Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Serial Communication Controllers Z85C3006CME attributes and parameters. Explore more Serial Communication Controllers devices from Zilog
Address Bus Width:
Boundary Scan:
Maximum Clock Frequency:
Communication Protocol:
Data Encoding or Decoding Method:
Maximum Data Transfer Rate:
External Data Bus Width:
JESD-30 Code:
JESD-609 Code:
Low Power Mode:
No. of DMA Channels:
No. of I/O Lines:
No. of Serial I/Os:
No. of Terminals:
On Chip Data RAM Width:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
RAM Words:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
Z85C3006CME Peripheral ICs trade compliance attributes, and parameters.
HTS
8542.31.00.01
SB
8542.31.00.00
Zilog is a trusted supplier of application-specific embedded system-on-chip (SoC) solutions for the industrial and consumer markets. From its roots as an award-winning architect in the microprocessor and microcontroller industry, Zilog has evolved its expertise beyond core silicon to include SoCs, single-board computers, application-specific software stacks and development tools that allow embedded designers quick time to market in areas such as energy management, monitoring and metering, and motion detection.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
EU2B-YS303C
Idec
ROTARY SWITCH;
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
21143-TD
Intel
Intel 21143-TD is a Serial Communication Controller with 32-bit Address Bus, operating at 33.33 MHz clock frequency and supporting data rates up to 12.5 MBps. It is used in LAN applications for PCI and CardBus compatibility, featuring low power mode and boundary scan capability.
MAX3109ETJ+
Maxim Integrated
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HQCCN; Package Shape: SQUARE;
SCC2691AC1D24
Philips Semiconductors
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3107ETG+
Analog Devices
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn) - annealed;
MCP2518FDT-E/QBB
Microchip Technology
MCP2518FDT-E/QBB by Microchip is a Serial Communication Controller with 1 MBps data rate, operating at -40 to 125 °C. Ideal for automotive applications, it supports SYNC/BIT/BYTE protocols and SPI bus compatibility in a compact chip carrier package with low power mode.
HI-6138PQIF
Holt Integrated Circuits
HI-6138PQIF by Holt Integrated Circuits is a Serial Communication Controller with 48 terminals, operating at 3.3V. It features 16384 RAM words, BIPH-LEVEL data encoding, and supports MIL-STD-1553B/1760 protocols. Ideal for industrial applications requiring high-speed communication up to 50MHz in temperature range of -40 to 85°C.
LU82562EZ
Intel's LU82562EZ is a Serial IO/Communication Controller with 196 terminals in a square grid array package. Operating at 3.3V, it is ideal for LAN applications requiring surface mount technology and bottom terminal position. The plastic/epoxy package body material ensures durability and reliability in various communication setups.
HI-3585PQTF
HI-3585PQTF by Holt Integrated Circuits is a Serial Communication Controller with 44 terminals, operating at 1 MHz clock frequency. It supports data transfer rates up to 0.015 MBps and has low power mode for efficient performance. Ideal for military-grade applications requiring asynchronous communication protocols.
LAN8700C-AEZG-TR
LAN8700C-AEZG-TR by Microchip: Serial Comm Controller with 3-3.6V supply, 12.5 MBps data rate, and 25 MHz clock freq. Ideal for LAN applications due to ASYNC/SYNC protocols and low power mode support.
CS8900A-IQ3
Cirrus Logic
CS8900A-IQ3 by Cirrus Logic is a Serial Communication Controller with 20-bit Address Bus, 16-bit External Data Bus, and 20 MHz Clock Frequency. It is used in LAN applications for ISA bus compatibility, featuring low power mode and boundary scan support.
LAN91C96-MS
Standard Microsystems
SERIAL IO/COMMUNICATION CONTROLLER, LAN; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
SCC2681AE1A44,512
NXP Semiconductors' SCC2681AE1A44,512 is a Serial Communication Controller with 5V supply, 4 MHz clock frequency, and 0.125 MBps data rate. Widely used in industrial applications for asynchronous communication protocols and serial I/O tasks due to its CMOS technology and 44 terminals in a chip carrier package.
SCC68681C1A44,518
NXP Semiconductors' SCC68681C1A44,518 is a Serial Communication Controller with 5V supply, 4MHz clock frequency, and 0.125 MBps data transfer rate. It is used in commercial applications for asynchronous communication protocols and serial I/Os.
ST16C654IQ100-F
Exar
Exar's ST16C654IQ100-F is a Serial Communication Controller with 4 I/Os, operating at 24 MHz clock frequency. It supports data rates up to 0.1875 MBps and has low power mode for energy efficiency. Ideal for industrial applications requiring asynchronous communication protocols.
SC16IS752IBS,128
SC16IS752IBS,128 by NXP Semiconductors is a Serial Communication Controller with 2 address bus width and 32 terminals. It operates at a max clock frequency of 80 MHz and supports communication protocols like ASYNC and BIT. Ideal for industrial applications requiring low power mode and high data transfer rates up to 0.625 MBps.
MCP25625-E/ML
MCP25625-E/ML by Microchip: Serial Communication Controller for CAN protocol. Operates at 2.7-5.5V, 125°C max temp, 0.125 MBps data rate. Ideal for LAN peripherals, SPI bus compatibility in automotive applications.
XR20M1172IL32-F
Exar's XR20M1172IL32-F is a Serial Communication Controller with 2MBps data rate, I2C communication protocol, and 24MHz clock frequency. Ideal for industrial applications, it operates b/w -40 to 85°C and supports low power mode with supply voltages of 1.62V to 3.63V.
SCC2681AC1N40
NXP Semiconductors' SCC2681AC1N40 is a Serial Communication Controller with 5V supply, 4 MHz clock frequency, and 0.125 MBps data rate. It is used for asynchronous communication in various applications requiring serial I/O interfacing.
XR16C2850IM
Exar's XR16C2850IM is a Serial Communication Controller with 48 terminals, supporting data rates up to 0.78125 MBps. It operates at temperatures ranging from -40 to 85 °C and has low power mode. Ideal for industrial applications requiring high-speed asynchronous communication over 8-bit external data bus.
MAX17851AUP/V+
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Zilog
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved