Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
ComSIT Distribution GmbH
First Choice Components Inc.
Inventory MP
Bristol Electronics
One Stop Electronics
$11.000
Ampacity Inc.
Semicontronic
$18.000
$17.550
$17.460
AZTECH Wire
$18.721
MARBEL Systems
$46.900
$45.024
Texas Native Microelectronics
$53.908
$51.752
Microchip USA
$57.316
Kenton Components
$64.690
$56.927
Modulus Dynamics
$117.415
Supply Digital
Corohmni
Perfect Parts
Corphita
Qasali Group International
$139.730
$128.085
Programmable Logic Devices (PLD) XCR3064XL-6VQ44C attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Xilinx
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Moisture Sensitivity Level (MSL):
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
XCR3064XL-6VQ44C Programmable ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev LeadFrame Chg 29/Oct/2018
Xilinx, Inc. (XIlinx) in February 2022 acquired by AMD
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
First Components International
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
ATF22V10CQZ-20PC
Atmel
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
EPM570GM100C5N
Altera
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: BGA; Package Shape: SQUARE;
EPF10K50VRC240-3N
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: HFQFP; Package Shape: SQUARE;
ATF750CL-15XU
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
SLG46110V
Renesas Electronics
SLG46110V by Renesas Electronics is a 1.8V OT PLD with 7 macro cells, 8 inputs, and 7 outputs in a square chip carrier package. Ideal for applications requiring low power consumption and compact design, it operates b/w -40 to 85°C temperatures with a max supply voltage of 1.89V.
EPM3128ATC100-5N
Intel
EPM3128ATC100-5N by Intel is a 128 macrocell EE PLD with 80 I/O lines, operating at a max clock frequency of 192.3 MHz. It features a propagation delay of 5 ns and can be used for in-system programmable applications requiring fast processing speeds and high I/O capabilities.
EPF10K20RC240-4
EPF10K20RC240-4 by Altera is a programmable logic device with 1152 logic cells, 189 inputs/outputs, and a maximum clock frequency of 67.11 MHz. It is suitable for applications requiring high-performance and flexibility in a compact package.
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
LC4032V-5TN44I
Lattice Semiconductor
LC4032V-5TN44I by Lattice Semiconductor is a 32 macrocell EE PLD with 5 ns propagation delay and 156 MHz clock frequency. Ideal for applications requiring fast processing speeds, it features in-system programmability, 30 I/O lines, and JTAG boundary scan testing capabilities.
EPM7064SLC44-7N
EPM7064SLC44-7N by Intel is a 64 macrocell EE PLD with 7.5ns propagation delay, operating at up to 166.7MHz clock frequency. It features in-system programmability and 36 I/O lines, suitable for applications requiring fast logic processing and versatile input/output configurations.
ATF1502AS-10AU44
ATF1502AS-10AU44 by Microchip Technology is a 5.5V PLD with 10ns propagation delay, featuring 32 macro cells and 36 inputs. Ideal for PAL-type applications, it offers in-system programmability, operates b/w -40 to 85°C, and supports JTAG boundary scan testing at up to 83.33MHz clock frequency.
XC2C384-10TQ144I
Xilinx
XC2C384-10TQ144I by Xilinx is a 384 macrocell FLASH PLD with 118 I/O lines, operating at 83 MHz. It features a propagation delay of 10 ns and can be used in industrial applications requiring programmable logic devices with in-system programmability.
EPM570F256C5N
EPM570F256C5N by Intel is a FLASH PLD with 440 macro cells, 160 inputs/outputs, and 8.7 ns propagation delay. Ideal for applications requiring in-system programmability, such as digital signal processing and communication systems. It features a grid array package style and JTAG boundary scan test capability.
XCR3256XL-10TQG144I
Xilinx XCR3256XL-10TQG144I is a 256 macrocell EE PLD with 120 I/O lines, operating at max 105 MHz. It has a propagation delay of 10 ns and supports in-system programmability. Ideal for industrial applications requiring high-speed processing within the temperature range of -40 to 85°C.
EPM7128SLC84-15N
Intel's EPM7128SLC84-15N is a 128 macrocell EE PLD with 15ns propagation delay, operating at up to 100MHz. It features in-system programmability and JTAG boundary scan test for versatile applications in commercial environments. With a package style of chip carrier and square shape, it offers 68 I/O lines and operates within a temperature range of 0-70°C.
GAL22V10D-5LJN
GAL22V10D-5LJN by Lattice Semiconductor is a CMOS-based PLD with 5 ns propagation delay, 132 product terms, and 142.8 MHz max clock frequency. Ideal for PAL-type applications requiring EE PLDs in commercial extended temperature environments. It features 22 inputs, 10 I/O lines, and a compact chip carrier package with J bend terminals.
EPM240T100I5
The Intel EPM240T100I5 is a FLASH PLD with 192 macro cells, 80 inputs/outputs, and 7.5 ns propagation delay. Ideal for applications requiring programmable logic devices in compact spaces with low power consumption and fast signal processing needs.
LC4256V-3FTN256BC
LC4256V-3FTN256BC by Lattice Semiconductor is a 256 macrocell EE PLD with 164 inputs and 160 I/O lines. Featuring a propagation delay of 3 ns, it operates at a max clock frequency of 212 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in a compact grid array package.
EPM7160STI100-10N
EPM7160STI100-10N by Intel is a 160 macrocell EE PLD with 10 ns propagation delay, suitable for industrial applications. It operates at a max clock frequency of 125 MHz and has 84 I/O lines, making it ideal for high-speed digital designs. With in-system programmability and JTAG boundary scan test capability, this PLD offers flexibility and ease of testing during development.
XC9536XL-10VQ44I
The Xilinx XC9536XL-10VQ44I is a 36 macrocell FLASH PLD with 34 inputs/outputs, operating at up to 138.88 MHz clock frequency. It features a propagation delay of 10 ns and can be in-system programmable, suitable for industrial applications requiring high-speed logic processing.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XCR3128XL-10VQG100C
Xilinx XCR3128XL-10VQG100C is a 128 macrocell EE PLD with 84 I/O lines, operating at max 95 MHz clock frequency. It has a propagation delay of 10 ns and supports JTAG boundary scan test. Ideal for applications requiring fast processing speeds and high I/O capabilities in commercial temperature environments.
XCR3032XL-7CSG48I
Xilinx XCR3032XL-7CSG48I is a 32 macrocell EE PLD with 7.5ns propagation delay, operating at max clock frequency of 119MHz. Ideal for industrial applications, it features in-system programmability and JTAG boundary scan test capability.
XCR3128XL-10VQG100I
Xilinx XCR3128XL-10VQG100I is a 128 macrocell EE PLD with 84 I/O lines. It operates at max clock frequency of 95 MHz, with propagation delay of 10 ns. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing.
XCR3256XL-10TQG144C
Xilinx XCR3256XL-10TQG144C is a 256 macrocell EE PLD with 120 I/O lines, operating at up to 105 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for applications requiring high-speed processing and versatile I/O capabilities in commercial-grade environments.
XCR3256XL-12TQ144I
Xilinx XCR3256XL-12TQ144I is a 256 macrocell EE PLD with 120 I/O lines, operating at max 88 MHz clock frequency. It has in-system programmability and JTAG boundary scan test capability. Ideal for industrial applications requiring fast propagation delay of 12 ns and wide temperature range from -40 to 85 °C.
XCR3032XL-10VQG44I
Xilinx XCR3032XL-10VQG44I is a 32 macrocell EE PLD with 36 I/O lines, operating at up to 95 MHz. It features a propagation delay of 10 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed logic functions in a compact form factor.
XCR3032XL-10VQG44C
XCR3064XL-10VQG44C
Xilinx XCR3064XL-10VQG44C is a 64-macrocell EE PLD with 36 I/O lines, operating at max 95 MHz clock frequency. It features in-system programmability, JTAG boundary scan test, and propagation delay of 10 ns. Ideal for applications requiring fast processing speeds and versatile I/O capabilities in commercial-grade environments.
XCR3064XL-10VQG100C
Xilinx XCR3064XL-10VQG100C is a 64 macrocell EE PLD with 68 I/O lines, operating at max 95 MHz. It features in-system programmability, JTAG boundary scan test, and propagation delay of 10 ns. Ideal for applications requiring fast processing speeds and versatile I/O configurations in commercial-grade environments.
XCR3128XL-10VQ100I
Xilinx XCR3128XL-10VQ100I is a 128 macrocell EE PLD with 84 I/O lines, operating at max 95 MHz clock frequency. It has in-system programmability and JTAG boundary scan test support. Ideal for industrial applications requiring fast processing and high I/O capabilities in compact form factor.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
XCR3128XL-10TQG144C
Xilinx XCR3128XL-10TQG144C is a 128 macrocell EE PLD with 108 I/O lines, operating at max clock freq of 95 MHz. In-system programmable, it has propagation delay of 10 ns and operates within -40 to +85 °C range. Ideal for applications requiring high-speed logic processing in commercial environments.
XCR3256XL-12TQ144C
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
XCR3128XL-10VQ100C
The Xilinx XCR3128XL-10VQ100C is a programmable logic device with 128 macro cells. It operates on a max supply voltage of 3.6V and has a propagation delay of 10ns. This PLD is commonly used for applications requiring in-system programmability and a clock frequency of up to 95MHz.
XCR3128XL-7TQG144I
XCR3256XL-10TQ144I
Xilinx XCR3256XL-10TQ144I is a 256 macrocell EE PLD with 120 I/O lines, operating at up to 105 MHz. It has a propagation delay of 10 ns and can handle supply voltages from 2.7V to 3.6V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing in a compact square package.
XCR3064XL-10VQG44I
Xilinx XCR3064XL-10VQG44I is a 64 macrocell EE PLD with 36 I/O lines, operating at max 95 MHz. It has a propagation delay of 10 ns and can handle supply voltages from 2.7 V to 3.6 V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing.
XCR3128XL-7VQ100I
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
XCR3064XL-10VQG100I
XCR3512XL-10PQG208C
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved