Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
5749069-7
TE Connectivity
TE Connectivity 5749069-7 is a Telecom & Datacom Connector with 68 contacts, 0.05" pitch, and EMI shielding. It has a temperature range of -55 to 105°C and insulation resistance of 1G ohm. Ideal for telecom applications requiring high reliability and signal currents up to 1A.
AMPLIMITE
.406 inch
.351 inch
2.515 inch
RECEPTACLE
TELECOM AND DATACOM CONNECTOR
NOT SPECIFIED
NOT APPLICABLE
FEMALE
RECTANGULAR
25 mohm
SQ PIN-SKT
NO
YES
1000000000 ohm
BLACK
POLYETHYLENE
1A
0.05
0.1
#2-56
LATCHING
STRAIGHT
BOARD
4
1
105
-55 Cel
GENERAL PURPOSE
STAGGERED
1.905
30u
1 A
UL
COMMERCIAL
TIN
CARBON STEEL
D Type Connectors
.125 inch
1.27
SOLDER
68
94V-0
1-1734509-4
TE Connectivity 1-1734509-4 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 rated. It has 8 contacts, insulation resistance of 200M ohm, and operates b/w -40 to 85°C. Ideal for board mounting in telecom applications due to its durability and polarization features.
LOW PROFILE
PEG
.445 inch
.638 inch
JACK
Tin (Sn) - with Nickel (Ni) barrier
50 mohm
TELCOM, MODULAR
750 Cycles
200000000 ohm
GLASS FILLED POLYAMIDE46
e3
LOCKING
RIGHT ANGLE
ONE
3
85
-40 Cel
MIXED
50u
POLARIZED HOUSING
BRASS
Telecom and Datacom Connectors
.087 inch
1.02
8
1734509-2
TE Connectivity 1734509-2 is a Telecom & Datacom Connector with EMI shielding. It has 8 contacts, glass-filled polyamide46 insulator, and solder termination. Ideal for telecom applications requiring high insulation resistance and durability up to 750 cycles.
15u
75134-1001
Molex
Molex 75134-1001 is a telecom & datacom connector with 59 contacts, 4 rows, and mating contact pitch of 0.05". It features insulation resistance of 500M ohm, operating temperatures from -20°C to 85°C, and UL94V-0 flammability rating. Ideal for board and panel mounting in commercial applications requiring reliable signal transmission up to 3A.
.514 inch
.44 inch
1.541 inch
20 mohm
500000000 ohm
GLASS FILLED LIQUID CRYSTAL POLYMER
M3
SCREWLOCKS
BOARD AND PANEL
-20 Cel
FLASH
3 A
CSA, UL
STEEL
.092 inch
59
74441-0007
Molex 74441-0007 is a Telecom & Datacom Connector with 0.031" mating contact pitch, suitable for board mounting with 0.8mm terminal pitch. Featuring 30 contacts, it has a max operating temperature of 85°C and UL flammability rating of 94V-0. Ideal for commercial applications requiring right-angle mounting and surface mount termination.
HIGH SPEED
.212 inch
.324 inch
.591 inch
PLUG
BELLOWED TYPE
.973
GLASS FILLED POLYETHYLENE
0.031
MULTIPLE MATING PARTS AVAILABLE
2
8.2042
.5 A
Headers and Edge Type Connectors
.8
SURFACE MOUNT
30
5556416-2
TE Connectivity's 5556416-2 is a Telecom & Datacom Connector with 0.625" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for telecom applications, it features a matte tin finish, PBT-POLYESTER insulator material, and gold mating contacts.
TOP ENTRY
SPLIT BOARD LOCK
.655 inch
.65 inch
.625 inch
GOLD (50)
Matte Tin (Sn) - with Nickel (Ni) barrier
30 mohm
1400VAC
PBT-POLYESTER
FLANGELESS
1.5 A
2.54
SS-640810-A-NF-A111
Bel Fuse
Bel Fuse SS-640810-A-NF-A111 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell material. Featuring 8 contacts in a polarized housing, it is ideal for board mounting applications requiring a right angle mount with staggered PCB contact pattern. This UL-certified connector offers reliable performance in commercial settings.
.505 inch
.7 inch
.605 inch
NICKEL/TIN
COPPER ALLOY
SS-6488-NF-K1
Bel Fuse SS-6488-NF-K1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and 2.54mm terminal pitch. It features a right angle mounting style for board applications with 8 contacts in a polarized housing. This UL-certified connector is ideal for commercial telecommunications and data communication systems.
POLARIZED
.815 inch
TIN/NICKEL
SS-6488S-A-NF-K1
Bel Fuse's SS-6488S-A-NF-K1 is a telecom and datacom connector with a body size of 0.635" x 0.55" x 0.85". It has 8 contacts, a polarization key, and a shell made of copper alloy. This right-angle jack connector is commonly used in commercial applications.
SHIELDED
.55 inch
.85 inch
.635 inch
15 mohm
SS-6488S-A-NF-50
Bel Fuse SS-6488S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and COPPER ALLOY shell. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring reliable right-angle board connections.
SS-7388H22-NF-50
Bel Fuse SS-7388H22-NF-50 is a 32-contact telecom connector with 1A signal current rating. Featuring 500M ohm insulation resistance, it has a dielectric voltage of 1000VAC and operates b/w -20 to 85°C. Ideal for board mounting in telecom and datacom applications, this UL-certified connector offers reliable performance with female contacts and solder termination.
4 PORT, 8-POSITION EACH
.99 inch
1.074 inch
1.19 inch
1000VAC
32
SS-801010SB-SP50-040-250
Bel Fuse's SS-801010SB-SP50-040-250 is a telecom and datacom connector with a body length of 0.75", width of 0.83", and depth of 1.3". It has a max operating temperature of 85°C, min operating temperature of -40°C, and plating thickness of 50u. This connector is commonly used in commercial applications for cable and panel mounting with wire termination.
PANEL MOUNTABLE
.83 inch
1.3 inch
.75 inch
POLYESTER
CABLE AND PANEL
WIRE
10
SS-641010S-A-NF-RMK4R
Bel Fuse SS-641010S-A-NF-RMK4R is a 10-contact telecom & datacom connector with 0.635"x.55"x.85" dimensions, POLYETHYLENE insulator, and NICKEL/TIN shell finish. It features 30u plating thickness, UL 94V-0 flammability code, and 1.5A signal current rating for board mounting applications requiring reliable right-angle female connectors with staggered PCB contact pattern.
SS-6466-NF-50
Bel Fuse SS-6466-NF-50 is a 6-contact telecom/datacom connector with gold finish, UL94V-0 rating, and 50u plating thickness. Ideal for board mounting in commercial applications, featuring staggered PCB contact pattern and right-angle mounting style. Terminal pitch of 2.54mm with female contacts suitable for solder termination.
.53 inch
GOLD
e4
6
SS-6488S-A-NF-1-01
Bel Fuse SS-6488S-A-NF-1-01 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell. It has 8 contacts in 2 rows, UL 94V-0 flammability code, and SOLDER termination. Ideal for board or panel mounting in telecom applications due to its right angle mounting style and FEMALE contact gender.
SS-651010-A-NF
Bel Fuse SS-651010-A-NF is a 10-contact telecom & datacom connector with 0.615"x.644"x.65" dimensions, POLYETHYLENE insulator, and 30u plating thickness. It features UL 94V-0 flammability rating, 1.5A signal current, and solder termination for commercial applications in telecommunications and data communication systems.
HOLE .125-.137
.644 inch
.615 inch
SS-7188S-A-NF-1-50
Bel Fuse SS-7188S-A-NF-1-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for board mounting at a pitch of 2.54mm. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
SS-7188S-A-NF-1
Bel Fuse SS-7188S-A-NF-1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY contacts. Ideal for board mounting with 2.54mm pitch, it features a right-angle jack style for commercial applications requiring reliable connectivity in telecommunications and data communication systems.
GOLD (30)
SS-6488-NF-RMK
Bel Fuse SS-6488-NF-RMK is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and 8 contacts. Ideal for board mounting with SPLIT BOARD LOCK option, it features a COPPER ALLOY shell material and RIGHT ANGLE mounting style. Designed for commercial reliability in telecommunications applications.
SS-650810S-A-NF-A125
Bel Fuse SS-650810S-A-NF-A125 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell material. It features 8 FEMALE contacts in a JACK body style for BOARD AND PANEL mounting. This UL-certified connector has a 0.67" x 0.67" x 0.75" size and is ideal for commercial applications requiring reliable telecommunications connections.
.67 inch
.18 inch
SS-650810S-A-NF-K1-50
Bel Fuse SS-650810S-A-NF-K1-50 is a Telecom & Datacom Connector with 8 contacts, gold plating (50u), and polyethylene insulator. It has a split board lock mounting option, staggered PCB contact pattern, and solder termination type. Ideal for commercial applications requiring reliable female connectors with polarized housing and UL flammability rating of 94V-0.
.68 inch
SS-668802S-A-NF
Bel Fuse SS-668802S-A-NF is a Telecom & Datacom Connector with 16 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC, insulation resistance of 500MΩ, and operates b/w -20 to 85°C. Ideal for board mounting in telecom applications due to its right-angle mounting style and staggered PCB contact pattern.
2 PORTS, 8-POSITION EACH
.865 inch
1.254 inch
NICKEL
16
SS-7188S-A-NF-50
Bel Fuse SS-7188S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring right angle mounting with solder termination.
SS-7188S-A-NF-K1
Bel Fuse SS-7188S-A-NF-K1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell material. Featuring 8 contacts in a polarized housing, it is ideal for board mounting with staggered PCB contact pattern at 2.54mm pitch for right-angle mounting applications.
937-SP-301010R-031
Bel Fuse's 937-SP-301010R-031 is a Telecom & Datacom Connector with POLYCARBONATE insulator, UL 94V-0 flammability rating, and 10 contacts. It operates b/w -40 to 85°C, has a plating thickness of 50u, and offers durability up to 750 cycles. Ideal for wire/stranded cable termination in commercial applications.
.312 inch
.885 inch
.46 inch
WIRE, STRANDED
MALE
BLUE
POLYCARBONATE
CABLE
IDC
937-SP-301010R-K1
Bel Fuse's 937-SP-301010R-K1 is a Telecom & Datacom Connector with dimensions of 0.46" x 0.331" x 0.885". It has 10 contacts, UL94V-0 rated clear polycarbonate insulator, and operates b/w -40°C to 85°C. Ideal for commercial telecom applications with IDC termination on cables.
POLARIZATION AVAILABLE
.331 inch
CLEAR
937-SP-301010R-K2
Bel Fuse's 937-SP-301010R-K2 is a telecom & datacom connector with dimensions of 0.46" x 0.312" x 0.845". It features 10 contacts, IDC termination, and clear polycarbonate insulator. Ideal for wire/stranded cable connections in commercial applications.
.845 inch
937-SP-3088R-K1-031
Bel Fuse's 937-SP-3088R-K1-031 is a Telecom & Datacom Connector with dimensions of 0.46" x 0.286" x 0.885". It has 8 contacts, POLYCARBONATE insulator, and operates b/w -40°C to 85°C. Ideal for wire/stranded cable termination in telecom applications due to its durability of 750 cycles.
.286 inch
940-SP-3088R-A286
Bel Fuse's 940-SP-3088R-A286 is a telecom and datacom connector with dimensions of 0.46" x 0.312" x 0.845". It has a clear polycarbonate insulator, 1 row loaded, and 8 contacts. This plug-style connector is suitable for wire or stranded cable termination in commercial applications.
937-SP-3088-2PC-A192
Bel Fuse's 937-SP-3088-2PC-A192 is a Telecom & Datacom Connector with dimensions of 0.46" x 0.457" x 0.885". It has 8 contacts, polycarbonate insulator, and operates b/w -40°C to 85°C. Ideal for wire/stranded cable termination in telecom applications due to its durability and UL certification.
ROHS COMPLIANT, BULK PKG
.457 inch
1-5750913-9
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .293 inch;
.293 inch
.261 inch
2.829 inch
ROUND
PREASSEM CONN
Nickel/Gold (Ni/Au)
500 Cycles
GRAY
TIN-NICKEL
Other Rectangular Connectors
100
28 AWG
30 AWG
5749111-6
TE Connectivity 5749111-6 is a telecom & datacom connector with 68 contacts, 0.05" pitch, and EMI shielding. It has a body length of 2.029", insulation resistance of 1G ohm, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring durable male connectors with IDC termination on round cables.
2.029 inch
800 Cycles
5749621-4
TE Connectivity's 5749621-4 is a telecom & datacom connector with 40 contacts, 0.05" mating contact pitch, and 1A signal current rating. It features EMI shielding, polyethylene insulation, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable connectivity in telecommunications and data communication systems.
1.329 inch
.029 inch
40
5749621-8
TE Connectivity 5749621-8 is a Telecom & Datacom Connector with 80 contacts, 0.05" pitch, and EMI shielding. Ideal for telecom applications, it has a temperature range of -55 to 105°C and insulation resistance of 1G ohm.
2.329 inch
80
5749621-9
TE Connectivity 5749621-9 is a telecom & datacom connector with 100 contacts, 0.05" pitch, and EMI shielding. Ideal for commercial applications, it has a temperature range of -55 to 105°C and insulation resistance of 1 Gohm. The connector features male contact gender, steel shell material, and IDC termination type.
5749699-7
TE Connectivity 5749699-7 is a telecom & datacom connector with 68 contacts, 0.05" pitch, and EMI shielding. Ideal for commercial applications, it has a temperature range of -55 to 105°C and offers high durability with 800 cycles.
.592 inch
5750913-5
TE Connectivity 5750913-5 is a Telecom & Datacom Connector with 50 contacts, 0.05" pitch, and EMI shielding. Ideal for telecom applications, it has a durable steel shell, polyester insulator, and operates b/w -55°C to 105°C.
1.579 inch
50
5750913-7
TE Connectivity 5750913-7 is a Telecom & Datacom Connector with 68 contacts, rated at 1A. It features EMI shielding, polyester insulation, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring durable male connectors with IDC termination on round cable mounting.
J0011D01B
Pulse Electronics
J0011D01B by Pulse Electronics is a Telecom & Datacom Connector with 0.64" body length, 0.545" body width, and 0.85" body depth. It features POLYETHYLENE insulator material, 15u plating thickness, and operates b/w 0-70°C. Ideal for board and panel mounting in telecom and datacom applications due to its durability of 750 cycles.
PULSEJACK, SHIELDED
.545 inch
.64 inch
AU ON NI
PHOSPHOR BRONZE
70
0 Cel
1888250-1
TE Connectivity 1888250-1 is a Telecom & Datacom Connector with EMI shielding, POLYETHYLENE insulator, and 500M ohm insulation resistance. It features a 0.641" body length, 0.456" width, and 0.165" depth. Ideal for telecom applications requiring durable connectors with high insulation resistance.
.456 inch
.165 inch
.641 inch
115/230VAC
MOUNTING FLANGE
.6 A
.091 inch
PRESS FIT
1888250-2
TE Connectivity 1888250-2 is a Telecom & Datacom Connector with EMI Shielding, Insulation Resistance of 500MΩ, and rated for 0.6A signal current. It features POLYETHYLENE insulator, COPPER ALLOY shell material, and PRESS FIT termination. Ideal for telecom applications requiring durability up to 750 cycles.
1-5520250-1
TE Connectivity 1-5520250-1 is a Telecom & Datacom Connector with 0.625" body length, 500M ohm insulation resistance, and 1400VAC dielectric voltage. Ideal for telecom applications, it features a female contact gender, right angle mounting style, and solder termination type.
.825 inch
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
.085 inch
760445001
The Molex 760445001 is a telecom and datacom connector with glass-filled plastic insulator material. It has a max operating temperature of 100°C and a min operating temperature of -40°C. With 2 ports and a total of 40 contacts, it is suitable for board mounting in commercial applications.
2 PORTS, 20-POSITION EACH
100 Cycles
GLASS FILLED PLASTIC
0759510999
.081 inch
.7874
USB-A-S-S-B-SM2
Samtec
USB-A-S-S-B-SM2 by Samtec is a USB connector with 4 contacts, gold mating finish, and matte tin termination. It is used in telecom & datacom applications for board mounting with a right-angle shell style. Operating temperature ranges from -50 to 85°C, offering durability of 1500 cycles.
.272 inch
.646 inch
USB CONNECTOR
MATTE TIN OVER NICKEL
USB, SER A FLAT
1500 Cycles
POLYAMIDE
-50 Cel
POLAR PIN POSITION
2.0066
USB-A-S-S-W-SM2
USB-A-S-S-W-SM2 by Samtec is a USB connector with POLYAMIDE insulator, MATTE TIN finish, and COPPER ALLOY shell. It has 4 contacts, operates b/w -50 to 85°C, and offers 1500 cycles durability. Ideal for telecom/datacom applications requiring a reliable surface mount right-angle connection.
MATTE TIN
TM11AP1-88P(03)
Hirose Electric
TM11AP1-88P(03) by Hirose Electric is a Telecom & Datacom Connector with 8 contacts, made of brass and polycarbonate. It has an insulation resistance of 100M ohm, dielectric voltage of 700VAC, and operates b/w -25 to 60°C. Ideal for telecom applications requiring durable connectors with TIN finish and IDC termination.
.461 inch
1.189 inch
.508 inch
230 mohm
700VAC
200 Cycles
100000000 ohm
60
-25 Cel
POLARIZED KEY
26 AWG
5-216792-0
TE Connectivity 5-216792-0 is a Telecom & Datacom Connector with 50 contacts, rated at 1A. It features a mating contact pitch of 0.1", insulation resistance of 5Gohm, and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable signal connections on PCBs with board mounting options.
SOLDERED DIRECTLY TO THE BOARD
BOARD LOCK
.264 inch
2.7 inch
Tin (Sn)
DUAL PRONG
5000000000 ohm
-65 Cel
98u
.114 inch
5555149-1
TE Connectivity 5555149-1 is a telecom & datacom connector with EMI shielding, 50 contacts, and 3.5A signal rating. It has a mating contact pitch of 0.085", body length of 3.31", and operates b/w -40°C to 105°C. Ideal for board mounting in commercial applications requiring reliable female connectors with right-angle mounting style.
.5 inch
.633 inch
3.31 inch
GLASS FILLED POLYESTER
3.5A
0.085
0.169
14702
BAIL MOUNT
3.5 A
ZINC ALLOY
2.16
© 2023 All rights reserved
