Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol L717DD50P D-Sub Connector features 5000000000 ohm Insulation Resistance, 1400VAC Dielectric Withstanding Voltage, and 0.201" Body Depth. Ideal for commercial applications, this connector has a total of 50 contacts with a rated current of 7.5A and operates b/w -40 to 85°C temperatures.
Median Price
$10.210
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
RS Americas
1+ parts
$5.880
100+ parts
-
1k+ parts
10k+ parts
PEI Genesis
$8.600
Arrow
$8.763
$6.017
Farnell
$10.740
$8.010
$7.470
Element14
$13.904
$12.031
$10.365
Newark
$16.100
$13.230
Mouser Electronics
$21.390
$11.360
Verical
Chip1Stop
$9.680
Master Electronics
$11.980
DigiKey
Nova Conductors
$9.985
Vyrian
Electro Sonic
$11.470
$9.280
IBS Electronics
$16.802
$13.576
Rapid Electronics
TME
Mil-Aero Solutions, Inc.
Ampacity Inc.
$5.000
Gateway Technologies
$8.886
Netroflash
$9.486
$9.286
Continental Prestige Electronics
$10.970
$8.720
Singapore Electronics
$10.983
$10.214
$9.774
$9.335
Argo Parts USA
Perfect Parts
High insulation resistance ensures that there is minimal leakage current, leading to better signal integrity and reliability.
Withstanding high voltage ensures the connectors can handle high voltage applications safely and effectively.
Compact body depth allows for easy installation in tight spaces without compromising on performance.
Glass filled polyethylene provides excellent mechanical strength and thermal stability, making the connectors durable and reliable.
Having two rows loaded allows for increased contact density, making it suitable for applications requiring multiple connections.
High maximum operating temperature ensures the connectors can withstand demanding environmental conditions.
Low minimum operating temperature enables the connectors to function effectively in extreme cold environments.
Tin shell finish provides corrosion resistance and ensures a reliable electrical connection.
D-subminiature connectors are widely used and standardized, making them compatible with a variety of applications.
Brass contacts offer good conductivity and durability, ensuring a reliable electrical connection.
UL 94V-0 flammability rating ensures that the connectors meet strict fire safety standards.
Gold over nickel mating contact finish provides excellent conductivity and corrosion resistance, ensuring a long-lasting connection.
High rated current allows for carrying larger signal currents, making it suitable for high-power applications.
Black insulator color provides a sleek and professional look, suitable for various applications.
Compliance with UL standards ensures the connectors meet stringent quality and safety requirements.
Having 50 contacts allows for multiple connections in a single connector, ideal for complex systems.
Optimal row spacing facilitates easy mating and ensures a secure connection.
Panel mounting type allows for easy installation on panels, racks, or enclosures for convenient access.
Steel shell material provides robustness and durability, ensuring long-term performance.
Solder termination offers a reliable and secure connection method, ideal for permanent installations.
Male contact gender is commonly used for plugs, ensuring compatibility with other female connectors.
Low contact resistance ensures minimal power loss and heat generation, improving overall efficiency.
Plug body style allows for easy mating and unmating of connectors, simplifying maintenance and installation.
Round pin/socket contact style provides a reliable and secure connection, suitable for various signal transmission applications.
Locking mounting option ensures a secure connection that is resistant to vibration and accidental disconnection.
Hole size of 0.112-0.124 inches offers a precise and secure fit for installation, preventing any movement or misalignment.
Staggered contact pattern allows for better signal integrity with reduced crosstalk and interference.
Shell size 5/D provides compatibility with corresponding connectors and ensures a secure fit during mating.
Commercial reliability standards ensure consistent performance and durability for everyday use.
D-Sub Connectors L717DD50P attributes and parameters. Explore more D-Sub Connectors devices from Amphenol
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Shell Size:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
L717DD50P Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices Marking 17/Dec/2018
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Mde Semiconductor
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
M83513/04-B04N
TE Connectivity
TE Connectivity's M83513/04-B04N D-Sub Connector features 15 contacts, rated at 3A signal current. With a durable design for 500 cycles, it has a shell made of metal and insulation resistance of 5Gohm. Ideal for cable mounting applications with crimp termination, operating b/w -55 to 125°C.
182-009-113R531
Norcomp Interconnect Devices
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE; Plating Thickness (inch): FLASH;
2335890-3
TE Connectivity D-Sub Connector 2335890-3 has 25 contacts, rated at 7.5A for signal current. With a body size of 2.088" x 0.494" x 0.375", it operates b/w -55°C to 125°C. Ideal for cable mounting applications with stainless steel shell material.
M83513/03-G03N
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; Termination Type: CRIMP;
5-747909-2
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Contact Finish: TIN COPPER OVER NICKEL; Additional Features: AMPLIMITE;
57FE-30500-20N(D8)-3F
Ddk
57FE-30500-20N(D8)-3F by Ddk is a D-Sub Connector with a mating contact pitch of 0.085 inches, insulation resistance of 1G ohm, and a max operating temperature of 105°C. It is commonly used in commercial applications for signal transmission and features gold over nickel termination contact finish.
M24308/2-11F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO; Total No. of Contacts: 15;
M24308/3-3F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-2: LOCKING; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED;
M83513/01-CN
Amphenol
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-83513; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
M83513/02-GC
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-83513; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE;
M24308/3-2F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; MIL Conformity: YES; DIN Conformance: NO;
5747844-4
TE Connectivity's 5747844-4 is a D-Sub Connector with a mating contact pitch of 0.109", body length of 1.213", and insulation resistance of 1,000,000,000 ohm. It is commonly used in board mounting applications and has a max operating temperature of 105°C.
1-1532177-1
TE Connectivity 1-1532177-1 D-Sub Connector with 51 contacts, 3A signal rating, and liquid crystal polymer insulator. Ideal for commercial applications requiring reliable female wire termination with a max operating temperature of 125°C. Features staggered contact pattern and locking mounting option for secure cable installation.
DAM-3W3P-K87
Itt Cannon
The ITT Cannon DAM-3W3P-K87 D-Sub Connector features 3 male contacts with a pitch of 0.27". Made of steel, it has a shell size of 2/A and is suitable for panel mounting applications. With solder termination and polyethylene insulator material, this connector is ideal for use in electronic devices requiring reliable connections.
LD09S24A4GV00LF
Amphenol Communications Solutions
LD09S24A4GV00LF by Amphenol is a D-Sub connector with 9 contacts, rated for 5A signal current. It features a mating contact pitch of 0.108", insulation resistance of 5Gohm, and operates b/w -55°C to 105°C. Ideal for board mounting applications requiring reliable signal connections in commercial environments.
3-1393483-8
TE Connectivity 3-1393483-8 D-Sub Connector features EMI shielding, insulation resistance of 5G ohm, and operating temp range from -55 to 125 °C. Ideal for commercial applications, this female connector with 9 contacts is designed for board mounting with solder termination.
M24308/4-13F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; IEC Conformity: NO; Empty Shell: NO;
205203-8
TE Connectivity 205203-8 D-Sub Connector with 1.213" body length, EMI shielding, and polyethylene insulator is ideal for commercial applications. Rated at 105°C max operating temp, it features copper alloy contacts and UL94V-0 flammability code. Suitable for cable mounting with crimp termination, this connector has a total of 9 contacts in a single row configuration.
Cristek Interconnects
D MICROMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 600VAC; No. of Connectors: ONE; MIL Conformity: YES;
M24308/2-5F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 2.65 inch; DIN Conformance: NO; Mixed Contacts: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L717SDB25P
The Amphenol L717SDB25P D-Sub Connector features 25 contacts with brass material and gold flash finish. It is a male plug connector with steel shell, glass-filled polyethylene insulator, and tin shell finish. Suitable for board and panel mounting applications, this UL 94V-0 compliant connector offers reliable performance in various electronic devices.
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .163 inch; Contact Pattern: STAGGERED;
L717SDB25PC309
The Amphenol L717SDB25PC309 D-Sub Connector features 25 contacts, 2 rows, and a body length of 2.088". With a mating contact pitch of 0.109", it is ideal for applications requiring a rated current of 5A in cable mounting setups. The connector's insulator material is glass-filled polyethylene, ensuring reliable performance in various electronic systems.
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1555VAC; No. of Connectors: ONE; Empty Shell: NO;
L717SDB25PVF
Amphenol L717SDB25PVF D-Sub Connector features 25 contacts, rated at 5A signal current. With gold over nickel mating contact finish, it is ideal for cable mounting applications. The connector has a body length of 2.088", width of 0.494", and depth of 0.252", meeting MIL standards for robust performance.
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE; Mounting Type: CABLE;
L717SDB25P1ACH4F
Amphenol's L717SDB25P1ACH4F D-Sub Connector features 25 contacts, gold flash finish, and 5A signal current rating. With a body length of 2.088", it is ideal for board and panel mounting applications requiring a rugged steel shell and solder termination.
L717SDB25PA4CH4F
Amphenol's L717SDB25PA4CH4F D-Sub Connector features 25 contacts, gold flash mating finish, and UL 94V-0 flammability rating. With a body length of 2.088", it is ideal for board and panel mounting applications requiring a rated signal current of 5A. The connector's staggered PCB contact pattern ensures secure solder termination in male plug configuration.
L717SDB25PVFC309
L717SDB25PVFC309 by Amphenol is a D-Sub connector with 25 contacts, 2 rows, and a mating contact pitch of 0.109". It features insulation resistance of 1G ohm, dielectric voltage withstand of 1000VAC, and UL flammability rating of 94V-0. Ideal for signal currents up to 3A, this male connector with solder termination is suitable for cable mounting applications.
L717TWC8W8P
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; IEC Conformity: NO; Mounting Type: CABLE AND PANEL;
L717HDA26PD1CH4F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: TIN OVER NICKEL; Shell Material: STEEL;
L717TWA7W2P
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; No. of Connectors: ONE; No. of Rows Loaded: 2;
L717TWB17W2P
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Additional Features: STANDARD: MIL C24308, SHIELDED; Mating Contact Finish: GOLD (15) OVER NICKEL (50);
L717TWA3W3P
The Amphenol L717TWA3W3P D-Sub Connector features 0.27" contact pitch, 1.535" body length, and 5000000000 ohm insulation resistance. Ideal for applications requiring a robust connector with high dielectric voltage withstand and operating temperatures from -55 to 155°C.
L717SDA15P
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN OVER NICKEL; Shell Material: STEEL; MIL Conformity: NO;
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED POLYETHYLENE; Empty Shell: NO; Shell Material: STEEL;
L717SDE09P
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Size: 1/E; UL Flammability Code: 94V-0; MIL Conformity: NO;
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; MIL Conformity: NO; DIN Conformance: NO;
L717HDE15P
The Amphenol L717HDE15P D-Sub Connector features 15 contacts, 3A signal current rating, and 1000VAC dielectric voltage. Ideal for commercial applications, it has a temperature range of -55 to 125°C and utilizes gold over nickel mating contact finish. With a body length of 1.214", this connector is suitable for cable mounting with solder termination.
L717DE09P
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; No. of Rows Loaded: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved