Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
10220-55G3PC
3m Electronic Products Division
10220-55G3PC by 3M Electronic Products Division is a D-Sub Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 500VAC. It is used in applications requiring a reliable, right-angle mounting solution for PCB connections in commercial environments.
3M, SHIELDED
.37 inch
.45 inch
1.31 inch
RECEPTACLE
OTHER D TYPE CONNECTOR
GOLD (30) OVER NICKEL (100)
GOLD FLASH OVER NICKEL
FEMALE
COPPER ALLOY
RECTANGULAR
NO
500VAC
500000000 ohm
BEIGE
GLASS FILLED POLYCYCLOHEXYLENE TEREPHTHALLATE
e4
0.05
M2.5
THREADED
RIGHT ANGLE
BOARD AND PANEL
4
2
105
-55 Cel
GENERAL PURPOSE
STAGGERED
1.905
30u
1 A
UL
COMMERCIAL
NICKEL
GLASS FILLED PCT
D Type Connectors
.11 inch
2.54
SOLDER
20
94V-0
10226-2200PE
10226-2200PE by 3M Electronic Products Division is a D-Sub Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for board mounting applications in commercial settings due to its high reliability, gold-plated contacts, and surface mount termination type.
3M, LATCHED, PANEL MOUNTABLE, SHROUDED
.36 inch
.23 inch
1.465 inch
GOLD (20) OVER NICKEL (80)
Gold (Au) - with Nickel (Ni) barrier
CENTRONIC
700VAC
PCT-POLYESTER
102
LOCKING
MOUNTING FLANGE
STRAIGHT
BOARD
6.8072
20u
ZINC ALLOY
1.27
SURFACE MOUNT
26
10226-2210PE
10226-2210PE by 3M is a D-Sub Connector with 26 contacts, gold-plated copper alloy, and PCT-POLYESTER insulator. It has a mating contact pitch of 0.05", withstands up to 700VAC, and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its high insulation resistance and UL certification.
10226-55G3PL
The 3m Electronic Products Division D-Sub Connector 10226-55G3PL features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 500VAC. Ideal for board and panel mounting applications, this connector has a female contact gender with gold flash over nickel finish for reliable signal transmission in commercial settings at temperatures ranging from -55 to 105°C.
1.46 inch
GOLD (8) OVER NICKEL (50)
8u
10226-R21TS
10226-R21TS D-Sub Connector by 3M EPD features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 500VAC. Ideal for board and panel mounting applications, this connector has a total of 26 contacts, gold flash termination finish, and operates b/w -20°C to 85°C temperature range.
GOLD (30) OVER NICKEL (80)
Gold Flash (Au) - with Nickel (Ni) barrier
BLACK
POLYBUTYLENE TEREPHTHALATE
85
-20 Cel
.16 inch
PRESS FIT
10236-55G3PC
10236-55G3PC by 3M is a D-Sub Connector with 36 contacts, rated for 1A signal current. It features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operates b/w -55°C to +105°C. Ideal for board and panel mounting applications requiring reliable female connectors with gold-nickel finish.
1.71 inch
36
10236-55H3PC
10236-55H3PC by 3M is a D-Sub Connector with 36 contacts, gold/nickel finish, and glass-filled PCT shell. It has a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operates b/w -55°C to +105°C. Ideal for board and panel mounting in commercial applications requiring reliable signal transmission.
GOLD OVER NICKEL
#4-40
10240-1210PE
10240-1210PE D-Sub Connector by 3M EPD features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 700VAC. Ideal for board and panel mounting applications, this connector has a female contact gender, gold-plated contacts, and operates in temperatures ranging from -55°C to 105°C.
COMPLIANT BOARDLOCK & PEGS
.368 inch
.394 inch
1.85 inch
GLASS FILLED POLYESTER
ONE
1
.635
40
10240-55G3PC
10240-55G3PC by 3M Electronic Products Division is a D-Sub Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 500MΩ, and Dielectric Withstanding Voltage of 500VAC. Ideal for commercial applications requiring a reliable right-angle receptacle connector with female contact gender and solder termination on board or panel mounting.
1.81 inch
10250-55H3PC
The 3m Electronic Products Division D-Sub Connector 10250-55H3PC features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and operating temperature range from -55°C to 105°C. Ideal for board and panel mounting applications, this connector has gold flash over nickel termination finish for reliable signal transmission in commercial settings.
2.06 inch
50
10268-55H3PC
The 3M Electronic Products Division's 10268-55H3PC D-Sub Connector features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 500VAC. Ideal for commercial applications, this connector has a total of 68 contacts, with a right-angle receptacle design suitable for board and panel mounting.
2.51 inch
68
L777RRC37P
Amphenol
Amphenol's L777RRC37P D-Sub Connector has 37 contacts, 2 rows, and a contact pitch of 0.109". With a dielectric voltage of 1200VAC, it operates b/w -55°C to 105°C. Ideal for commercial applications, this connector features crimp termination and a steel shell with UL94V-0 flammability rating.
.494 inch
.161 inch
2.729 inch
PLUG
D SUBMINIATURE CONNECTOR
NOT SPECIFIED
MALE
30 mohm
RND PIN-SKT
1200VAC
1000000000 ohm
GLASS FILLED POLYETHYLENE
0.109
0.112
MULTIPLE MATING PARTS AVAILABLE
CABLE AND PANEL
5 A
TIN
STEEL
4/C
CRIMP
37
DBML25S500M
Amphenol Communications Solutions
DBML25S500M by Amphenol is a D-Sub connector with 25 contacts, gold-plated for high reliability. With a body length of 2.07", it offers insulation resistance of 5Gohm and can handle up to 7.5A signal current. Ideal for commercial applications requiring reliable board and panel mounting in temperatures ranging from -55°C to 125°C.
.479 inch
.51 inch
2.07 inch
PHOSPHOR BRONZE
7.3 mohm
5000000000 ohm
POLYETHYLENE
M3
THREADED INSERT
125
7.5 A
CADMIUM
3/B
.157 inch
2.76
25
DDM50P300N
DDM50P300N by Amphenol is a D-Sub connector with 50 contacts, 3 rows, and rated current of 7.5A. It has a body length of 2.62", insulation resistance of 5Gohm, and operates b/w -55°C to 155°C. Ideal for commercial applications requiring reliable signal connections on PCBs with a mating contact pitch of 0.109".
.605 inch
.433 inch
2.62 inch
TIN LEAD
e0
3
155
2.8448
5/D
.197 inch
DDM50S043
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Rated Current - Signal: 7.5 A; Insulator Material: POLYETHYLENE;
.313 inch
SOCKET
0.108
PANEL
5747250-6
TE Connectivity
TE Connectivity's 5747250-6 D-Sub Connector features a Mating Contact Pitch of 0.108", Insulation Resistance of 1e9 ohm, and UL Flammability Code of 94V-0. Ideal for board mounting applications with a rated current of 6A, this connector is designed for commercial reliability in various electronic systems.
AMPLIMITE
.498 inch
1.213 inch
PREASSEM CONN
YES
POLYAMIDE/POLYESTER
6A
SCREWLOCKS
2.84
6 A
CARBON STEEL
1/E
.125 inch
2.74
9
5745187-7
TE Connectivity 5745187-7 D-Sub Connector has 25 contacts, 2 rows, and insulation resistance of 1G ohm. With a temperature range of -55 to 105°C, it is ideal for board mounting applications requiring a reliable female connector with solder termination.
.453 inch
2.088 inch
NOT APPLICABLE
20 mohm
2.224
HOLE .12
.188 inch
FCC17-B25SC-44B
Amphenol's FCC17-B25SC-44B D-Sub Connector features 25 contacts, gold mating finish, and polyethylene insulator. With a rated current of 5A, it is ideal for commercial applications requiring reliable signal transmission in temperatures ranging from -40 to 85°C. The connector offers a right-angle mounting style with solder termination for secure board attachment.
RIVET METAL BRACKET
.702 inch
GOLD (15) OVER NICKEL
Tin/Lead (Sn/Pb)
15 mohm
3000000000 ohm
0.11
-40 Cel
.15 inch
1-745491-6
TE Connectivity 1-745491-6 D-Sub Connector features 9 contacts, polyethylene insulator, and EMI shielding. With a temperature range of -55 to 105°C, it is ideal for commercial applications requiring a reliable signal current rating of 1.5A. The connector's steel shell and IDC termination make it suitable for discrete cable types with wire sizes ranging from 30 to 26 AWG.
ROHS COMPLIANT
.509 inch
.567 inch
1.228 inch
DISCRETE, ROUND
TIN OVER NICKEL
1.112
e3
1.5A
HOLE .115-.125
CABLE
1.5 A
2.77
IDC
26 AWG
30 AWG
.1112
10220-6212PC
The 3m Electronic Products Division D-Sub Connector features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage rating of 707VAC. Ideal for board and panel mounting applications, this connector has a total of 20 contacts, gold-plated copper alloy contacts, and UL flammability rating of 94V-0.
BELLOWED TYPE
707VAC
JACKSCREW
1.9
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
.134 inch
10280-6212PC
The 3m Electronic Products Division D-Sub Connector features a mating contact pitch of 0.05", insulation resistance of 500MΩ, and dielectric voltage withstand of 700VAC. Ideal for board and panel mounting applications, this connector has a total of 80 contacts, gold-plated finish, and UL flammability rating of 94V-0.
.358 inch
.228 inch
2.81 inch
SQ PIN-SKT
80
12226-8250-00FR
3m Electronic Products Division's 12226-8250-00FR D-Sub Connector features 26 contacts, gold-plated with nickel barrier. With a mating contact pitch of 0.031", it has an insulation resistance of 500MΩ and can withstand up to 350VAC. Ideal for board and panel mounting applications, this connector operates b/w -40°C to +70°C temperatures.
EMI SHIELDED
.2 inch
.42 inch
1.12 inch
350VAC
LIQUID CRYSTAL POLYMER
0.031
70
.5 A
0.8
1-5747301-6
TE Connectivity 1-5747301-6 D-Sub Connector features 37 contacts, 2 rows, and insulation resistance of 1000000000 ohm. With a body length of 2.732 inch and operating temperature range from -55 to 105 °C, it is ideal for board mounting applications requiring a reliable female connector with solder termination.
.236 inch
2.732 inch
POLYESTER
.17 inch
DCV8W8P700M30LF
DCV8W8P700M30LF by Amphenol is a D-Sub Connector with 8 contacts, polyethylene insulator, and copper nickel tin finish. It has male contact gender, right angle mounting style, and solder termination type. Ideal for commercial applications with temperature range of -55 to 125°C.
S0P8
SCREW
COPPER NICKEL TIN
.142 inch
8
GMR7590-25S2BNU
Glenair
Glenair's GMR7590-25S2BNU D-Sub Connector features 25 contacts with gold over nickel finish, rated at 3A signal current. With a mating contact pitch of 0.075", it is ideal for PCB applications requiring high reliability and operating temperatures ranging from -55 to 150°C. The connector's liquid crystal polymer insulator ensures insulation resistance of up to 5Gohm, meeting MIL standards for robust performance in commercial settings.
STANDARD: MIL-DTL-83513
.31 inch
.4 inch
1.185 inch
D MICROMINIATURE CONNECTOR
Tin/Lead (Sn60Pb40)
32 mohm
600VAC
2.78
0.075
150
3 A
ALUMINUM ALLOY
D
GMR7590-9S2BVU
Glenair's GMR7590-9S2BVU D-Sub Connector features 9 contacts, 3A signal current rating, and gold over nickel mating contact finish. With a temperature range of -55 to 150°C, it suits commercial applications requiring reliable connections on boards or panels. The connector's compact design with staggered PCB contact pattern makes it ideal for space-constrained setups.
.785 inch
GMR7590
JACKPOST
A
DC8W8PA00LF
DC8W8PA00LF by Amphenol is a D-Sub connector with 8 contacts, 2.714" body length, and polyethylene insulator material. It features crimp termination, copper nickel tin shell finish, and locking mounting option. Ideal for commercial applications requiring reliable male contact style in a steel shell with UL flammability rating of 94V-0.
2.714 inch
XM4L-1541-132
Omron
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Mixed Contacts: NO;
SHIELDED
.276 inch
1000VAC
0.09
0.078
-25 Cel
FLASH
2/A
2.286
15
XM4L-1542-132
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Mating Contact Finish: NOT SPECIFIED;
.646 inch
Gold Flash (Au)
.118 inch
1658659-1
TE Connectivity 1658659-1 D-Sub Connector features 25 contacts, 2 rows, and insulation resistance of 500M ohm. With a body length of 2.21", it is EMI shielded and operates b/w -55 to 105°C. Ideal for commercial applications requiring reliable signal transmission in harsh environments.
ROHS AND ELV COMPLIANT
.63 inch
1.66 inch
2.21 inch
.217 inch
GLASS FILLED POLYAMIDE
115/230VAC
3.7 A
.1946
10090098-S254XLF
Fci
10090098-S254XLF by Fci is a D-Sub Connector with 25 contacts, rated for 5A signal current. It features gold flash over nickel mating contact finish, glass-filled polyethylene insulator material, and a max operating temperature of 105°C. Ideal for board and panel mounting applications requiring high durability and reliability.
SPLIT BOARD LOCK
.283 inch
GOLD FLASH OVER NICKEL (30)
MATTE TIN OVER NICKEL
40 mohm
1400VAC
50 Cycles
4.8928
CLINCH NUT
.126 inch
891-008-31PA2-BRT1T
891-008-31PA2-BRT1T by Glenair is a D-sub connector with 31 contacts, gold mating finish, and staggered PCB contact pattern. It has an insulation resistance of 5Gohm, dielectric voltage of 350VAC, and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable signal transmission in compact spaces.
STANDARD: MIL-DTL-32139
.14 inch
.349 inch
.65 inch
D NANOMINIATURE CONNECTOR
GOLD
Tin/Lead (Sn63Pb37)
71 mohm
GLASS FILLED LIQUID CRYSTAL POLYMER
0.025
0.04
E
31
891-009-15SA2-BRT1T
The Glenair 891-009-15SA2-BRT1T D-Sub Connector features a Mating Contact Pitch of 0.025", Insulation Resistance of 5G ohm, and Dielectric Withstanding Voltage of 350VAC. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -55 to 125°C.
.454 inch
B
891-009-31SA2-BRT1T
The Glenair 891-009-31SA2-BRT1T D-Sub Connector features a Mating Contact Pitch of 0.025", Insulation Resistance of 5Gohm, and Dielectric Withstanding Voltage of 350VAC. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -55°C to 125°C.
891-009-9SA2-BRT1T
The Glenair 891-009-9SA2-BRT1T D-Sub Connector features a Mating Contact Pitch of 0.025", Insulation Resistance of 5G ohm, and Dielectric Withstanding Voltage of 350VAC. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -55 to 125°C.
.375 inch
L177RRA15S
Amphenol's L177RRA15S is a D-Sub Connector with 15 contacts. It has a mating contact pitch of 0.109", insulation resistance of 1,000,000,000 ohm, and can withstand up to 1200VAC. This connector is commonly used in cable and panel applications due to its crimp termination type and locking mounting option.
1.541 inch
L177RRB25S
The Amphenol L177RRB25S D-Sub Connector has 25 contacts with 0.109" pitch, suitable for commercial applications. With a dielectric voltage of 1200VAC and insulation resistance of 1Gohm, it operates b/w -55°C to 105°C. Its steel shell and crimp termination make it ideal for cable and panel mounting in various electronic systems.
L177RRC37S
Amphenol's L177RRC37S D-Sub Connector features 37 contacts, 0.109" pitch, and 2 rows. With a dielectric voltage of 1200VAC, it suits applications requiring reliable signal transmission in temperatures ranging from -55 to 105°C. Ideal for commercial use with UL certification, this connector offers crimp termination and locking mounting on cables or panels.
L177RRE09S
Amphenol's L177RRE09S D-Sub Connector features 9 contacts, 0.109" pitch, and 1200VAC dielectric voltage. Ideal for commercial applications with -55 to 105°C operating range, UL-rated for safety, and crimp termination on steel shell with locking mount option.
L717DD50P
The Amphenol L717DD50P D-Sub Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and 0.201" Body Depth. Ideal for commercial applications, this connector has a total of 50 contacts with a rated current of 7.5A and operates b/w -40 to 85°C temperatures.
.201 inch
BRASS
8.5 mohm
HOLE .112-.124
L777RRA15P
Amphenol's L777RRA15P D-Sub Connector features 15 contacts, 5A signal current rating, and 1200VAC dielectric voltage. Ideal for commercial applications with -55 to 105°C operating range, UL-rated for safety. Male crimp contact type with steel shell material and plug style design.
L77TWA3W3S
The Amphenol L77TWA3W3S D-Sub Connector features 0.27" contact pitch, 1.535" body length, and 5000000000 ohm insulation resistance. Ideal for commercial applications, this female connector with round pin sockets operates b/w -55°C to 155°C and has a dielectric voltage of 1000VAC.
.488 inch
.24 inch
1.535 inch
0.27
HOLE .122
1658607-1
TE Connectivity D-Sub Connector 1658607-1 with 50 contacts, matte tin finish, and polyethylene insulator. Ideal for ribbon cable applications with UL rating and EMI shielding. Operating temp -55 to 105°C, suitable for commercial use in electronics requiring reliable signal transmission.
LOW PROFILE, LATCHED
.606 inch
2.92 inch
RIBBON
Matte Tin (Sn) - with Nickel (Ni) barrier
25 mohm
4.0032
.032 inch
1.25A
#4-40UNC
1.25 A
28 AWG
3.9198
1658615-2
TE Connectivity D-Sub Connector 1658615-2 with 25 contacts, 0.109" pitch, and EMI shielding is ideal for cable mounting applications. Featuring a body length of 2.09", insulation resistance of 5Gohm, and operating temperatures from -55 to 105°C, it ensures reliable signal transmission in various environments.
.496 inch
.333 inch
2.09 inch
Tin (Sn) - with Nickel (Ni) barrier
1.668
1658684-1
TE Connectivity D-Sub Connector 1658684-1 with 62 contacts, 3 rows, and insulation resistance of 5 Gohm. Ideal for commercial applications, EMI shielded with steel shell material. Mating contact pitch of 0.109", suitable for -55 to 105°C operating temperature range.
.432 inch
2.41
62
22 AWG
1532204-1
TE Connectivity's 1532204-1 D MICROMINIATURE CONNECTOR has 25 contacts, rated at 3A. With a body size of 1.175" x 0.298" x 0.224", it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable female receptacle with staggered contact pattern and locking mounting option.
.298 inch
.224 inch
1.175 inch
3A
HOLE .087-.098
10090926-P446XLF
10090926-P446XLF by Amphenol is a D-Sub connector with 44 contacts, 3 rows, and insulation resistance of 5G ohm. It has a mating contact pitch of 0.09", suitable for board and panel mounting applications. With a temperature range from -55 to 105°C, it offers reliable signal current rating of 2.5A in commercial settings.
.638 inch
1050VAC
2.5 A
44
10090769-P444ALF
10090769-P444ALF by Amphenol is a D-Sub Connector with 44 contacts, rated for 2.5A signal current. It features a mating contact pitch of 0.09", insulation resistance of 5000000000 ohm, and dielectric voltage rating of 1050VAC. Ideal for commercial applications, it has a temperature range from -55 to 105°C and uses solder termination on carbon steel shell material.
.189 inch
24 AWG
© 2023 All rights reserved
