Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Programmable Logic Devices; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Finishing Of Terminal Used: MATTE TIN;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Digiode
AZTECH Wire
$10.462
MARBEL Systems
$27.917
One Stop Electronics
$30.000
Ampacity Inc.
$31.000
Semicontronic
$30.225
$30.070
Texas Native Microelectronics
$32.089
$28.238
Kenton Components
$38.507
$33.886
Qasali Group International
$86.640
$76.243
Corohmni
Corphita
Supply Digital
Programmable Logic Devices (PLD) XA2C64A-7VQG44Q attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Xilinx
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Terminal Finish:
JESD-609 Code:
XA2C64A-7VQG44Q Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Xilinx, Inc. (XIlinx) in February 2022 acquired by AMD
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
ATF1502ASV-15JU44
Atmel
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
EP1K50TC144-2N
Intel
EP1K50TC144-2N by Intel is a PLD with 2880 logic cells, 0.4 ns propagation delay, and 102 inputs. It operates at 2.5V, has a clock frequency of 37.5 MHz, and is suitable for applications requiring high-speed processing in commercial temperature environments.
5M40ZE64C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE;
ATF16V8B-10JU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE;
XC2C32A-4VQ44C
Xilinx
Xilinx XC2C32A-4VQ44C is a 32 macrocell FLASH PLD with 4 ns propagation delay, operating at up to 450 MHz clock frequency. It features 33 I/O lines, in-system programmability, and JTAG boundary scan test for versatile applications in programmable logic devices.
EPF10K50RC240-3N
EPF10K50RC240-3N by Intel is a PLD with 2880 logic cells, 0.6 ns propagation delay, and 66.67 MHz max clock frequency. Ideal for applications requiring high-speed data processing and complex logic operations in commercial-grade environments.
XC2C384-10TQ144I
XC2C384-10TQ144I by Xilinx is a 384 macrocell FLASH PLD with 118 I/O lines, operating at 83 MHz. It features a propagation delay of 10 ns and can be used in industrial applications requiring programmable logic devices with in-system programmability.
XC9572XL-7VQG44C
Xilinx XC9572XL-7VQG44C is a 3.3V CMOS PLD with 72 macro cells, 34 I/O lines, and 125MHz clock frequency. Ideal for applications requiring in-system programmability, such as digital signal processing and telecommunications equipment. Package: PLASTIC/EPOXY, Surface Mount: YES, Propagation Delay: 7.5ns.
EPM3256ATC144-10N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
LC4256V-75TN100C
Lattice Semiconductor
LC4256V-75TN100C by Lattice Semiconductor is a 3.3V EE PLD with 256 macro cells, 74 inputs, and 64 I/O lines. It has a propagation delay of 7.5 ns and operates at a max clock frequency of 111 MHz. Ideal for applications requiring in-system programmability and high-speed data processing in compact electronic designs.
EPM3064ATI100-10N
EPM3064ATI100-10N by Intel is a 64 macrocell EE PLD with 10 ns propagation delay and 100 MHz max clock frequency. Ideal for industrial applications, it features in-system programmability, 66 I/O lines, and JTAG boundary scan test capability.
5M570ZT100C4N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
EPM3032ATI44-10N
EPM3032ATI44-10N by Intel is a 32 macrocell EE PLD with 10ns propagation delay, operating at max 103.1MHz clock frequency. It features in-system programmability and 34 I/O lines, suitable for industrial applications requiring fast logic processing and versatile I/O capabilities. The PLD's compact square package with gull wing terminals makes it ideal for space-constrained designs demanding high-speed performance.
5M240ZM100C5N
Intel's 5M240ZM100C5N is a PLD with 192 macro cells, 79 I/O lines, and 118.3 MHz clock frequency. It uses CMOS technology, has in-system programmability, and supports JTAG boundary scan testing. Ideal for applications requiring fast processing speeds and high input/output capabilities.
EP1K30TI144-2N
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
LC4032V-5TN44C
LC4032V-5TN44C by Lattice Semiconductor is a 32 macrocell EE PLD with 32 inputs and 30 outputs. It has a max clock frequency of 156 MHz and can be used for programmable logic applications.
EPF10K30ATC144-3N
EPF10K30ATC144-3N by Intel is a PLD with 1728 logic cells, 0.9 ns propagation delay, and 102 inputs. It operates at a max frequency of 80 MHz and is ideal for applications requiring high-speed processing in commercial environments. With a low profile package style and fine pitch terminals, it offers versatility in design while maintaining reliable performance.
ATF22V10CQ-15JU
Microchip Technology
Microchip's ATF22V10CQ-15JU is a 5.5V CMOS PLD with 15ns propagation delay, featuring 22 inputs and 10 I/O lines. Ideal for industrial applications, it offers a max clock frequency of 55.5MHz and supports up to 132 product terms in a square chip carrier package.
5M570ZM100C5N
The Intel 5M570ZM100C5N is a programmable logic device (PLD) with 440 macro cells. It uses CMOS technology and has a max clock frequency of 118.3 MHz. This PLD is suitable for applications requiring in-system programmability and a wide range of I/O lines.
EPM2210F256C4N
Intel's EPM2210F256C4N is a PLD with 1700 macro cells, 204 inputs/outputs, and 9.1ns propagation delay. Ideal for applications requiring in-system programmability, such as digital signal processing and control systems due to its FLASH PLD technology and JTAG boundary scan test capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XA2C64A-8VQG44Q
FLASH PLD; Grading Of Temperature: AUTOMOTIVE; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
XA2C64A-7VQG44I
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
XA2C64A-7VQG100I
XA2C64A-7VQG100I by Xilinx is a 64 macrocell FLASH PLD with 7.5 ns propagation delay, suitable for industrial applications. It operates at a max supply voltage of 1.9 V and supports in-system programmability. With JTAG boundary scan test capability, it offers 64 I/O lines and operates within -40 to 85°C temperature range.
XA2C256-7VQG100I
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
XA2C256-8TQG144Q
FLASH PLD; Grading Of Temperature: AUTOMOTIVE; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
XA2C256-8VQG100Q
XA2C256-8VQG100Q by Xilinx is a 256 macrocell FLASH PLD with 7.5 ns propagation delay, operating at 130 MHz clock frequency. Ideal for industrial applications, it features in-system programmability and JTAG boundary scan testing, with a wide temperature range of -40 to 105 °C.
XA2C384-11TQG144Q
FLASH PLD; Grading Of Temperature: AUTOMOTIVE; Form Of Terminal: FLAT; No. of Terminals: 144; Package Code: QFF; Package Shape: SQUARE;
XA2C256-7VQG100Q
Programmable Logic Devices; Finishing Of Terminal Used: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3;
XA2C64A-8VQG100Q
FLASH PLD; Grading Of Temperature: AUTOMOTIVE; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
XA2C128-7VQG100I
XA2C128-8VQG100Q
XA2C32A-6VQG44I
XA2C128-8CPG132Q
FLASH PLD; Grading Of Temperature: AUTOMOTIVE; Form Of Terminal: BALL; No. of Terminals: 132; Package Code: TFBGA; Package Shape: SQUARE;
XA2C32A-6VQG44Q
Programmable Logic Devices; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Finishing Of Terminal Used: MATTE TIN;
XA2C256-7TQG144I
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
XA2C32A-7VQG44Q
XA2C128-7CPG132I
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 132; Package Code: TFBGA; Package Shape: SQUARE;
XA2C128-7VQG100Q
Programmable Logic Devices; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Finishing Of Terminal Used: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
XA2C384-10TQG144I
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved