Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SBSMC0500474MXB by Knowles Precision Devices is a FEED THROUGH CAPACITOR with 50V rated voltage, 470000uF capacitance, and 20A rated current. With max insertion loss of 60dB, it's ideal for data line filtering applications. Operating temperature ranges from -55 to 125 °C.
Median Price
$28.510
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$16.890
1k+ parts
$13.430
10k+ parts
-
Nova Conductors
Vyrian
Corohmni
$1.655
Aztec Data Supply Inc.
$2.510
AZTECH Wire
$5.465
Advanced Electronics
$10.088
Continental Prestige Electronics
$13.161
Argo Parts USA
Authorized Procurement Solutions
Netroflash
$12.759
$12.490
This product is suitable for use in low voltage applications, providing the necessary filtration without risk of overloading.
Having 2 terminals allows for simple and easy installation, making it convenient for users.
The feed through capacitor design ensures effective filtering of unwanted noise and interference, resulting in a cleaner signal transmission.
With a high maximum operating temperature, this product is suitable for a wide range of environments and applications.
The ability to operate in temperatures as low as -55 °C ensures reliability even in harsh or extreme conditions.
The matte tin finish provides good conductivity and corrosion resistance, ensuring long-term reliability.
Compact size allows for easy integration into various electronic devices or systems.
High maximum insertion loss indicates effective noise suppression, leading to improved signal quality.
Low DC resistance ensures efficient power transmission and minimal energy loss.
The compact length of 5.7 mm enables easy placement even in space-constrained applications.
Bulk packing allows for cost-effective purchase of multiple units, ideal for bulk orders or production runs.
Surface mount design simplifies installation and integration into circuit boards, saving time and effort.
The compact dimensions make this product versatile and suitable for various electronic applications requiring space-saving components.
A high rated current of 20 A allows for use in applications that require significant power handling capabilities.
Low height profile of 3.18 mm enables easy integration into slim or compact devices.
High capacitance of 470000 uF ensures effective filtering and noise suppression, improving overall performance.
Data Line Filters SBSMC0500474MXB attributes and parameters. Explore more Data Line Filters devices from Knowles Precision Devices
Additional Features:
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
SBSMC0500474MXB Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Central Semiconductor
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
HI1206N101R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .035 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
SRF0905-100Y
Bourns
Bourns SRF0905-100Y is a Data Line Filter with 2 functions, rated voltage of 50V, and inductance of 10uH. It operates b/w -40°C to 105°C, has a max DC resistance of 0.08 ohm, and output impedance of 200 ohm. Ideal for surface mount applications requiring filtering in data lines with a current rating of 1.6A.
7427927110
Wuerth Elektronik & Kg
Wurth Elektronik 7427927110 is a chip bead data line filter with 2 terminals, rated current of 2.8A, and ferrite construction. It operates b/w -55 to 125°C, has a DC resistance of 0.05 ohm, and output impedance of 10 ohm. Ideal for surface mount applications in filtering frequencies from 100MHz to 1000MHz.
BLM18KG471SN1D
Murata Manufacturing
Murata Manufacturing's BLM18KG471SN1D is a chip bead data line filter with 470 OHM output impedance, suitable for surface mount applications. With dimensions of 1.6x0.8x0.8 mm and rated current of 1.5 A, it operates b/w -55 to 125 °C, making it ideal for noise suppression in electronic circuits up to 100 MHz frequency range.
HI1206T161R-10
Laird Technologies
HI1206T161R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. With dimensions of L3.2XB1.6XH1.1 (mm), it operates b/w -40 to 125 °C and has a max frequency of 1000 MHz. Ideal for applications requiring impedance of 160 OHM and rated current of 6 A in surface mount configurations.
BNX022-01
Murata Manufacturing's BNX022-01 is a 3-function data line filter with 500 Mohm insulation resistance and 50 V rated voltage. With max insertion loss of 35 dB, it operates b/w -40 to 125 °C and has a rated current of 10 A. Ideal for surface mount applications requiring effective noise filtering in data lines.
ACM4520V-142-2P-T00
TDK
ACM4520V-142-2P-T00 by TDK is a data line filter with 2 functions, rated voltage of 50V, and max operating temp of 125°C. Ideal for applications requiring high output impedance and insulation resistance in compact surface mount design.
4700-008LF
Tusonix
DATA LINE FILTER; Rated Current: 10 A; Maximum Operating Temperature: 85 Cel; Inductance: .1 uH; Capacitance: 4000 uF; Length: 8 mm;
BLM18AG601SN1B
Murata's BLM18AG601SN1B is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.38 ohm and operates b/w -55°C to 125°C. This ferrite chip filter has an output impedance of 600 ohm and is rated for a current of 0.5A, making it suitable for noise suppression in circuits up to 100MHz frequency range.
FBMJ2125HS420-T8
Taiyo Yuden
Taiyo Yuden's FBMJ2125HS420-T8 is a Ferrite Chip Data Line Filter with 2 terminals, 125°C max temp, -40°C min temp. It has 1.25mm width, 2mm length, and 0.008 ohm DC resistance. With an output impedance of 42Ω and rated current of 4A, it's ideal for surface mount applications in electronics to reduce electromagnetic interference.
NFE61HT332Z2A9L
Murata Manufacturing's NFE61HT332Z2A9L is a DATA LINE FILTER with 100V rated voltage, 3300uF capacitance, and 2A rated current. It is used in automotive applications due to AEC-Q200 screening level and operates b/w -55°C to 125°C temperature range.
ACM1513-551-2PL-TL
ACM1513-551-2PL-TL by TDK is a data line filter with 2 functions, rated voltage of 80V, and max operating temperature of 85°C. It offers min insulation resistance of 10 Mohm and output impedance of 550 ohm. Ideal for applications requiring noise filtering in electronic circuits.
B82787C0513H002
TDK B82787C0513H002 is a 2-function data line filter with 51uH inductance and 10 Mohm insulation resistance. Rated for 50V, it operates b/w -40 to 150°C, ideal for applications requiring noise suppression in data lines.
ACM7060-301-2PL-TL01
ACM7060-301-2PL-TL01 by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for surface mount applications requiring output impedance of 300 ohm.
TCK-050
Traco Electronic Ag
Traco Electronic Ag's TCK-050 is a Data Line Filter with 2 functions, inductance of 325uH, and max DC resistance of 0.035 ohm. It is used for noise suppression in data lines, measuring L11.0xB11.0xH8.8mm and rated for 3.3A current flow through THROUGH HOLE MOUNT installation.
74279223560
Wurth Elektronik 74279223560 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 10A current. It operates b/w -55 to 125°C, covering frequencies from 100 MHz to 1 GHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
7427927121
Wurth Elektronik 7427927121 is a FERRITE CHIP filter with 2 terminals, rated for 0.5A current. With dimensions of L1.0XB0.5XH0.5 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.8 ohm. Ideal for data line filtering applications due to its surface mounting type and output impedance of 220 OHM.
DLW21HN181SQ2L
Murata Manufacturing's DLW21HN181SQ2L is a data line filter with 2 functions, rated at 50V and 0.25A. It offers a max DC resistance of 0.5 ohm and an output impedance of 180 ohm, suitable for applications requiring noise suppression in data lines. With dimensions of L2.0xB1.2xH0.9 (mm), it is designed for surface mount installation in electronic devices operating b/w -40°C to 85°C.
BNX023-01L
Murata Manufacturing's BNX023-01L is a data line filter with 2 functions and 4 terminals. It offers 35 dB attenuation at 1000 MHz, rated for 100 V and 20 A. Ideal for applications requiring noise suppression in data lines, it operates b/w -40 to 125 °C.
742792625
Wurth Elektronik 742792625 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It has dimensions of L1.6xB0.8xH0.8 mm and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring output impedance of 120 ohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SBSMC5000683MXT
Knowles Precision Devices
FEED THROUGH CAPACITOR; Maximum DC Resistance: .005 ohm; Rated Current: 20 A; Rated Voltage: 500 V; No. of Functions: 1; Mounting Type: SURFACE MOUNT;
SBSMP1000334MXT
SBSMP1000334MXT by Knowles Precision Devices is a 100V data line filter with 0.5uH inductance, 60dB max insertion loss, and 10A rated current. Ideal for applications requiring noise suppression in electronic circuits. Dimensions: L5.7XB5.0XH3.18 (mm).
SBSMC0500474MXR
FEED THROUGH CAPACITOR; Maximum DC Resistance: .005 ohm; Rated Current: 20 A; JESD-609 Code: e3; Maximum Insertion Loss: 60 dB; No. of Functions: 1;
SBSMC0500474MXT
SBSMC0500474MXT by Knowles Precision Devices is a data line filter with a rated voltage of 50V and max insertion loss of 60dB. It is a surface mount component used for noise filtering in electronic circuits.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved