Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF QMA CONNECTOR;
Median Price
$6.230
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
$5.800
1k+ parts
$5.130
10k+ parts
$4.940
Newark
$6.150
PEI Genesis
Verical
$6.190
DigiKey
$6.600
Chip1Stop
$6.980
Farnell
$8.670
Powell Electronics
Nova Conductors
$5.736
TestEquity
Vyrian
Digiode
VNN
IBS Electronics
$6.188
TME
Netroflash
$5.450
$5.335
AZTECH Wire
$7.936
Corphita
Metaverse IC Inc.
Kepictronics
Assy Fe
Other Function RF Connectors 73254-0111 attributes and parameters. Explore more Other Function RF Connectors devices from Molex
Connector Type:
73254-0111 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Gec Plessey Semiconductors
BAV99WT1G
Fairchild Semiconductor
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
261
Deltrol Controls
Other Relays;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
222197
Amphenol
Amphenol 222197 RF connector features gold contact finish, threaded coupling, and PTFE insulator. With a max operating temp of 165°C and min of -65°C, it's ideal for commercial applications up to 2 GHz frequency. This male plug connector has a characteristic impedance of 75 ohm for cable mounting in various RF setups.
25-7650
Vertiv
RF F CONNECTOR; Manufacturer Series: 25-7650;
RECE.20449.001E.01
Taoglas
Taoglas RECE.20449.001E.01 is a 50 ohm RF connector with gold finish, operating from -40 to 90°C, suitable for 6 GHz applications. It features SNAP coupling, FEMALE contact gender, and SURFACE MOUNT termination ideal for BOARD mounting in various RF systems.
1056721-1
TE Connectivity's 1056721-1 RF Connector features a 50 ohm impedance, stainless steel shell, and operating temperatures ranging from -65 to 165°C. Ideal for applications requiring a single port RF connection with straight mounting style.
302102
RF SMP CONNECTOR; Manufacturer Series: 302102;
25-7630
RF F CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Characteristic Impedance: 75 ohm; Body or Shell Style: JACK; Polarization Key: POLARIZED HOUSING;
1340150
Phoenix Contact
RF CONNECTOR;
8-1393670-3
TE Connectivity's 8-1393670-3 is a RF connector with a body diameter of 0.287 inch and depth of 0.433 inch. It has a slide-on coupling type and is made of polytetrafluoroethylene insulator material. This connector is commonly used in commercial applications with a max operating frequency of 10 GHz.
SMP-MSSB-PCS
SMP-MSSB-PCS by Amphenol is a RF SMP connector with 50 ohm impedance, suitable for applications up to 18 GHz. Featuring gold-plated brass contacts, it offers high durability with 500 cycles and low contact resistance of 6 mohm. With a compact body size and surface mount termination, it is ideal for commercial RF connectivity needs.
1056722-1
TE Connectivity's 1056722-1 RF SMP Connector features a 50 ohm impedance, stainless steel shell, and -65 to 165 °C operating temperature range. Ideal for applications requiring high-frequency signal transmission in harsh environments.
FFA.00.250.NTAC31Z
Lemo Usa
FFA.00.250.NTAC31Z by Lemo Usa is a RF CONNECTOR with SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for applications requiring a max operating frequency of 1.5 GHz, solder termination, and a voltage standing wave ratio of 1.25.
BJ770-GL
Bel Fuse
BJ770-GL by Bel Fuse is a RF TRB connector with 0.562" body diameter and 0.487" body depth. It has a nickel shell finish, brass shell material, and solder termination type. Ideal for commercial applications at 0.5 GHz frequency, it features a female contact gender and straight mounting style with locking option.
U.FL-R-SMT-1(32)
Hirose Electric
RF CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: Gold (Au); Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4;
5415322-2
TE Connectivity's 5415322-2 RF Connector features a body length of 0.75", insulation resistance of 5x10^9 ohm, and max operating frequency of 1 GHz. Ideal for board mounting applications, this female jack connector with a characteristic impedance of 75 ohm is designed for commercial reliability in electronic systems.
L17DM53740
RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Maximum Operating Temperature (Cel): 125; Minimum Operating Temperature: -55 Cel; Termination Contact Finish: TIN OVER NICKEL; Contact Material: NOT SPECIFIED;
EHP.3T.675.CTL
EHP.3T.675.CTL by Lemo Usa is a threaded RF F connector with 75 ohm impedance and 1.2 GHz frequency, ideal for cable mounting applications. Featuring PTFE insulator material, solder termination, and male contact gender, it ensures low VSWR of 1.2 for high-quality signal transmission in various RF setups.
EM30MSD-A
OTHER RF CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: Silver (Ag);
PL3155AC-201
Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Manufacturer Series: PL3155AC; Body or Shell Style: PLUG; Shell Material: BRASS;
27075
RF MHV CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
2101510-2
TE Connectivity's 2101510-2 RF SMPM Connector operates b/w -65 to 165°C, with a characteristic impedance of 50Ω. Featuring a stainless steel shell, it has one connector and four contacts for board mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7325-1512-060
Radiall S A
RF SSLB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Diameter: .187 inch; Total No. of Contacts: 1; Maximum Operating Frequency: 12.4 GHz;
73252-0090
Molex
Molex 73252-0090 RF Connector has a snap coupling, PTFE insulator, and 50 ohm impedance. Ideal for board and panel mounting in applications up to 40 GHz with female contact gender. Operating range from -65°C to 155°C makes it versatile for various industries.
73254-0460
RF QMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Characteristic Impedance: 50 ohm; Body Diameter: .255 inch;
73254-5010
RF QMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Ports: 1; Characteristic Impedance: 50 ohm; Body or Shell Style: JACK;
73254-5011
RF QMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mounting Option-1: LOCKING; Insulator Material: POLYTETRAFLUOROETHYLENE; Mounting Style: RIGHT ANGLE;
73254-0070
RF QMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
73254-0090
RF QMA CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
73254-0100
RF QMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; Characteristic Impedance: 50 ohm; Mounting Option-1: LOCKING;
73254-0110
RF QMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
73254-0190
RF QMA CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; Contact Material: BRASS; Termination Contact Finish: Gold (Au);
73254-0240
RF QMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .709 inch; Shell Material: BRASS; Termination Type: SOLDER;
73254-0260
RF QMA CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Maximum Insertion Force (N): 24.9088; Manufacturer Series: 73254;
73254-0091
RF QMA CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
73254-0241
Molex 73254-0241 RF QMA Connector features snap coupling, gold finish, and 50 ohm impedance. Ideal for board and panel mounting in applications requiring a max operating frequency of 18 GHz.
73254-0242
RF QMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 18 GHz; Total No. of Contacts: 1; Shell Material: BRASS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved