Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF QMA CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Andel Nordic
$3.461
$3.322
Corphita
Kepictronics
Other Function RF Connectors 73254-0110 attributes and parameters. Explore more Other Function RF Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
73254-0110 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SPC TECHNOLOGY/ MULTICOMP
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Changzhou Starsea Electronics
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Eic Semiconductor
R222900310
Radiall S A
The Radiall S A R222900310 RF SMP CONNECTOR features a 0.13" body diameter, 0.264" body depth, and 5000000000 ohm insulation resistance. Ideal for RG-196 cable types, it operates at frequencies up to 12.4 GHz with a voltage standing wave ratio of 1.25. This female COAX connector is designed for commercial applications requiring high durability and reliability in temperatures ranging from -55°C to 125°C.
2391
Pomona Electronics
Pomona Electronics 2391 RF Connector features gold finish, bayonet coupling, and brass contact material. With 50 ohm impedance, it is ideal for solder termination in male-female connections. Suitable for straight mounting applications in various RF devices.
MM8130-2600B
Murata Manufacturing
MM8130-2600B by Murata Manufacturing is a panel mount RF connector with 0.083" body diameter, 500M ohm insulation resistance, and 0.1 dB insertion loss. It operates b/w -40 to 85°C, has a VSWR of 1.2 at 6 GHz, and is ideal for commercial applications requiring a durable female coaxial jack connector.
PRF24-J-C-EP-085-SS
Samtec
Samtec's PRF24-J-C-EP-085-SS RF Connector features a 0.33" body diameter and 0.985" depth, with threaded coupling. Ideal for cable mounting, it has solder clamp termination and female contact gender, suitable for various RF applications.
331-0472-260
Hirose Electric
OTHER RF CONNECTOR;
90001
Lapp Group Pvt
RF CONNECTOR; Body or Shell Style: PLUG; Manufacturer Series: Y92; IEC Conformity: NO; DIN Conformance: NO; MIL Conformity: NO;
1064538-1
TE Connectivity's 1064538-1 RF SSMT CONNECTOR features a body diameter of 0.1", insulation resistance of 1000000000 ohm, and EMI shielding. Ideal for commercial applications, this connector has a max operating frequency of 6 GHz and operates in temperatures ranging from -40 to 125 °C.
R223.435.000W
R223.435.000W RF MMBX Connector by Radiall S A features a low insertion loss of 0.423 dB and VSWR of 1.083, suitable for applications up to 12.4 GHz. With a characteristic impedance of 50 ohm, it is ideal for panel mount installations in high-frequency electronic systems requiring reliable signal transmission at temperatures ranging from -55 to 155°C.
PL455ACFLS-222
Vertiv
Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: CRIMP; No. of Ports: 1; Mounting Type: CABLE;
BJ3459ACP-201
RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Shell Finish: NICKEL; Contact Style: COAX; No. of Ports: 1;
PL155-47
RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Shell Material: BRASS; Maximum Operating Frequency: .5 GHz;
25-7650
RF F CONNECTOR; Manufacturer Series: 25-7650;
90002
Ddk
RF CONNECTOR; Manufacturer Series: Y92; Body or Shell Style: JACK; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO;
02K243-40ME3
Rosenberger Hochfrequenztechnik & Kg
02K243-40ME3 RF connector by Rosenberger features a 0.551" body length, 0.63 dB insertion loss, and 50 ohm impedance. Ideal for applications requiring high durability and reliability up to 40 GHz frequency in commercial settings.
3-1393670-9
3-1393670-9 by TE Connectivity is a RF connector with SCREW coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. It is used in commercial applications up to 10 GHz frequency for high durability and low contact resistance. The right angle mounting style with solder termination makes it suitable for panel installation.
SMZ6121A6-3GT30G-6-75
Amphenol
Amphenol's SMZ6121A6-3GT30G-6-75 RF Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and 1.2 Voltage Standing Wave Ratio. Ideal for commercial applications with a max operating frequency of 3 GHz, this connector is designed for use in RF systems requiring high reliability and a characteristic impedance of 75 ohm.
1056551-1
TE Connectivity 1056551-1 RF Connector features 50 ohm impedance, 0.12 dB insertion loss, and 26.5 GHz max frequency. Ideal for commercial applications, it has a durable beryllium copper shell with gold finish and PTFE insulator for high reliability in temperatures ranging from -65 to 165 °C.
R285.001.021
R285.001.021 by Radiall S A is a SNAP RF CONNECTOR with 50 ohm impedance, suitable for applications up to 6 GHz frequency. It features RIGHT ANGLE mounting style and can operate in temperatures ranging from -40°C to 90°C, making it ideal for various RF connectivity needs.
GRF1-J-P-08-E-ST-TH1-E
The Samtec GRF1-J-P-08-E-ST-TH1-E RF Connector has 8 ports, 50 ohm impedance, and operates up to 6 GHz. It is ideal for commercial applications requiring a reliable connector with gold finish contacts and PTFE insulation material. The connector features a straight jack body style with solder termination suitable for board mounting.
HK-LR-SR2
RF CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Molex
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved