Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
J0011D01B by Pulse Electronics is a Telecom & Datacom Connector with 0.64" body length, 0.545" body width, and 0.85" body depth. It features POLYETHYLENE insulator material, 15u plating thickness, and operates b/w 0-70°C. Ideal for board and panel mounting in telecom and datacom applications due to its durability of 750 cycles.
Median Price
$4.538
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Vyrian
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Chip Stock
Nova Conductors
Component Sense
LIBRA Elektronik GmbH
Prism Electronics
Advanced Electronics
$1.193
$1.086
$0.978
AZTECH Wire
$1.440
$1.380
$1.360
$1.330
Aranea Global
Perfect Parts
Compact size allows for high-density PCB layouts, saving space in telecom and datacom applications.
Helps to reduce electromagnetic interference, ensuring signal integrity in high-speed data transmission.
Provides good electrical insulation properties and resistance to heat, making it suitable for telecom and datacom environments.
Can withstand elevated temperatures common in telecom and datacom equipment without degrading performance.
Ensures reliable electrical connections and corrosion resistance, improving the longevity of the connector.
Meets stringent safety standards for flammability, enhancing the overall safety of the product.
Offers ample connectivity options for data and signal transmission, suitable for various telecom and datacom applications.
Designed to withstand repeated mating cycles, ensuring long-lasting performance and reliability in demanding environments.
Telecom & Datacom Connectors J0011D01B attributes and parameters. Explore more Telecom & Datacom Connectors devices from Pulse Electronics
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
J0011D01B Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Obsolescence/ EOL - Multiple Devices 14/May/2012 Multiple Devices 30/Jun/2017
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Bytesonic Electronics
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
47491-0001
Molex
Molex 47491-0001 USB connector features gold termination, LCP insulator, and 1A signal current. Ideal for telecom/datacom applications with 5 contacts, right-angle mounting, and 10000 cycle durability. Operating temp range -40 to 85°C makes it suitable for commercial use.
1734517-1
TE Connectivity
TE Connectivity's 1734517-1 is a POLYETHYLENE Telecom & Datacom Connector with 4 contacts, rated at 1A. It operates b/w 0-50°C, has a plating thickness of 29.92u, and is UL94V-0 compliant. Ideal for board mounting in telecom and datacom applications due to its durability of 1500 cycles.
2171840001
TELECOM AND DATACOM CONNECTOR;
74320-4000
The Molex 74320-4000 is a telecom and datacom connector with a body length of 0.145", body width of 0.39", and body depth of 0.454". It is used for board and panel mounting in commercial applications, with a rated current of 3A and an operating temperature range from -20°C to 85°C.
615006138421
Wuerth Elektronik & Kg
615006138421 by Wurth Elektronik is a Telecom & Datacom Connector with 6 contacts, rated at 1.5A signal current. It features gold over nickel termination finish, polybutylene terephthalate insulator material, and staggered PCB contact pattern. Ideal for telecom and datacom applications with a durability of 500 cycles and operating temperatures ranging from -25 to 85°C.
USB-B-S-F-W-TH-FR
Samtec
Samtec USB-B-S-F-W-TH-FR is a USB 2.0 B connector with POLYBUTYLENE TEREPHTHALATE insulator, NICKEL shell finish, and STEEL shell material. It has 4 contacts, operates b/w -50 to 85°C, and offers durability of 1500 cycles. Ideal for telecom & datacom applications requiring right angle mounting on boards with retention clips.
CI94PFIA1A0
Cvilux
Cvilux CI94PFIA1A0 is a Telecom & Datacom Connector with 15 contacts, rated at 7A signal current. It features IDC termination, GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, and FLASH plating. Ideal for applications requiring polarized housing, UL certification, and operating temperatures from -40 to 105°C.
67643-3910
Molex 67643-3910 USB connector features 4 contacts, with 0.567" body length and 0.274" width. Insulation resistance of 1e9 ohm and dielectric voltage of 750VAC. Ideal for telecom/datacom applications, UL-rated with solderable retention clips for board mounting at -40 to 85°C.
57-30500
Amphenol
Amphenol 57-30500 is a Telecom & Datacom Connector with 50 contacts, 0.085" pitch, and 2 rows. It has a dielectric voltage of 700VDC, gold termination finish, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable signal transmission in telecom and datacom systems.
2301994-6
TE Connectivity's 2301994-6 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style for board lock option. Ideal for applications requiring high operating temperatures and UL flammability code compliance.
GSB3211311WEU
GSB3211311WEU by Amphenol is a USB connector with 9 contacts, featuring matte tin termination finish. It has a body length of 0.472", width of 0.507", and depth of 0.722". Ideal for telecom/datacom applications, it offers high insulation resistance (100M ohm) and operates b/w -55°C to 85°C.
USB4056-03-A-0140
Global Connector Technology
USB4056-03-A-0140 by Global Connector Technology is a USB connector with 24 contacts, rated at 6.25A signal current. It features liquid crystal polymer insulation, nickel shell finish, and stainless steel shell material. Ideal for telecom & datacom applications, it has a dielectric voltage of 100VAC and operates b/w -25 to 85°C temperatures.
215877-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: TIN OVER NICKEL; Contact Style: TELCOM, MODULAR; IEC Conformity: NO;
MP1010RX-5000S
Kycon
The Kycon MP1010RX-5000S is a telecom & datacom connector with 1010 contacts. It features gold flash termination, copper alloy contact material, and polycarbonate insulator. Ideal for commercial applications, it has an insulation resistance of 500M ohm, dielectric voltage of 1400VAC, and operates b/w -55 to 85°C.
5353928-2
TE Connectivity's 5353928-2 is a POLYETHYLENE insulator TELECOM AND DATACOM CONNECTOR with LOCATING POST board mounting. It has a max operating temp of 85°C and -55°C min. Ideal for telecom and datacom applications, featuring COPPER ALLOY shell material, TIN finish, and UL 94V-0 flammability rating.
67643-2910
Molex 67643-2910 USB connector features 4 contacts, with insulation resistance of 1Gohm and dielectric voltage of 750VAC. Ideal for telecom/datacom applications, it has a solderable board mounting option and operates b/w -40 to 85°C.
2171790001
Molex 2171790001 USB connector features 16 contacts, POLYAMIDE insulator, and NICKEL finish. With a rated current of 1.25A, it is ideal for telecom & datacom applications. Operating temperature range from -40 to 85°C makes it suitable for various environments.
5569284-1
TE Connectivity 5569284-1 is a Telecom & Datacom Connector with 0.615" body length, 0.65" width, and POLYAMIDE insulator. It has 500M ohm insulation resistance, Tin (Sn) termination finish, and operates b/w -40 to 85°C. Ideal for telecom applications due to its UL-rated design, polarized housing, and FEMALE contact gender.
47346-0001
The Molex 47346-0001 is a USB connector with a body length of 0.307", body width of 0.116", and termination contact finish of GOLD. It is commonly used in telecom and datacom applications, offering a durable design with 10,000 cycles and a right-angle mounting style.
1734366-1
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Minimum Operating Temperature: -40 Cel; No. of Rows Loaded: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
J0011D01BNL
Pulse Electronics
J0011D01BNL by Pulse Electronics is a Telecom & Datacom Connector with 0.64" body length, 0.545" width, and 0.85" depth. It features 8 contacts, POLYETHYLENE insulator, and NICKEL shell finish. Ideal for board and panel mounting in telecom and datacom applications.
J0011D21BNL
J0011D21BNL by Pulse Electronics is a Telecom & Datacom Connector with dimensions of 0.64" x 0.545" x 0.85". Featuring Matte Tin finish, it has 8 contacts and is used in board and panel mounting applications for telecom and datacom systems.
J0011D21
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYETHYLENE; Total No. of Contacts: 8; Empty Shell: NO;
J0011D21E
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: .545 inch; PCB Contact Pattern: STAGGERED; Body or Shell Style: JACK;
J0011D01NL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): 15u; Durability: 750 Cycles;
J0011D21ENL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: NICKEL; Mounting Style: RIGHT ANGLE; JESD-609 Code: e3;
J0011D21NL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Body Depth: .85 inch; PCB Contact Row Spacing (mm): 2.54;
J0012D21NL
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Shell Material: BRASS; Empty Shell: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved