Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
192061-02
National Instruments
National Instruments 192061-02 is a shielded communication cable with 26/30 AWG wire gauge, 2mm length, and VHDCI-68 MALE to D-68 FEMALE connectors. With 0.128 mm2 cross section area and 68 conductors, it's ideal for high-speed data transmission applications.
VHDCI-68 MALE
D-68 FEMALE
CABLE ASSEMBLY
.128 mm2
NO
2 mm
68
YES
26, 30
COMMUNICATION CABLE
153660989
Molex
Molex 153660989 flat cable with UL approval, shielded design, and 60V rated voltage. Ideal for FFC connectors in applications requiring -40 to 105 °C operating temperature range, 0.015 mm2 cross section area, and 0.5A rated current.
UL
TIN
COPPER
FFC
.015 mm2
.051 mm
105 Cel
-40 Cel
.5 A
60 V
1.46 ohm
35
FLAT CABLE
153661029
Molex 153661029 is a UL-approved electrical wire with shielding. It has a rated voltage of 60V and can operate b/w -40°C to 105°C. This flat cable, made of copper, is commonly used for FFC connectors and has a cross-section area of 0.015 mm2.
.305 mm
153661040
Molex 153661040 flat cable with UL approval, shielding, and copper conductor. Rated for 60V, 0.5A current, -40 to 105°C temp range. Ideal for FFC connectors in electrical applications requiring reliable signal transmission over short distances.
.152 mm
153661048
Molex 153661048 is a UL-approved shielded flat cable with a rated voltage of 60V. It has a tin conductor finish and can operate in temperatures ranging from -40 to 105 °C. This cable assembly, made of copper, is suitable for FFC connectors and has a cross-section area of 0.015 mm2.
.254 mm
153661049
Molex 153661049 flat cable with UL approval, shielded, rated for 60V & 105°C. Features tin-finished copper conductor, AWG 35 gauge, 0.015mm² cross-section area. Ideal for FFC to FFC connections in applications requiring reliable signal transmission.
153660097
Molex 153660097 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105 °C operating temp range. Ideal for FFC connectors in applications requiring 0.015 mm2 cross section area and 0.5A rated current.
153660207
Molex 153660207 flat cable with UL approval, shielding, and tin finish conductor. Rated for 60V voltage, -40 to 105°C temperature range. Ideal for FFC connectors in applications requiring 0.015mm2 cross section area and 0.5A rated current.
153660211
Molex 153660211 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105°C operating range. Ideal for FFC connectors in applications requiring 0.015mm2 copper conductor and 1.46 ohm resistance at 0.5A current.
.102 mm
153660317
Molex 153660317 is a UL-approved electrical wire with shielding. It has a rated voltage of 60V and can operate b/w -40°C to 105°C. This flat cable, made of copper, is commonly used for FFC connectors and has a cross-section area of 0.015 mm2.
153660984
Molex 153660984 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105°C operating temp range. Ideal for FFC connectors in applications requiring 0.015mm2 cross section area and 0.5A rated current.
153660988
Molex 153660988 is a UL-approved electrical wire with shielding, rated voltage of 60V, and max operating temperature of 105°C. It is a flat cable with FFC connectors on both sides, suitable for applications requiring a conductor material of copper, resistance of 1.46 ohm, and rated current of 0.5A.
153660537
Molex 153660537 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105°C operating range. Ideal for FFC connectors in electrical applications requiring 0.015mm2 cross section area and 0.5A rated current.
153660431
Molex 153660431 flat cable with UL approval, shielded design, and tin finish conductor. Ideal for FFC connectors in applications requiring 60V voltage rating, -40 to 105 °C operating temperature range, and 0.015 mm2 cross section area.
153660101
Molex 153660101 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105 °C operating temp range. Ideal for FFC connectors in applications requiring 0.015 mm2 cross section area and 0.5A rated current.
153660119
Molex 153660119 flat cable with UL approval, shielded design, and tin finish conductor. Ideal for FFC connectors, rated at 60V/0.5A with copper material and operating temperatures from -40 to 105°C.
153661028
Molex 153661028 flat cable with UL approval, shielding, and 60V rated voltage is ideal for FFC connectors. Featuring tin finish copper conductor, it operates b/w -40 to 105 °C with a resistance of 1.46 ohm and rated current of 0.5A.
153660427
Molex 153660427 is a UL-approved flat cable with shielding, rated for 60V and -40 to 105°C. Featuring tin-finished copper conductor, it has a cross section area of 0.015 mm2 and resistance of 1.46 ohm. Ideal for FFC connectors, this 0.051mm long cable supports up to 0.5A current in electrical applications.
153660215
Molex 153660215 flat cable with UL approval, shielding, and 60V rated voltage. Ideal for FFC connectors, operating b/w -40 to 105 °C. Features tin finish copper conductor, 0.015 mm2 cross-section area, and 1.46 ohm resistance for applications requiring 0.5A current transmission.
153660219
Molex 153660219 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105 °C operating temp range. Ideal for FFC connectors in applications requiring 0.015 mm2 cross section area and 0.5A rated current.
.203 mm
192061-0R5
National Instruments 192061-0R5 is a stranded communication cable with shielding, tin finish, and polypropylene insulation. Featuring 59 copper conductors at AWG 30, it connects VHDCI-68 MALE to SCSI-II-68 MALE for data transmission applications.
SCSI-II-68 MALE
STRANDED
.0509 mm2
13.716 mm
POLYPROPYLENE
59
7X38
30
1375
Bda Connectivity
1375 by Bda Connectivity is a SOLID construction cable with POLYVINYLCHLORIDE jacket and COPPER ALLOY conductor. It is ideal for INDUSTRIAL VIDEO APPLICATIONS, rated at 600V with a temperature range of -20 to 80 °C. Diameter: 8.5mm, Stranding: 1X0.6, Shielding: YES, Insulator Material: POLYETHYLENE.
INDUSTRIAL VIDEO APPLICATIONS
COPPER ALLOY
WIRE AND CABLE
SOLID
8.5 mm
POLYETHYLENE
POLYVINYLCHLORIDE
1
80 Cel
-20 Cel
600 V
.063 ohm
1X0.6
2208-4
Weico Wire & Cable
Weico Wire & Cable 2208-4 is a stranded wire with shielding, rated for 1000V. Constructed with silver finish and extruded PTFE insulator, it operates b/w -60 to 200°C. Ideal for applications requiring flexible cord and fixture wire in electrical systems.
MIL-W-16878/22; UL
SILVER
8.366 mm2
5.334 mm
EXTRUDED PTFE
200 Cel
-60 Cel
1000 V
37X26
8
FLEXIBLE CORD AND FIXTURE WIRE
2220-0
Weico Wire & Cable 2220-0 is a stranded wire with shielding, rated for 1000V. Constructed with silver-coated copper alloy conductor and extruded PTFE insulator, it operates b/w -60 to 200°C. Ideal for applications requiring flexible cord and fixture wire in compliance with MIL-W-16878/5 and UL standards.
MIL-W-16878/5; UL
.518 mm2
1.727 mm
7X28
20
CF211-02-04-02
Igus
Igus CF211-02-04-02 is a 300V communication cable with CE, CSA, EAC, UL approvals. Features twisted construction, PVC jacket, TPE insulator. Suitable for applications requiring shielding and operating temperatures from -15 to 70°C.
CE; CSA; EAC; UL
BARE COPPER
TWISTED
.25 mm2
7.5 mm
THERMOPLASTIC ELASTOMER
4
70 Cel
-15 Cel
300 V
24
901403CYSL001
Alpha Wire
Alpha Wire's 901403CYSL001 is a flexible cord with CE, CSA, UL approvals. Featuring stranded construction, THERMOPLASTIC ELASTOMER jacket, and BARE COPPER conductor material. Ideal for applications requiring shielding and rated voltage of 600V in temperatures ranging from -30 to 90°C.
CE; CSA; UL
2.081 mm2
9.83 mm
304.8 mm
3
90 Cel
-30 Cel
.009 ohm
41X30
14
901403CYSL005
Alpha Wire's 901403CYSL005 is a flexible cord with 3 conductors, rated at 600V. Featuring stranded construction and THERMOPLASTIC ELASTOMER jacket material, it has a conductor made of BARE COPPER. With CE, CSA, UL approvals, it is ideal for applications requiring a temperature range of -30 to 90 °C.
30.48 mm
3600B/50
3m Electronic Products Division
3600B/50 by 3m Electronic Products Division is a POWER-LIMITED wire with 50 conductors, each made of TIN-coated COPPER ALLOY. It has a rated voltage of 150V and operates at temperatures up to 75°C. Ideal for electrical applications requiring shielding and approval from CUL and UL.
3M
CUL; UL
.081 mm2
8.1 mm
POLYVINYL CHLORIDE
50
75 Cel
150 V
7X36
28
POWER-LIMITED
3600B/14SF
3m Electronic Products Division's 3600B/14SF wire is a POWER-LIMITED cable with 14 conductors, each made of TIN-coated COPPER ALLOY. It has a rated voltage of 150V and operates at up to 75°C. The cable is shielded with POLYVINYL CHLORIDE jacket material, making it suitable for electrical applications requiring approvals from CUL and UL.
5.6 mm
3600B/20SF
3m Electronic Products Division's 3600B/20SF wire features 20 conductors, stranded construction, and PVC jacket. With UL approval and 150V rating, it is ideal for power-limited applications requiring shielding at a max temp of 75°C.
6.1 mm
3600B/40SF
3600B/40SF wire by 3m Electronic Products Division is a POWER-LIMITED cable with 40 conductors, each made of TIN-coated COPPER ALLOY. It has a rated voltage of 150V and features POLYVINYL CHLORIDE insulation for use in electrical applications requiring shielding and a max operating temperature of 75°C.
7.6 mm
40
3600G/26
3600G/26 by 3m Elec. Prod. Div.: Stranded copper alloy wire with PVC jacket, shielded, rated for 150V; ideal for power-limited applications due to UL/CUL approvals and 75°C max temp; features 26 conductors, AWG28 gauge, and 7X36 stranding pattern.
6.4 mm
26
3600B/24
3600B/24 wire by 3m Electronic Products Division is a POWER-LIMITED cable with 24 conductors, shielded and approved by CUL & UL for up to 150V. It features STRANDED construction, PVC jacket, TIN finish on copper alloy conductor, and operates at max temp of 75°C. Ideal for electrical applications requiring flexibility and durability.
3600B/26SF
3m Electronic Products Division's 3600B/26SF wire is a POWER-LIMITED cable with 26 conductors, shielded and approved by CUL & UL for 150V. Featuring STRANDED construction, TIN finish, and PVC jacket, it is ideal for electrical applications requiring flexibility and durability.
3600B/14
3600B/14 wire by 3m Electronic Products Division is a POWER-LIMITED cable with 14 conductors, shielded with PVC jacket and rated for 150V. Featuring stranded construction, tin finish conductor, and copper alloy material, it's ideal for electrical applications requiring flexibility and durability in limited power settings.
3600B/50SF
3600B/50SF by 3m Electronic Products Division is a stranded electrical wire with a polyvinyl chloride jacket and shielding. It has a rated voltage of 150V and can operate at temperatures up to 75°C. This wire is commonly used for power-limited applications.
3600B/68SF
3m Electronic Products Division's 3600B/68SF wire is a POWER-LIMITED cable with 68 conductors, shielded and approved by CUL & UL for 150V. Featuring STRANDED construction, POLYVINYL CHLORIDE jacket, and TIN finish on COPPER ALLOY conductor, it's ideal for electrical applications requiring a max temperature of 75°C.
9.1 mm
RJ45-ECS
TE Connectivity
TE Connectivity's RJ45-ECS is a shielded communication cable with UL approval. It operates b/w -40°C to 85°C, ideal for wireless or video surveillance equipment indoors. Perfect for high-performance networking needs.
WIRELESS EQUIPMENT OR VIDEO SURVILLANCE EQUIPMENT AND INDOOR
85 Cel
RJ45-ECS-4
TE Connectivity's RJ45-ECS-4 is a shielded communication cable with UL approval. It operates b/w -40°C to 85°C, ideal for wireless and video surveillance equipment indoors.
RJ45-ECS-6
TE Connectivity's RJ45-ECS-6 is a UL-approved shielded communication cable with a temperature range of -40 to 85°C. Ideal for wireless and video surveillance equipment indoors.
RJ45-ECS-NR
TE Connectivity's RJ45-ECS-NR is a shielded communication cable with UL approval. It operates b/w -40°C to 85°C, ideal for wireless and video surveillance equipment indoors.
RJ45-ECS-4-NR
TE Connectivity's RJ45-ECS-4-NR is a UL-approved shielded communication cable with a temperature range of -40 to 85°C. Ideal for wireless and video surveillance equipment, it ensures reliable connectivity in indoor environments.
RJ45-ECS-6-NR
TE Connectivity's RJ45-ECS-6-NR is a UL-approved shielded communication cable with a temperature range of -40 to 85°C. Ideal for wireless and video surveillance equipment, it ensures reliable connectivity in indoor settings.
1418077
Phoenix Contact
CABLE ASSEMBLY; Connector Side-1: M12 PLUG; Connector Side-2: M12 PLUG; Rated Voltage: 48 V; Rated Current: 4 A; Shielding: YES;
IP65, IP67
IEC 61076-2-101; UL
M12 PLUG
.14 mm2
POLYURETHANE
10 mm
4 A
48 V
7X0.16
1418076
5 mm
1192101
Phoenix Contact 1192101 is a stranded communication cable with THERMOPLASTIC ELASTOMER jacket and shielded construction. It has 8 conductors, each made of COPPER ALLOY with TIN finish. Rated for 600V, it's ideal for M12 PLUG connections in applications requiring a temperature range of -40 to 80°C.
IP65
.2 mm2
7.4 mm
2 A
7X0.20
RF174-05BJ3-03RP1-0305
Samtec
Samtec RF174-05BJ3-03RP1-0305 is a PVC jacketed communication cable with shielding, suitable for TNC jack to MMCX plug connections. Featuring 24 AWG bare copper conductor, it has a cross section area of 0.205 mm2 and can handle up to 5A current. Operating temperature range from -20°C to 80°C makes it ideal for various electrical applications.
TNC JACK
MMCX PLUG
.205 mm2
5 A
1404515
CABLE ASSEMBLY; Connector Side-1: USB A 3.0 FEMALE; Connector Side-2: USB 3.0 A MALE; Rated Voltage: 30 V; Shielding: YES; DIN Conformity: NO;
USB A 3.0 FEMALE
USB 3.0 A MALE
1 mm
-5 Cel
30 V
24, 28
© 2023 All rights reserved
