Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other function RF connectors are a type of connector used in specialized radio frequency (RF) applications, where specific features are required for specialized functionality. They are designed to provide a reliable and stable connection between coaxial cables and RF equipment, while also maintaining low signal loss and high frequency performance.Other function RF connectors are available in a range of sizes and configurations, with different connector types and genders. They may include features such as sealing, grounding, or EMI shielding to ensure reliable performance in demanding applications.One advantage of other function RF connectors is their ability to provide specialized functionality, depending on the specific requirements of the application. For example, connectors may include specific impedance values, or may be designed for use in high-vibration or high-temperature environments.Other function RF connectors are commonly used in a variety of industrial applications, including telecommunications, wireless communication systems, and aerospace and defense applications. They may be used to connect antennas, receivers, transmitters, and other RF equipment, and may be subject to rigorous testing and qualification requirements to ensure their reliability and performance.
Add filters
All
Selected
L17DM53740
Amphenol
RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Maximum Operating Temperature (Cel): 125; Minimum Operating Temperature: -55 Cel; Termination Contact Finish: TIN OVER NICKEL; Contact Material: NOT SPECIFIED;
RF CONNECTOR
NOT SPECIFIED
TIN OVER NICKEL
e3
125
-55 Cel
282103-75
RF 1.0/2.3 DIN CONNECTOR; Manufacturer Series: 282103-75;
RF 1.0/2.3 DIN CONNECTOR
3-1532005-5
TE Connectivity
TE Connectivity's 3-1532005-5 RF Connector features threaded coupling, 50 ohm impedance, and crimp termination. With panel mount capability, it is ideal for cable and panel mounting applications in various electronic devices.
.44 inch
.605 inch
.65 inch
RECEPTACLE
50 ohm
NOT APPLICABLE
FEMALE
THREADED
NO
MULTIPLE MATING PARTS AVAILABLE
STRAIGHT
CABLE AND PANEL
GENERAL PURPOSE
YES
CRIMP
1
920-255P-51P
Amphenol 920-255P-51P RF Connector has 0.432" body diameter, 0.467" depth, and operates up to 6 GHz. With SNAP coupling type, it's a 50 ohm plug connector for boards with male solder termination. Operating from -65°C to 165°C, it ensures VSWR of 2 in various RF applications.
.467 inch
.432 inch
PLUG
MALE
SNAP
BOARD
6 GHz
165
-65 Cel
SOLDER
2
531-40165
Amphenol 531-40165 RF connector is a threaded, panel-mount jack with 75 ohm impedance and 0.46 dB insertion loss. Ideal for board mounting in applications up to 2.15 GHz frequency range, it features a zinc alloy shell, PTFE insulator, and solder termination for durability and signal integrity.
.43 inch
.263 inch
.47 inch
JACK
75 ohm
RF F CONNECTOR
COAX
500 Cycles
.46 dB
POLYTETRAFLUOROETHYLENE
LOCKING
RIGHT ANGLE
2.15 GHz
3 A
COMMERCIAL
TIN
ZINC ALLOY
Other RF Connectors
1.93
1045621-1
TE Connectivity 1045621-1 is a threaded RF SSMA connector with PTFE insulator, 50 ohm impedance, and 18 GHz frequency. Ideal for commercial applications requiring a female jack connector with right-angle mounting and solder termination. Operating temperature range from -65 to 165°C makes it versatile for various environments.
RF SSMA CONNECTOR
115/230VAC
PANEL
ONE
18 GHz
STAINLESS STEEL
RF SMA/SSMA Connectors
1330019-1
TE Connectivity's 1330019-1 RF SMP Connector features an insertion loss of 0.06 dB, dielectric voltage of 1400VAC, and insulation resistance of 5000000000 ohm. Ideal for commercial applications with a frequency up to 3 GHz, this connector is designed for RG-178/U cables with a characteristic impedance of 50 ohm.
RG-178/U
RF SMP CONNECTOR
3 mohm
1400VAC
.06 dB
5000000000 ohm
1330019
CABLE
3 GHz
GOLD
BERYLLIUM COPPER
1.2
2-330312-2
TE Connectivity's 2-330312-2 RF Connector features a 0.391" body diameter, threaded coupling type, and fluoropolymer insulator material. Ideal for applications requiring a polarized housing, this connector supports RG 161, RG 178A, RG 196, and RG 178 cables with a max operating frequency of 4 GHz.
APPLICABLE CABLES: RG 161/U; RG 178/U; RG 178A/U; RG 196/U
.391 inch
RG 161, RG 178A, RG 196, RG 178
FLUOROPOLYMER
2-330311-2
4 GHz
85
-40 Cel
POLARIZED HOUSING
SILVER
BRASS
2-330311-1
TE Connectivity 2-330311-1 RF Connector features threaded coupling, fluoropolymer insulator, and brass shell with gold finish. Suitable for RG-174/U cable type, it has a characteristic impedance of 75 ohm. Used in commercial applications with a temperature range of -65 to 85°C.
APPLICABLE CABLES: RG 179A/U, RG 187/U, RG 174/U, RG 188/U
.275 inch
RG-174/U
2-330312-1
2401
Pomona Electronics
Pomona Electronics' 2401 RF Connector features gold termination, bayonet coupling, and beryllium copper contact material. With a characteristic impedance of 50 ohm, it is ideal for solder termination in RF applications requiring female-female-male connectivity.
SHIELDED
Gold (Au)
FEMALE-FEMALE-MALE
BAYONET
e4
102-799-16
Amphenol 102-799-16 is a RF connector with a body diameter of 0.323 inch and insulation resistance of 10^10 ohm. It has a max operating temperature of 155°C and is commonly used in commercial applications for connecting cables with RG-316 type.
APPLICABLE CABLES: RG 174; RG 179; RG 187; RG 188; RG 316
.993 inch
.323 inch
RG-316
6 mohm
10000000000 ohm
10 GHz
155
NICKEL
PL11-3
Trompeter Electronics
Trompeter Electronics' PL11-3 RF CONNECTOR features BAYONET coupling, 75Ω impedance, and CRIMP termination. Ideal for CABLE mounting in applications requiring reliable MALE connectors with PLUG body style.
APPLICABLE CABLES: RG-55; RG-223
PL11
119S101-40ML5
Rosenberger Hochfrequenztechnik & Kg
119S101-40ML5 RF connector by Rosenberger features 0.09 dB insertion loss, gold termination contact finish, and SNAP coupling type. With a max operating frequency of 10 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance in high-frequency environments. Suitable for use in boards with surface mount termination.
.09 dB
PEEK/PTFE/LCP
SURFACE MOUNT
119S141-40ML5
Rosenberger's 119S141-40ML5 RF SMP Connector features 0.09 dB insertion loss, SNAP coupling type, and PEEK/PTFE/LCP insulator. Ideal for board mounting in applications up to 10 GHz requiring a 50 ohm characteristic impedance.
1063357-1
TE Connectivity 1063357-1 RF Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for commercial applications with -65 to 125 °C operating range. Female crimp termination with stainless steel shell for reliable panel mounting.
.475 inch
73415-5300
Molex
Molex 73415-5300 RF SMP Connector has a characteristic impedance of 50 ohm, operates up to 40 GHz, and features a gold shell finish. Ideal for high-frequency applications requiring surface mount termination on boards due to its female contact gender and straight mounting style.
.236 inch
.145 inch
40 GHz
73415-5720
Molex 73415-5720 RF SMP Connector features 0.75 dB insertion loss, 50 ohm impedance, and 40 GHz max operating frequency. Ideal for board mounting in applications requiring high-frequency signal transmission with a temperature range of -65 to 165°C.
ROHS COMPLIANT
.29 inch
.75 dB
1.5
73415-5740
Molex 73415-5740 RF SMP Connector features SNAP coupling, PTFE insulator, gold finish, and brass shell. With 50 ohm impedance and 40 GHz frequency, it's ideal for high-frequency applications. Suitable for surface mount board mounting with male contact gender in plug style.
.2 inch
.25 inch
1-330723-2
RF CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Durability: 200 Cycles;
APPLICABLE CABLES: RG 180/U, RG 180A/U, RG 195/U
RG-180/U
200 Cycles
2 GHz
2 A
1.3
1056550-1
TE Connectivity's 1056550-1 RF SMP Connector features an Insulation Resistance of 5G ohm, Insertion Loss of 0.62 dB, and operates up to 26.5 GHz. Ideal for applications requiring a durable, high-frequency RF connector with a characteristic impedance of 50 ohm and a max operating temperature of 165°C.
.23 inch
.047 SEMI-RIGID
100 Cycles
.62 dB
26.5 GHz
1.35
11_QMA-50-2-1/133_NE
Huber+suhner Ag
11_QMA-50-2-1/133_NE by Huber+suhner Ag is a RF connector with characteristic impedance of 50 ohm, operating up to 18 GHz. It features SNAP coupling, PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE insulator, and BRASS shell material. Ideal for applications requiring high-frequency signal transmission in temperatures ranging from -40 to 85 °C.
VSWR MAX AT 6 GHZ
.413 inch
PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE
11_QMA-50-2-1/133_NH
11_QMA-50-2-1/133_NH by Huber+suhner Ag is a RF CONNECTOR with SNAP coupling, suitable for cables with 0.413" diameter. With a characteristic impedance of 50 ohm and max operating frequency of 18 GHz, it's ideal for applications requiring high-frequency signal transmission in temperatures ranging from -40 to 85°C.
222153
RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; MIL Conformity: NO; Termination Type: CRIMP;
APPLICATION CABLE: RG 59/U
.745 inch
RG-59
NATURAL
1 GHz
60
5-1814821-1
TE Connectivity 5-1814821-1 RF Connector features SCREW coupling, 75 ohm impedance, and brass shell material. Ideal for commercial applications with a frequency up to 1 GHz. Panel mounted F connector with crimp termination and nickel finish for durability.
APPLICABLE CABLES: RG 59B/U, RG 62A/U, RG 140/U, RG 210/U
.803 inch
.374 inch
SCREW
5-1814826-1
TE Connectivity 5-1814826-1 RF F Connector has 75 ohm impedance, polypropylene insulator, and nickel shell finish. Ideal for RG-59B/U cable types, it is panel mountable with threaded coupling for commercial applications up to 2 GHz frequency.
.846 inch
RG-59B/U
100 mohm
50 Cycles
POLYPROPYLENE
5-1814826-3
TE Connectivity 5-1814826-3 RF Connector features threaded coupling, polypropylene insulator, and nickel shell finish. With 75 ohm impedance and RG 6 cable compatibility, it is ideal for commercial applications up to 2 GHz frequency range. The panel mount connector has a durability of 50 cycles and operates b/w -55°C to 85°C temperatures.
APPLICABLE CABLE: RG 6/U
RG 6
1996318-1
TE Connectivity's 1996318-1 RF SMPM Connector features a snap coupling type, PTFE insulator material, and 50 ohm impedance. Ideal for commercial applications requiring a durable connector with a max operating frequency of 20 GHz.
.257 inch
RF SMPM CONNECTOR
20 GHz
.123 inch
PRESS FIT
1996705-4
TE Connectivity's 1996705-4 RF SMPM CONNECTOR features SNAP coupling, stainless steel shell, and right angle mounting. With dimensions of 1.12" x 0.85" x 0.392", it operates b/w -55 to 105°C. Ideal for board mounting applications requiring a male contact gender with screw termination.
.85 inch
.392 inch
1.12 inch
105
6.1
8
1996777-2
TE Connectivity's 1996777-2 RF SMPM CONNECTOR has a temp range of -55 to 105°C, with 8 contacts and characteristic impedance of 50 ohm. It features stainless steel shell material, suitable for board mounting applications.
2101510-2
TE Connectivity's 2101510-2 RF SMPM Connector operates b/w -65 to 165°C, with a characteristic impedance of 50Ω. Featuring a stainless steel shell, it has one connector and four contacts for board mounting applications.
4
2157248-1
TE Connectivity's 2157248-1 RF SMPM Connector features a 0.19" body diameter, SNAP coupling type, and POLYTETRAFLUOROETHYLENE insulator. Ideal for applications requiring a 50 ohm characteristic impedance, such as commercial-grade systems operating up to 26 GHz frequency with male contact gender and solder termination.
.328 inch
.19 inch
.047 SEMI-RIGID, FLEXIBLE
26 GHz
.073 inch
1049081-2
TE Connectivity's 1049081-2 RF Connector features a 0.24" body diameter, 0.57" body depth, and 0.169 dB insertion loss. With a max operating frequency of 18 GHz, it is ideal for panel mount applications in high-frequency environments requiring a characteristic impedance of 50 ohm. The connector's snap coupling type and gold shell finish make it suitable for use in various RF communication systems.
.57 inch
.24 inch
.169 dB
1.23
96_MMPX-50-0-2/111_NM
96_MMPX-50-0-2/111_NM RF connector by Huber+suhner Ag features a SNAP coupling type, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm characteristic impedance. Ideal for applications requiring a durable FEMALE JACK connector with a max operating frequency of 65 GHz on BOARD mounting.
.151 inch
.154 inch
.138 inch
.197 inch
65 GHz
1.92
23_QN-50-0-1/133_NE
23_QN-50-0-1/133_NE RF connector by Huber+suhner Ag features a characteristic impedance of 50 ohm, max operating frequency of 11 GHz, and voltage standing wave ratio of 1.58. With a panel mount design and solder termination type, it is ideal for applications requiring reliable RF connections in high-frequency environments up to 125°C.
VSWR AT 6 GHZ: 1.5
.688 inch
.708 inch
.437 inch
PFA/PTFE
11 GHz
1.58
1052075-1
TE Connectivity's 1052075-1 RF Connector features 0.665" body length, 0.07 dB insertion loss, and 10000000000 ohm insulation resistance. Ideal for commercial applications with a frequency up to 26 GHz, this threaded connector has PTFE insulator material and operates b/w -65°C to 125°C.
APPLICABLE CABLES: RG 188/U; CAPTIVE CENTER CONTACT
.666 inch
.665 inch
RG 188A
.07 dB
PTFE
1.18
1056722-1
TE Connectivity's 1056722-1 RF SMP Connector features a 50 ohm impedance, stainless steel shell, and -65 to 165 °C operating temperature range. Ideal for applications requiring high-frequency signal transmission in harsh environments.
POLYTETRAFLUORO ETHYLENE/POLYETHYLENE
MS-147-C(LP)-1
Hirose Electric
MS-147-C(LP)-1 by Hirose Electric is a RF connector with 0.4 dB insertion loss, 50 ohm impedance, and 6 GHz operating frequency. It is used in commercial applications requiring durable connectors with snap coupling, gold finish, and male contact gender for cable mounting.
.276 inch
.539 inch
75 mohm
100VAC
12000 Cycles
.4 dB
1000000000 ohm
POLYAMIDE
-30 Cel
UL
P-CUSN
.315 inch
531-40047-3
Amphenol 531-40047-3 RF connector features threaded coupling, 75 ohm impedance, and 3 GHz frequency. Ideal for board mounting applications with female contact gender and right angle mounting style. Made of zinc shell material with polymethylpentene insulator for reliable performance in various RF connectivity setups.
.48 inch
1.3 inch
Tin (Sn)
POLYMETHYLPENTENE
ZINC
531-40047-4
Amphenol 531-40047-4 RF connector has a body width of 0.48" and depth of 1.3". With threaded coupling, it features tin termination finish and polymethylpentene insulator. Ideal for applications requiring a 75 ohm characteristic impedance, such as board-mounted connections in devices operating up to 3 GHz frequency.
R123415000
Radiall S A
R123415000 RF Connector by Radiall S A features a low insertion loss of 0.25 dB and gold termination contacts. With a 50 ohm impedance, it is ideal for applications requiring high frequency operation up to 18 GHz. This panel mount connector has a snap coupling type and is suitable for use in various RF applications.
CAPTIVE CENTER CONTACT
.25 dB
1.12
R222052000
R222052000 RF F CONNECTOR by Radiall S A features a 0.13" body diameter, 0.76 dB insertion loss, and gold (Au) termination with Ni barrier. With a 50 ohm impedance and max operating frequency of 40 GHz, it is ideal for high-frequency applications requiring low signal loss and reliable connections in straight cable installations.
VSWR AT 26.5 GHZ: 1.35
.252 inch
.13 inch
Gold (Au) - with Nickel (Ni) barrier
.76 dB
1.7
R222151000
The Radiall S A R222151000 RF SMP Connector features a low insertion loss of 0.76 dB and a VSWR of 1.35, suitable for high-frequency applications up to 40 GHz. With gold-plated contacts and PTFE insulator, it offers reliable performance in temperatures ranging from -65°C to 105°C. Ideal for cable mounting with a right-angle style, this connector is designed for use in various RF applications requiring a 50 ohm characteristic impedance.
CAPTIVE CENTER CONTACT, VSWR MAX AT 26.5GHZ
.05 inch
R222152000
The Radiall S A R222152000 RF SMP Connector features a low insertion loss of 0.76 dB and high VSWR of 1.35, suitable for applications up to 40 GHz. With gold-plated contacts and PTFE insulator, it offers reliable performance in temperatures ranging from -65°C to 105°C. Ideal for cable mounting with right-angle style, this connector is commonly used in RF communication systems.
.09 inch
R222052000W
The Radiall S A R222052000W RF SMP Connector has a body diameter of 0.09", insertion loss of 0.76 dB, and operates up to 40 GHz. With gold termination contact finish, it is ideal for high-frequency applications requiring a 50 ohm characteristic impedance. The connector features a straight mounting style and female contact gender for cable installations.
R222151000W
R222151000W by Radiall S A is an RF SMP connector with a max operating frequency of 40 GHz. It has a low insertion loss of 0.76 dB and a voltage standing wave ratio of 1.35. This connector is commonly used in applications requiring high-frequency signal transmission, such as telecommunications and aerospace industries.
GOLD (50) OVER NICKEL (50)
R222152000W
R222152000W RF SMP Connector by Radiall S A features a low insertion loss of 0.76 dB, gold termination with nickel barrier, and a max operating frequency of 40 GHz. Ideal for applications requiring high-frequency signal transmission, such as telecommunications and aerospace industries.
861V509ER6
Winchester Interconnect
861V509ER6 by Winchester Interconnect is a threaded RF connector with a max operating temperature of 65°C and a min operating temperature of -40°C. It has a characteristic impedance of 75 ohm and can handle frequencies up to 3 GHz. This connector is commonly used in applications requiring high-frequency signal transmission, such as telecommunications and wireless communication systems.
65
SOLDER AND SURFACE MOUNT
R285001021
R285001021 by Radiall S A is a SNAP type RF connector with 50 ohm impedance, suitable for up to 3 GHz frequency. It features a male wire termination and plug body style, ideal for cable mounting applications requiring high-frequency signal transmission.
OTHER RF CONNECTOR
WITH CABLE ASSEMBLY
WIRE
© 2023 All rights reserved
