Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other function RF connectors are a type of connector used in specialized radio frequency (RF) applications, where specific features are required for specialized functionality. They are designed to provide a reliable and stable connection between coaxial cables and RF equipment, while also maintaining low signal loss and high frequency performance.Other function RF connectors are available in a range of sizes and configurations, with different connector types and genders. They may include features such as sealing, grounding, or EMI shielding to ensure reliable performance in demanding applications.One advantage of other function RF connectors is their ability to provide specialized functionality, depending on the specific requirements of the application. For example, connectors may include specific impedance values, or may be designed for use in high-vibration or high-temperature environments.Other function RF connectors are commonly used in a variety of industrial applications, including telecommunications, wireless communication systems, and aerospace and defense applications. They may be used to connect antennas, receivers, transmitters, and other RF equipment, and may be subject to rigorous testing and qualification requirements to ensure their reliability and performance.
Add filters
All
Selected
SMP-FR-C07
Amphenol
The Amphenol SMP-FR-C07 is an RF SMP connector with a body diameter of 0.187" and depth of 0.27". Featuring a max operating frequency of 26.5 GHz, it has a VSWR of 1.35 and operates b/w -65°C to 165°C. Ideal for applications requiring a right-angle mounting style, this female socket connector has a characteristic impedance of 50 ohms.
.27 inch
.187 inch
SOCKET
50 ohm
RF SMP CONNECTOR
FEMALE
SNAP
RIGHT ANGLE
CABLE
26.5 GHz
165
-65 Cel
GENERAL PURPOSE
NO
1
1.35
SMP-FS-C07
Amphenol SMP-FS-C07 is a 50 ohm RF connector with GOLD OVER NICKEL finish. Featuring SNAP coupling, it operates up to 26.5 GHz with VSWR of 1.35. Ideal for cable mounting applications requiring FEMALE contact gender and POLYTETRAFLUOROETHYLENE insulator material.
VSWR IS MAX AT 20GHZ
RF CONNECTOR
NOT SPECIFIED
GOLD OVER NICKEL
POLYTETRAFLUOROETHYLENE
e4
STRAIGHT
1056522-1
TE Connectivity
The TE Connectivity 1056522-1 RF SMP Connector features a body diameter of 0.135", insulation resistance of 5G ohm, and max operating frequency of 40 GHz. It is used in applications requiring a female contact gender, straight mounting style, and characteristic impedance of 50 ohm for commercial reliability at temperatures ranging from -65 to 165°C.
.25 inch
.135 inch
JACK
RG 405 SEMI-RIGID
6 mohm
COAX
YES
5000000000 ohm
115/230VAC
LOCKING
ONE
40 GHz
COMMERCIAL
GOLD
BERYLLIUM COPPER
Other RF Connectors
SOLDER
R285025401W
Radiall S A
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO;
MALE
BAYONET
R223425000W
R223425000W by Radiall S A is an RF MMBX connector with SNAP coupling type, suitable for board mounting. Featuring a body depth of 0.256", it has a solder termination and female contact gender. Ideal for applications requiring a straight receptacle design in RF connectivity.
CAPTIVE CENTER CONTACT
.256 inch
RECEPTACLE
RF MMBX CONNECTOR
NOT APPLICABLE
BOARD
R223425000
R223425000 RF Connector by Radiall S A features a low insertion loss of 0.42 dB and a VSWR of 1.07, suitable for applications up to 12.4 GHz. With a body size of 0.24" x 0.24" x 0.256", it is designed for panel mount installations in various electronic systems requiring reliable signal transmission at temperatures ranging from -55°C to 155°C.
.24 inch
.42 dB
LIQUID CRYSTAL POLYMER
BOARD AND PANEL
12.4 GHz
155
-55 Cel
BRASS
1.07
R223435000W
R223435000W by Radiall S A is an RF MMBX connector with a body depth of 0.35". Featuring SNAP coupling, it has a solder termination and male contact gender. Ideal for board mounting applications, this receptacle connector offers reliable performance in straight mounting style setups.
.35 inch
R223435000
R223435000 RF connector by Radiall S A features a low insertion loss of 0.42 dB and a VSWR of 1.08, suitable for applications up to 12.4 GHz. With a snap coupling type and solder termination, this male connector with 50 ohm impedance is ideal for board mounting in high-frequency RF systems.
.22 inch
1.08
SMP-MSLD-PCS
The Amphenol SMP-MSLD-PCS RF connector features a 50 ohm characteristic impedance, gold termination finish, and 18 GHz max operating frequency. Ideal for commercial applications, it offers a durability of 500 cycles with a voltage standing wave ratio of 1.3. Suitable for surface mount board mounting, this connector has a temperature range from -65 to 165 °C.
.197 inch
.161 inch
.165 inch
Gold (Au)
500VAC
500 Cycles
8.896
18 GHz
SURFACE MOUNT
1.3
2.1962
908-NM43200
Amphenol's 908-NM43200 RF connector features a dielectric voltage of 700VAC, gold contact finish, and a max operating frequency of 6 GHz. Ideal for commercial applications requiring a durable, 50 ohm coaxial plug with right-angle mounting and crimp termination on RD-178 cable types.
APPLICABLE CABLE: RG 178
.276 inch
PLUG
RD-178
700VAC
6 GHz
BRONZE
CRIMP
5-1814822-1
TE Connectivity 5-1814822-1 is a RF F CONNECTOR with 75 ohm impedance, 700VAC dielectric voltage, and 50 cycles durability. Ideal for commercial applications at temperatures ranging from -55 to 85 °C, it features a 0.374" body diameter and NICKEL finish.
.827 inch
.374 inch
75 ohm
RF F CONNECTOR
100 mohm
50 Cycles
1814822
2 GHz
85
NICKEL
5-1814822-3
TE Connectivity 5-1814822-3 RF Connector has a body diameter of 0.413" and operates at temperatures from -55 to 85°C. With characteristic impedance of 75 ohm, it is suitable for RG 6 cables and supports up to 1 GHz frequency. Ideal for panel mounting applications requiring a male plug connector with nickel finish brass shell.
.413 inch
RG 6
SCREW
PANEL
1 GHz
5-1634540-1
TE Connectivity 5-1634540-1 RF Connector features threaded coupling, TPX insulator, and 75 ohm impedance. Ideal for board mounting in applications requiring a right angle jack connector with a max operating frequency of 2 GHz.
.515 inch
THREADED
TPX
ZINC ALLOY
.114 inch
81_MMBX-S50-0-1/111_NE
Huber+suhner Ag
81_MMBX-S50-0-1/111_NE by Huber+suhner Ag is a RF MMBX CONNECTOR with SNAP coupling, LCP/PFA insulator, and 50 ohm impedance. It operates up to 12.4 GHz at -55 to 155 °C, suitable for BOARD mounting in commercial applications requiring durable connectors with low VSWR.
VSWR MAX AT 6 GHZ
.241 inch
.226 inch
100 Cycles
LCP/PFA
1.15
81_MMBX-S50-0-1/111_NH
81_MMBX-S50-0-1/111_NH by Huber+suhner Ag is a RF MMBX CONNECTOR with characteristic impedance of 50 ohm, operating up to 12.4 GHz. It features SNAP coupling, LCP/PFA insulator, and brass shell material. Ideal for board mounting in commercial applications due to its durability of 100 cycles and temperature range from -55 to 155 °C.
82_MMBX-50-0-14/111_NE
82_MMBX-50-0-14/111_NE by Huber+suhner Ag is a RF connector with a body length of 0.232 inch, body diameter of 0.327 inch, and max operating frequency of 12.4 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.5.
.232 inch
.327 inch
1.5
82_MMBX-50-0-14/111_NH
82_MMBX-50-0-14/111_NH by Huber+suhner Ag is a RF connector with a body length of 0.232 inch, body diameter of 0.327 inch, and max operating frequency of 12.4 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.5.
82_MMBX-50-0-2/111_NE
82_MMBX-50-0-2/111_NE RF connector by Huber+suhner Ag features a gold (Au) termination finish, liquid crystal polymer insulator, and 1.15 VSWR. With a max operating frequency of 12.4 GHz, it is ideal for board mounting applications requiring a durable female jack connector with 50 ohm impedance.
.122 inch
Gold (Au) - with Nickel (Ni) barrier
.134 inch
82_MMBX-S50-0-13/111_NE
82_MMBX-S50-0-13/111_NE RF connector by Huber+suhner Ag features a SNAP coupling type, 50 ohm impedance, and operates up to 12.4 GHz. Ideal for board mounting applications, this female jack connector has a VSWR of 1.5 and can withstand temperatures from -55 to 155°C.
LCP/PTFE/PFA
82_MMBX-S50-0-13/111_NM
82_MMBX-S50-0-13/111_NM RF connector by Huber+suhner Ag features a body length of 0.232", gold termination finish, and a max operating frequency of 12.4 GHz. It is designed for applications requiring a 50 ohm characteristic impedance, such as high-frequency communication systems or test equipment setups.
82_MMBX-S50-0-3/111_NE
82_MMBX-S50-0-3/111_NE RF connector by Huber+suhner Ag features a characteristic impedance of 50 ohm, max operating frequency of 12.4 GHz, and VSWR of 1.5. Ideal for board mounting applications, this female jack connector with snap coupling is designed for high-frequency signal transmission in electronic systems.
.136 inch
92_MMBX-S50-0-12/111_NE
92_MMBX-S50-0-12/111_NE by Huber+suhner Ag is a SNAP coupling type RF connector with a body width of 0.275 inch and depth of 0.253 inch. It has a max operating frequency of 12.4 GHz and is commonly used in board mounting applications.
.275 inch
.253 inch
92_MMBX-S50-0-12/111_NM
92_MMBX-S50-0-12/111_NM RF connector by Huber+suhner Ag features a body width of 0.275" and depth of 0.253", with a max operating frequency of 12.4 GHz. It is designed for board mounting, has a characteristic impedance of 50 ohm, and operates in temperatures ranging from -55 to 155 °C. Ideal for applications requiring high-frequency signal transmission.
1056551-1
TE Connectivity 1056551-1 RF Connector features 50 ohm impedance, 0.12 dB insertion loss, and 26.5 GHz max frequency. Ideal for commercial applications, it has a durable beryllium copper shell with gold finish and PTFE insulator for high reliability in temperatures ranging from -65 to 165 °C.
.265 inch
.12 dB
1056721-1
TE Connectivity's 1056721-1 RF Connector features a 50 ohm impedance, stainless steel shell, and operating temperatures ranging from -65 to 165°C. Ideal for applications requiring a single port RF connection with straight mounting style.
POLYTETRAFLUORO ETHYLENE/POLYETHYLENE
STAINLESS STEEL
1056724-1
TE Connectivity's 1056724-1 RF Connector features a 50 ohm impedance, stainless steel shell, and operating temperatures ranging from -65 to 165°C. Ideal for applications requiring high-frequency signal transmission in harsh environments.
1056729-1
1056729-1 by TE Connectivity is a RF CONNECTOR with 50 ohm impedance, made of STAINLESS STEEL. Operating temperature range: -65 to 165 °C. Used in applications requiring high-quality RF connections at extreme temperatures.
1056731-1
TE Connectivity's 1056731-1 RF Connector features a 50 ohm impedance, stainless steel shell, and -65 to 165°C operating temperature range. Ideal for applications requiring reliable RF connections in various industries.
1056736-1
TE Connectivity's 1056736-1 RF Connector features a 50 ohm impedance, stainless steel shell, and -65 to 165 °C operating temperature range. Ideal for applications requiring press fit termination in straight mounting style with mains connector rating of 115/230VAC.
PRESS FIT
1056744-1
TE Connectivity's 1056744-1 RF Connector features threaded coupling, PTFE/PE insulator, and stainless steel shell. With a 50 ohm impedance, it operates b/w -65 to 165°C. Ideal for applications requiring male contact gender and straight mounting style at 115/230VAC mains rating.
6-1393696-7
TE Connectivity's 6-1393696-7 RF CONNECTOR features SNAP coupling, 75 ohm impedance, and operates up to 2 GHz. Ideal for board mounting in applications requiring surface mount termination, this FEMALE connector with RIGHT ANGLE mounting is commonly used in RF systems.
03S12L-000S3
Rosenberger Hochfrequenztechnik & Kg
Rosenberger Hochfrequenztechnik & Kg's 03S12L-000S3 RF Connector features threaded coupling, polystyrol insulator, and male contact gender. With a VSWR of 2.62, it operates up to 26.5 GHz, making it ideal for high-frequency applications in telecommunications and aerospace industries.
POLYSTYROL
2.62
82_MBX-50-0-3/111_NE
82_MBX-50-0-3/111_NE RF connector by Huber+suhner Ag features a body length of 0.236", insulator made of LCP, and operates at temperatures from -55 to 155 °C. It is ideal for applications requiring a durable, 50 ohm impedance RF connection with a max frequency of 6 GHz.
.236 inch
.203 inch
.132 inch
930-118P-51A
Amphenol 930-118P-51A RF QMA Connector has a characteristic impedance of 50 ohm, operates up to 6 GHz frequency, and features gold termination finish. Ideal for cable mounting applications requiring snap coupling with right-angle plug style.
APPLICABLE CABLE: RG 316
RF QMA CONNECTOR
CRIMP SOLDER
1.33
272110
Amphenol 272110 RF connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring male plug connectors with silver finish over copper, suitable for cables with operating temperatures ranging from -65 to 165°C and frequencies up to 75 GHz.
RF 7/16 DIN CONNECTOR
SILVER (200) OVER COPPER
Silver (200) Over Copper
75 GHz
WIRE
2406846-1
TE Connectivity's 2406846-1 RF SMP Connector features SNAP coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring a max operating frequency of 40 GHz, such as cable mounting in high-frequency communication systems.
.086 SEMI-RIGID, FLEXIBLE
125
-40 Cel
2406855-1
TE Connectivity's 2406855-1 RF SMP Connector features SNAP coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring a straight jack with 0.086 semi-rigid or flexible cable termination up to 18 GHz frequency range.
2406869-1
TE Connectivity's 2406869-1 RF SMP Connector features SNAP coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring a right angle mounted jack with 0.086 semi-rigid or flexible cable types, operating up to 15 GHz.
15 GHz
2406845-1
TE Connectivity's 2406845-1 RF SMPM Connector features SNAP coupling, POLYETHERETHERKETONE insulator, and BERYLLIUM COPPER shell. With a max operating frequency of 40 GHz, it is ideal for applications requiring high-frequency signal transmission in telecommunications and aerospace industries.
RF SMPM CONNECTOR
POLYETHERETHERKETONE
IJ5C-08-0100-S-S-1
Samtec
Samtec's IJ5C-08-0100-S-S-1 RF Connector features 8 contacts, 50 ohm impedance, and operates up to 9.5 GHz. With a SNAP coupling type and liquid crystal polymer insulator, it is ideal for high-frequency applications requiring reliable cable termination in straight mounting style.
.336 inch
.991 inch
1.92 inch
9.5 GHz
90
WITH CABLE ASSEMBLY
UL
COPPER ALLOY
8
FSNS59U-25
Belden
Belden FSNS59U-25 RF F CONNECTOR has Insertion Loss of -0.2 dB, VSWR of -1.07, and 75 ohm Impedance. It operates b/w -40 to 60 °C and supports up to 1 GHz frequency. Ideal for cable applications requiring threaded coupling in CE standard environments.
APPLICABLE CABLE: RG-59
-.2 dB
60
CE
-1.07
CX020L2HN
TE Connectivity's CX020L2HN RF Connector features a screw coupling type, PTFE insulator material, and 50 ohm characteristic impedance. Ideal for applications requiring a max operating frequency of 60 GHz, such as board-mounted RF connections in electronic devices.
RG 178
THREADED HOLE
60 GHz
1 A
ALUMINUM ALLOY
2.54
2
531-40193-HF
Amphenol 531-40193-HF RF F connector has a threaded coupling type, 75 ohm impedance, and operates up to 3 GHz. It is used in commercial applications for board mounting with a durability of 500 cycles.
1.595 inch
TIN OVER NICKEL
e3
3 GHz
TIN
.115 inch
PSMP-MSLD-PCSEM
PSMP-MSLD-PCSEM by Amphenol is a RF SMP CONNECTOR with a characteristic impedance of 50 ohm. It has an insertion loss of 0.09 dB and can withstand a max operating frequency of 10 GHz. This connector is commonly used in commercial applications requiring high insulation resistance and surface mount termination.
.217 inch
1400VAC
.09 dB
10 GHz
1.11
PSMP-MSLD-PCS
PSMP-MSLD-PCS by Amphenol is a RF SMP CONNECTOR with 50 ohm impedance, 0.095 dB insertion loss, and 10 GHz max operating frequency. It is used in board mounting applications for high-frequency signal transmission due to its SNAP coupling type and POLYETHERETHERKETONE insulator material.
VSWR MAX AT: 6 GHZ
.315 inch
.095 dB
1.106
PSMP-MSSB-PCS
Amphenol's PSMP-MSSB-PCS RF SMP connector has a body diameter of 0.354" and insertion loss of 0.095 dB. With a max operating frequency of 10 GHz, it is ideal for high-frequency applications. The connector features a snap coupling type and surface mount termination, making it suitable for board mounting in various electronic devices.
.246 inch
.354 inch
73254-0111
Molex
RF QMA CONNECTOR;
73415-3032
Molex 73415-3032 RF SMP Connector features 0.1 dB insertion loss, 50 ohm impedance, and 40 GHz max operating frequency. Ideal for high-frequency signal transmission in applications requiring a right-angle jack connector with snap coupling type and PTFE insulator material.
INSERTION LOSS MAX AT: 1 GHZ, VSWR MAX AT: 18 GHZ
.26 inch
.1 dB
1.2 A
GOLD/NICKEL
1.25
© 2023 All rights reserved
