Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
D25P13A4GL00LF
Amphenol Communications Solutions
D25P13A4GL00LF by Amphenol is a D-Sub Connector with 25 contacts, 2 rows, and insulation resistance of 5000000000 ohm. It has a body length of 2.07", mating contact pitch of 0.109", and operates b/w -55 to 125 °C. Ideal for commercial applications requiring reliable signal transmission in electronics with board and panel mounting options.
SPLIT BOARD LOCK
.531 inch
.577 inch
2.07 inch
PLUG
D SUBMINIATURE CONNECTOR
NOT SPECIFIED
MALE
STAGGERED
RND PIN-SKT
NO
4.8928
5000000000 ohm
BLACK
POLYESTER
0.109
0.112
M3
THREADED INSERT
RIGHT ANGLE
BOARD AND PANEL
ONE
2
125
-55 Cel
GENERAL PURPOSE
2.54
5 A
UL
COMMERCIAL
TIN/ZINC CHROMIUM
STEEL
3/B
D Type Connectors
.134 inch
2.76
SOLDER
25
94V-0
D25P82C6GV00LF
D25P82C6GV00LF by Amphenol is a 25-contact D-Sub connector with 2 rows, rated for 5A signal current. Featuring a mating contact pitch of 0.109", it has an insulation resistance of 5Gohm and can withstand up to 1400VAC. Ideal for board and panel mounting applications in commercial environments, this connector offers reliable performance with a temperature range from -55°C to 125°C.
ROHS COMPLIANT
PEG
.494 inch
.538 inch
RECEPTACLE
NOT APPLICABLE
10 mohm
1400VAC
POLYETHYLENE
MULTIPLE MATING PARTS AVAILABLE
#4-40
SCREWLOCKS
30u
TIN
.114 inch
PRESS FIT
.3058
D25S80C6GX00LF
D25S80C6GX00LF by Amphenol is a 25-contact D-Sub connector with gold flash termination, rated for 5A signal current. With a dielectric voltage of 1400VAC and operating temperatures from -55 to 125°C, it's ideal for commercial applications requiring reliable board or panel mounting in tight spaces.
.496 inch
GOLD FLASH
FEMALE
25 mohm
5.004
2.84
.126 inch
D25P82C6PA00LF
D25P82C6PA00LF by Amphenol is a D-Sub connector with 25 contacts, rated for 5A signal current. It features a dielectric voltage of 1400VAC and insulation resistance of 5Gohm, suitable for commercial applications. With a temperature range from -55 to 125°C, it offers reliable connectivity in various environments.
HOLE .122
LOCKING
179-015-513R571
Norcomp Interconnect Devices
179-015-513R571 D-Sub Connector by Norcomp features a Mating Contact Pitch of 0.109", Insulation Resistance of 1000 ohm, and Dielectric Withstanding Voltage of 1000VAC. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -55 to 105°C.
.772 inch
1.535 inch
AU
GOLD
BRASS
1000VAC
1000 ohm
POLYAMIDE
e4
BOARD
2+2
105
3.7338
FLASH
NICKEL
.125 inch
2.7686
15+15
179-015-313R571
Norcomp 179-015-313R571 D-Sub Connector features 0.109" mating contact pitch, 1.535" body length, and 1000VAC dielectric voltage. Ideal for board mounting applications in commercial settings with a temperature range of -55 to 105°C.
MALE/FEMALE
L77SDE09S1ACH4F
Amphenol
The Amphenol D-Sub Connector L77SDE09S1ACH4F features 9 contacts with 0.108" pitch, 1400VAC dielectric voltage, and 5A signal current rating. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -55 to 125°C.
TIN OVER NICKEL
PHOSPHOR BRONZE
15 mohm
8.896
GLASS FILLED POLYETHYLENE
e3
0.108
2.8448
.11 inch
2.7432
9
.5838
4STD09SCM99A10X
Conec
4STD09SCM99A10X by Conec is a D-Sub Connector with 9 contacts, made of copper alloy. It features a body length of 1.228" and width of 0.509", suitable for panel mounting applications. The insulator material is glass filled PBT, with a shell finish in tin, meeting UL standards for commercial reliability.
.509 inch
1.228 inch
PREASSEM CONN
AU ON NI
COPPER ALLOY
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
HOLE .112-.124
PANEL
1/E
SOLDER LUG
20 AWG
15-000933
The Conec 15-000933 D-Sub Connector has a body length of 1.551", insulation resistance of 5000000000 ohm, and operates b/w -25 to 105 °C. Ideal for board mounting applications, it features a total of 15 contacts with staggered PCB contact pattern and solder termination type.
.831 inch
.736 inch
1.551 inch
GLASS FILLED POLYESTER
3
-25 Cel
1.9812
8u
3 A
.13 inch
2.286
15
1-1740198-2
TE Connectivity
TE Connectivity 1-1740198-2 D-Sub Connector features 25 contacts, tin finish with nickel barrier, and glass-filled PCT insulator. With a rated current of 4.5A, it operates b/w -55 to 105°C. Ideal for board mounting applications in commercial settings due to UL certification and right-angle mounting style.
BOARD LOCK
Tin (Sn) - with Nickel (Ni) barrier
GLASS FILLED PCT
4.5A
#4-40 UNC
1
4.5 A
2.77
1-1740199-2
TE Connectivity 1-1740199-2 D-Sub Connector features 25 contacts, tin finish with nickel barrier, and glass-filled PCT insulator. With a rated current of 4.5A, it is ideal for commercial applications requiring a reliable right-angle plug connection on circuit boards. Operating temperature range from -55 to 105°C ensures durability in various environments.
747516-7
TE Connectivity 747516-7 D-Sub Connector with EMI shielding, polyethylene insulator, and tin plating. Rated for 5A signal current, suitable for commercial applications requiring reliable cable termination in a temperature range of -55 to 105°C.
DISCRETE, ROUND
YES
.455 inch
5A
STRAIGHT
CABLE
1.38
IDC
22 AWG
26 AWG
749805-7
TE Connectivity 749805-7 D-Sub Connector features EMI shielding, Tin (Sn) termination with Nickel (Ni) barrier, and Glass Filled Polyamide/Polyester insulator. Ideal for commercial applications, this connector has a max operating temperature of 105°C and min of -55°C.
.185 inch
GLASS FILLED POLYAMIDE/POLYESTER
115/230VAC
2.74
CRIMP
24 AWG
749805-8
TE Connectivity's 749805-8 D-Sub Connector is EMI shielded with TIN over NICKEL finish. It has 15 contacts, UL94V-0 rated insulator in BLACK color, and operates b/w -55 to 105°C. Ideal for commercial applications, it features CRIMP termination and PLUG body style for cable mounting.
2/A
749805-9
TE Connectivity 749805-9 D-Sub Connector with EMI shielding, TIN over nickel termination, and glass-filled insulator. Operating temp -55 to 105°C. Ideal for commercial applications requiring a reliable male plug connector with 25 contacts and crimp termination on 20-24 AWG wires.
749806-7
TE Connectivity 749806-7 D-Sub Connector features EMI shielding, TIN over nickel termination, and glass-filled polyamide/polyester insulator. Ideal for commercial applications with 9 contacts, crimp termination, and a temperature range of -55 to 105°C.
311P409-1P-B-12
TE Connectivity's 311P409-1P-B-12 D-Sub Connector features 9 contacts, 2 rows, and a body length of 1.228". With insulation resistance of 1000000000 ohm, it is ideal for commercial applications with operating temperatures ranging from -55 to 125°C. The connector has a male contact gender, gold shell finish, and crimp termination type.
7.3 mohm
44.48
1000000000 ohm
BLUE
7.5A
HOLE .115-.125
150u
7.5 A
UL, CSA
3.1136
2221860-5
TE Connectivity's 2221860-5 D-Sub Connector features polyethylene insulator, zinc shell finish, and UL 94V-0 flammability code. With a total of 78 contacts, it is ideal for commercial applications requiring a rated current of 5A. The connector operates in temperatures ranging from -55 to 125°C and uses crimp termination on a carbon steel shell.
ZINC
CARBON STEEL
5/D
2.29
78
1-1740196-5
TE Connectivity D-Sub Connector 1-1740196-5 with 15 contacts, rated at 4.5A for signal current. Features tin termination finish, glass-filled insulator material, and right-angle mounting style. Ideal for commercial applications requiring reliable board-to-board connections in a compact design.
.492 inch
.435 inch
1.543 inch
GLASS FILLED POLYCYCLOHEXYLENE TEREPHTHALLATE
3.4036
39u
179-037-613R571
Norcomp 179-037-613R571 D-Sub Connector features 37+37 contacts, 2+2 rows, and 5A signal current rating. With a mating pitch of 0.109", it is ideal for board mounting applications requiring a temperature range of -55 to 105°C. The connector's nickel-plated steel shell and polyamide insulator ensure reliable performance in commercial settings.
2.724 inch
4/C
37+37
3017W2SCT56N40X
3017W2SCT56N40X by Conec is a D-Sub Connector with 17 contacts, glass-filled PBT/PET insulator, and steel shell. It has a temperature range of -55 to 125°C and durability of 500 cycles. Ideal for commercial applications requiring reliable board and panel mounting with solder termination.
2.103 inch
SOCKET
HYBRID
500 Cycles
GLASS FILLED POLYBUTYLENE TEREPHTHALATE/POLYESTER
17
3007W2SCT56N40X
3007W2SCT56N40X by Conec is a D-Sub connector with 7 contacts, featuring mixed contacts and a body length of 1.556". It has a shell made of steel, plated with 30u tin, suitable for board and panel mounting applications. The connector's insulator material is glass filled PBT/polyester in green color, meeting UL standards for commercial reliability.
1.556 inch
S5P2
GREEN
7
DCM-8W8P-N
ITT Cannon
ITT Cannon's DCM-8W8P-N D-Sub Connector features 2.714" body length, 5000000000 ohm insulation resistance, and 1000VDC dielectric voltage. Ideal for commercial applications with -55 to 125 °C operating range, UL-rated with 94V-0 flammability code.
.224 inch
2.714 inch
S0P8
TIN LEAD
RECTANGULAR
1000VDC
e0
CADMIUM
8
DBM-5W5P-N
The ITT Cannon DBM-5W5P-N D-Sub Connector features 5 contacts with a dielectric voltage of 1000VDC. With a body length of 2.073" and insulation resistance of 5000000000 ohm, it is ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C. The connector's steel shell and locking mounting option make it suitable for various industrial uses.
2.073 inch
S0P5
5
163A16689X
The Conec 163A16689X D-Sub Connector features gold over nickel termination, glass-filled polybutylene terephthalate insulator, and copper alloy contacts. With a total of 78 contacts and rated current of 3A, it is ideal for commercial applications requiring reliable signal transmission in temperatures ranging from -55 to 125°C.
.281 inch
2.65 inch
GOLD OVER NICKEL
THREADED
4
.195 inch
A-DS09LL-WP
Assmann Wsw Components
A-DS09LL-WP by Assmann Wsw Components is a D-SUB Connector with 9 contacts, rated for 2A signal current. It features a waterproof design, male contact gender, and glass-filled polyamide insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -20 to 85°C.
.827 inch
.183 inch
20 mohm
500VAC
500000000 ohm
GLASS FILLED POLYAMIDE
#4-40UNC
CABLE AND PANEL
85
-20 Cel
WATERPROOF
1u
2 A
.112 inch
MK-242-015-235-2200
Airborn
MK-242-015-235-2200 by Airborn is a D-sub connector with 15 contacts, gold mating finish, and 3A signal current rating. It features a body length of 0.925", insulation resistance of 5Gohm, and operates b/w -55°C to 125°C. Ideal for board mounting applications requiring reliable commercial-grade connections.
.298 inch
.28 inch
.925 inch
GOLD (50)
Tin/Lead (Sn/Pb)
26 mohm
2.78
POLYPHENYLENE SULFIDE
0.05
LOCKNUT
1.905
50u
METAL
.14 inch
DBM-25P-K87
The ITT Cannon DBM-25P-K87 D-Sub Connector features 25 contacts, gold termination finish, and polyester insulator material. With a dielectric voltage of 1000VAC, it is ideal for commercial applications requiring a reliable signal current of up to 5A. This male connector has a shell made of steel and operates in temperatures ranging from -55°C to 105°C.
.39 inch
2.087 inch
MDM-15SSB-A174
MDM-15SSB-A174 by ITT Cannon is a D-sub connector with 15 contacts, rated for 3A signal current. It features liquid crystal polymer insulation, copper alloy contacts with gold finish, and can withstand up to 600VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
.308 inch
.23 inch
.935 inch
D MICROMINIATURE CONNECTOR
600VAC
LIQUID CRYSTAL POLYMER
0.043
HOLE .091
ALUMINUM ALLOY
B
MDM-9PSK-A174
MDM-9PSK-A174 by ITT Cannon is a D Microminiature Connector with 9 contacts, rated for 3A signal current. Featuring liquid crystal polymer insulation, it has a dielectric voltage of 600VAC and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable connections in compact spaces.
.785 inch
JACKSCREW
A
2DB52PF173
The ITT Cannon 2DB52PF173 D-Sub Connector features 52 contacts, gold termination finish, and glass-filled polyamide insulator. With a rated current of 5A, it is ideal for commercial applications requiring reliable signal transmission. Its compact design with crimp termination and male contact gender makes it suitable for cable and panel mounting in various electronic systems.
POLARIZED, LOW PROFILE
.324 inch
2.088 inch
9 mohm
3.336
0.075
0.065
CADMIUM/YELLOW CHROMATE
52
DDM-50P-K87
DDM-50P-K87 by ITT Cannon is a D-Sub connector with 50 contacts, rated for 5A signal current. It features gold termination finish, polyester insulator material, and can withstand up to 1000VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 105°C.
.605 inch
2.634 inch
50
DEMA-9S-A197
DEMA-9S-A197 by ITT Cannon is a 9-contact D-sub connector with TIN OVER NICKEL finish. It has a dielectric voltage of 1000VAC, rated for 5A signal current. Ideal for commercial applications, it operates b/w -55 to 125°C and supports wire sizes from 30 to 18 AWG.
.156 inch
1.213 inch
18 AWG
30 AWG
© 2023 All rights reserved
