Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol L177RRB25S D-Sub Connector has 25 contacts with 0.109" pitch, suitable for commercial applications. With a dielectric voltage of 1200VAC and insulation resistance of 1Gohm, it operates b/w -55°C to 105°C. Its steel shell and crimp termination make it ideal for cable and panel mounting in various electronic systems.
Median Price
$0.712
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Arrow
1+ parts
$0.536
100+ parts
$0.393
1k+ parts
$0.363
10k+ parts
-
RS Americas
$0.737
$0.560
$0.450
Farnell
$0.756
$0.485
$0.356
Avnet
$0.853
$0.408
Newark
$1.140
$0.926
$0.702
DigiKey
$1.190
$0.859
$0.730
$0.685
Element14
$1.300
$0.835
$0.649
$0.635
Master Electronics
$0.686
$0.540
$0.500
Powell Electronics
$0.490
Verical
$0.610
TTI Europe
$0.389
$0.382
TTI
$0.396
Chip1Stop
Bristol Electronics
$1.650
$1.023
IBS Electronics
$0.954
$0.720
$0.638
Vyrian
Electro Sonic
$0.836
$0.475
$0.421
NAC Semi
$0.794
Rutronik
$0.687
$0.602
Nova Conductors
Velocity Electronics
Rapid Electronics
$0.770
Ampacity Inc.
$0.281
Allen Electronics Distributors
$0.656
$0.513
Gateway Technologies
$4.000
$3.560
Singapore Electronics
$4.400
$4.092
$3.916
$3.740
Advanced Electronics
$6.083
$5.536
$4.988
Authorized Procurement Solutions
GreenTree Electronics
Eastek
Continental Prestige Electronics
$0.326
Assy Fe
Netroflash
The close proximity of mating contacts ensures a secure and stable connection, reducing the risk of signal interference or loss.
The longer body length provides ample space for multiple contacts, making it suitable for applications requiring a higher number of connections.
High insulation resistance ensures reliable performance and minimizes the risk of electrical leakage or shorts.
The high dielectric voltage withstand capability makes this connector suitable for applications where high voltage levels are present, ensuring safety and reliability.
The high maximum operating temperature allows the connector to withstand harsh environmental conditions without compromising performance.
The use of steel in the shell construction provides durability and robustness, making the connector suitable for harsh industrial environments.
Low contact resistance ensures efficient signal transmission and minimal energy loss, contributing to overall system performance.
D-Sub Connectors L177RRB25S attributes and parameters. Explore more D-Sub Connectors devices from Amphenol
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Shell Size:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
L177RRB25S Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS123,215
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rfe International
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
D09P13A4GV00LF
Amphenol Communications Solutions
D09P13A4GV00LF by Amphenol is a D-Sub connector with 9 contacts, rated for 5A signal current. It features a mating contact pitch of 0.108", dielectric voltage withstand of 1400VAC, and operates b/w -55 to 125°C. Ideal for board mounting applications requiring reliable signal connections in commercial environments.
M83513/01-AN
TE Connectivity
TE Connectivity's M83513/01-AN D-Sub Connector features 9 contacts, 2 rows, and a body length of 0.775". With an insulation resistance of 5000000000 ohm, it operates b/w -55 to 125 °C. Ideal for cable mounting applications with a rated current of 3A and durable for up to 500 cycles.
M83513/02-FN
Omnetics Connector
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Contact Arrangement: S37P0;
M24308/2-4Z
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Total No. of Contacts: 37; Mating Contact Finish: NOT SPECIFIED;
8250-6005
3m Electronic Products Division
8250-6005 D-Sub Connector by 3M EPD features a Mating Contact Pitch of 0.108", Insulation Resistance of 1G ohm, and Dielectric Withstanding Voltage of 1400VAC. Ideal for commercial applications, this male connector has a total of 50 contacts, gold termination finish, and operates b/w -55 to +105°C.
M83513/03-A04N
Defense Logistics Agency
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
M24308/2-3F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Length: 2.088 inch; Mixed Contacts: NO;
M83513/04B04N
Bel Fuse
Bel Fuse's M83513/04B04N D-Sub Connector features 15 contacts, gold termination finish, and glass-filled polyethylene insulator. With a 600VAC dielectric voltage rating, it is ideal for military applications requiring reliable signal transmission in harsh environments. Operating temperature ranges from -55 to 125°C make it suitable for diverse industrial settings.
DE09-PA-M2-R-BL
Adam Tech
DE09-PA-M2-R-BL by Adam Tech is a D-Sub Connector with 9 contacts, rated at 5A signal current. It features a body length of 1.213", insulation resistance of 5000000000 ohm, and can operate b/w -55 to 105 °C. Ideal for commercial applications requiring reliable board mounting with solder termination.
M83513/03-G03N
Cristek Interconnects
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Mounting Option-1: HOLE .094;
1731070630
Molex
D SUBMINIATURE CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
MWDM2L-25SCBRP-.110
Glenair
The Glenair MWDM2L-25SCBRP-0.110 D-Sub Connector features 25 contacts, 0.05" pitch, and 600VAC dielectric voltage. Ideal for commercial applications, it has a temperature range of -55 to 150°C and offers high insulation resistance at 5Gohm. Suitable for board mounting with solder termination, this connector is MIL compliant and designed with glass-filled liquid crystal polymer insulator material.
M83513/02-CC
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-83513; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
M83513/03-G11N
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; MIL Conformity: YES;
1532210-1
TE Connectivity's 1532210-1 D-Sub Connector features PREASSEM CONN contact design, NICKEL shell finish, and BLACK insulator color. Ideal for applications requiring a D MICROMINIATURE CONNECTOR with 15 contacts in a PLUG body style.
M24308/4-1F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1768VAC; No. of Connectors: ONE; No. of Rows Loaded: 2;
M83513/03-A03N
Itt Cannon
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Contact Arrangement: S9P0;
M83513/01AC
Bel Fuse's M83513/01AC D-Sub Connector features 0.05" mating contact pitch, 5000000000 ohm insulation resistance, and 600VAC dielectric voltage. Ideal for military applications with MIL conformity, it offers a durable design with 500 cycles durability and solder termination for reliable performance in harsh environments at -55 to 125 °C.
5745968-7
TE Connectivity D-Sub Connector 5745968-7 features 25 contacts, EMI shielding, and insulation resistance of 1G ohm. With a temperature range of -55 to 105°C, it is ideal for commercial applications requiring a reliable signal current rating of 6A.
DA7W2SA00LF
DA7W2SA00LF by Amphenol is a D-Sub connector with 7 mixed contacts, nickel/gold termination finish, and polyethylene insulator. It is ideal for panel mounting applications requiring a female socket contact gender. The connector features a copper nickel tin shell finish and steel shell material, meeting UL flammability code 94V-0 standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L177RRA15S
Amphenol's L177RRA15S is a D-Sub Connector with 15 contacts. It has a mating contact pitch of 0.109", insulation resistance of 1,000,000,000 ohm, and can withstand up to 1200VAC. This connector is commonly used in cable and panel applications due to its crimp termination type and locking mounting option.
L177RRE09S
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1200VAC; UL Flammability Code: 94V-0;
L177RRE09SVF
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Contact Material: NOT SPECIFIED; Additional Features: STANDARD: MIL-C-24308;
L177RRE09SVFM
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Filter Feature: NO; Contact Material: NOT SPECIFIED;
L177DFAH15SOL2RM5
D SUBMINIATURE CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
L177DFAG15SOL2RM5
L177SDA15S
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mixed Contacts: NO; Termination Contact Finish: TIN OVER NICKEL;
L177SDE09SA4CH3F
D SUBMINIATURE CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
L177TSAG15SOL2RM5
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Filter Feature: NO; Insulator Material: GLASS FILLED POLYETHYLENE;
L177SDA15S1ACH3F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Shell Finish: TIN; IEC Conformity: NO; Additional Features: STANDARD: MIL-C-24308;
L177RRC37S
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1200VAC; Contact Style: RND PIN-SKT;
L177RREH09S
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
L177SDCG37SOL2RM5
D SUBMINIATURE CONNECTOR; Termination Contact Finish: TIN OVER NICKEL; JESD-609 Code: e3; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
L177TSCH37SOL2RM8
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: BRONZE; MIL Conformity: NO; Mating Contact Finish: TIN;
L177RRB25PVFM
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Minimum Wire Size: 28 AWG; Mating Contact Row Spacing (inch): 0.112;
L177RRB25PVF
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: STAGGERED; Maximum Wire Size: 20 AWG;
L177RRBF25PVF
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; DIN Conformance: NO; Mating Contact Finish: NOT SPECIFIED;
L177RRBG25SVFM
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Shell Size: 3/B; Contact Style: RND PIN-SKT;
L177RRBG25SVF
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: YES; Mating Contact Pitch (inch): 0.109;
L177RRBH25PVFM
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Maximum Wire Size: 20 AWG; Shell Size: 3/B;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved