
.9 mm
NFZ2MSM301SN10L
NFZ2MSM301SN10L by Murata is a FERRITE CHIP filter with 2 terminals, 1.6mm width, and 300 OHM output impedance. It operates b/w -40 to 85 °C, has 0.03 ohm DC resistance, and supports up to 3.1A current. Ideal for data line filtering in surface mount applications due to its compact size and high impedance rating.
.03 ohm
3.1 A
1.6
BLM03BC800SZ1D
Murata Manufacturing's BLM03BC800SZ1D is a FERRITE CHIP filter with 2 terminals, rated for 0.1A current and 80 ohm output impedance. Operating b/w -55°C to 125°C, it is ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
1.45 ohm
80 OHM
TR, PAPER, 7 INCH
L0.6XB0.3XH0.3 (mm)/L0.024XB0.012XH0.012 (inch)
BLM03BD241SZ1D
FERRITE CHIP; Maximum DC Resistance: .9 ohm; Rated Current: .2 A; No. of Functions: 1; Additional Features: AEC-Q200; Screening Level: AEC-Q200;
.9 ohm
240 OHM
BLM03BD601SZ1D
Murata Manufacturing's BLM03BD601SZ1D is a FERRITE CHIP filter with 2 terminals, AEC-Q200 screening. It has a max operating temp of 125°C, DC resistance of 1.8 ohm, and output impedance of 600 OHM. Ideal for data line filtering in automotive applications due to its compact size (L0.6xB0.3xH0.3 mm) and surface mounting type.
1.8 ohm
600 OHM
BLM03PG330SZ1D
Murata Manufacturing's BLM03PG330SZ1D is a FERRITE CHIP filter with 2 terminals, rated at 0.75A. It has an output impedance of 33 ohm and operates b/w -55 to 125°C. Commonly used in data line applications due to its compact size (L0.6xB0.3xH0.3 mm) and surface mounting type.
.14 ohm
33 OHM
.75 A
BLM15AX300SZ1D
Murata Manufacturing's BLM15AX300SZ1D is a FERRITE CHIP filter with 30 OHM output impedance, 1.1A rated current, and -55 to 125 °C operating temperature range. AEC-Q200 screened for automotive applications, it's a surface mount data line filter measuring L1.0xB0.5xH0.5mm.
.11 ohm
L1.0XB0.5XH0.5 (mm)/L0.039XB0.02XH0.02 (inch)
1.1 A
BLM15BA050SZ1D
Murata Manufacturing's BLM15BA050SZ1D is a FERRITE CHIP filter with 2 terminals, AEC-Q200 screening. It has a max operating temp of 125°C, min of -55°C, and DC resistance of 0.15 ohm. Ideal for data line filtering applications due to its compact size (L1.0xB0.5xH0.5 mm) and rated current of 0.3A.
5 OHM
.3 A
BLM18BD221SZ1D
FERRITE CHIP; Maximum DC Resistance: .45 ohm; Rated Current: .25 A; Terminal Finish: TIN; Width (mm): 0.8; Height: .8 mm;
.45 ohm
LCFA121002B900TG
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; Rated Current: .15 A; Screening Level: AEC-Q200; Minimum Operating Temperature: -40 Cel; Width (mm): 1;
LCFA201202A900TG
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; Rated Current: .1 A; No. of Functions: 2; Height: .8 mm; Maximum Operating Temperature: 125 Cel;
LCFA201204A101TG
DATA LINE FILTER; Maximum DC Resistance: 4 ohm; Rated Current: .1 A; Minimum Operating Temperature: -40 Cel; Length: 2 mm; Maximum Operating Temperature: 125 Cel;
100 OHM
LCFE060502A350TG
DATA LINE FILTER; Maximum DC Resistance: 5.5 ohm; Rated Current: .05 A; Mounting Type: SURFACE MOUNT; Packing Method: TR, 7 INCH; Package Material: CERAMIC;
1.7 uF
5.5 ohm
.35 mm
.68 mm
35 OHM
.05 A
0.55
LCFE160804A180TG
DATA LINE FILTER; Maximum DC Resistance: 6 ohm; Rated Current: .1 A; No. of Terminals: 10; Mounting Type: SURFACE MOUNT; Minimum Insulation Resistance: 10 Mohm;
18 OHM
LCFE300806A750TG
DATA LINE FILTER; Maximum DC Resistance: 6 ohm; Rated Current: .1 A; Rated Voltage: 5 V; Packing Method: TR, 7 INCH; Mounting Type: SURFACE MOUNT;
2 uF
14
© 2023 All rights reserved
