Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ATF22LV10C-10JU by Microchip Technology is a 3.3/5V CMOS PLD with 10ns propagation delay, 132 product terms, and 71.4MHz max clock frequency. Ideal for PAL-type applications requiring FLASH PLDs in a square chip carrier package with 10 dedicated inputs and outputs.
Median Price
$2.000
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Microchip Technology
1+ parts
100+ parts
$1.650
1k+ parts
$1.520
10k+ parts
$1.430
DigiKey
$1.750
-
Mouser Electronics
Farnell
$2.036
$1.999
$1.973
Newark
$2.060
$1.840
$1.800
Element14
$157.760
Master Electronics
$1.780
$1.700
Verical
$2.094
$2.023
RS (Exports)
$1.892
EBV Elektronik
Avnet
Arrow
$1.779
Digiode
$1.673
Nova Conductors
$2.100
VNN
Electro Sonic
$1.830
$1.760
$1.720
IBS Electronics
$2.496
$2.412
Chip Stock
Vyrian
MISTER SPROCKETS
NAC Semi
$8.100
$7.360
EMSNET
Prism Electronics
Bristol Electronics
Zilex Electronics Inc.
Semicontronic
$1.500
$1.462
$1.455
Ampacity Inc.
Corphita
$1.585
Continental Prestige Electronics
$1.480
Corohmni
$1.836
Advanced Electronics
$2.028
Argo Parts USA
Netroflash
$1.995
$1.953
Microchip USA
$13.000
Aztec Data Supply Inc.
$118.437
Kepictronics
Lixinc
Marpe Global Electronics
A-Z Elektronik GmbH
QualityLine Systems
Authorized Procurement Solutions
Alle Elektronik GmbH
Perfect Parts
XL Components Corporation
Supply Digital
GreenTree Electronics
Eastek
Low propagation delay ensures fast processing of signals, making this product suitable for high-speed applications.
Having a high number of inputs allows for complex logic operations to be implemented, making this product versatile for various applications.
CMOS technology offers low power consumption and high noise immunity, making this product energy-efficient and reliable.
Being a FLASH PLD allows for reprogramming of logic functions, providing flexibility for design changes and updates.
High clock frequency capability enables rapid data processing, making this product suitable for tasks that require real-time performance.
Programmable Logic Devices (PLD) ATF22LV10C-10JU attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Microchip Technology
Programmable IC Type:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Product Terms:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Architecture:
Sub-Category:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Packing Method:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
ATF22LV10C-10JU Programmable ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Philips Semiconductors
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
XC95144XL-10TQG100I
Xilinx
The Xilinx XC95144XL-10TQG100I is a 144 macrocell FLASH PLD with 81 I/O lines. It operates at a max clock frequency of 138.88 MHz, has propagation delay of 10 ns, and supports JTAG boundary scan test. Ideal for industrial applications requiring high-speed programmable logic devices in compact form factors.
GAL22V10D-7LJN
Lattice Semiconductor
GAL22V10D-7LJN by Lattice Semiconductor is a 5V CMOS PLD with 7.5ns propagation delay, 132 product terms, and 111MHz clock frequency. Ideal for PAL-type applications requiring EE PLDs in commercial extended temperature range. Features include 22 inputs, 10 I/O lines, and macrocell output function in a square chip carrier package.
LCMXO2-256HC-4TG100C
LCMXO2-256HC-4TG100C by Lattice Semiconductor is a FLASH PLD with 55 inputs/outputs, 7.36 ns propagation delay, and operates at 2.375-3.462 V. Ideal for applications requiring programmable logic devices in a compact square package with gull wing terminals and low profile design.
XC2C64A-7VQG44C
XC2C64A-7VQG44C by Xilinx is a programmable logic device (PLD) with 64 macro cells. It uses CMOS technology and has a max clock frequency of 200 MHz. This PLD is commonly used for in-system programmable applications requiring high-speed processing.
5M80ZT100A5N
Altera
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: SQUARE;
EPM1270T144C4N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
XC2C384-10TQG144I
Xilinx XC2C384-10TQG144I is a 384 macrocell FLASH PLD with 118 I/O lines, 10 ns propagation delay, and 83 MHz clock frequency. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing in a compact square package.
ATF22V10CQZ-20SI
Atmel
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
EPM7064STI100-7N
Intel
Intel's EPM7064STI100-7N is a 64 macrocell EE PLD with 7.5 ns propagation delay, suitable for industrial applications. It operates at a max clock frequency of 166.7 MHz, has 68 I/O lines, and supports in-system programmability.
EPM240ZM100C7N
The Intel EPM240ZM100C7N is a 192 macrocell FLASH PLD with 80 inputs/outputs, 12 ns propagation delay, and CMOS technology. Ideal for applications requiring in-system programmability, it features a grid array package style and JTAG boundary scan test capability.
EPM570T100I5N
EPM570T100I5N by Intel is a FLASH PLD with 440 macro cells, 76 I/O lines, and 8.7 ns propagation delay. Ideal for applications requiring in-system programmability, it operates at temperatures from -40 to 100°C and has a max supply voltage of 2.625 V.
LC4256ZC-75TN100I
LC4256ZC-75TN100I by Lattice Semiconductor is a 256 macrocell EE PLD with 7.5ns propagation delay, 74 inputs, and 64 I/O lines. Ideal for applications requiring in-system programmability, it features JTAG boundary scan test support and operates at up to 111MHz clock frequency.
M4A5-64/32-12VI48
Vantis
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
LC4064V-25TN44C
LC4064V-25TN44C by Lattice Semiconductor is a 64 macrocell EE PLD with 2.5 ns propagation delay, operating at up to 250 MHz. Ideal for applications requiring fast processing speeds and high I/O capabilities in programmable logic devices. With in-system programmability and JTAG boundary scan test support, it offers flexibility for various design requirements.
EPM7064AETC44-10N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
ATF22V10C-15JU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
EPM1270GT144C4N
Intel EPM1270GT144C4N is a PLD with 980 macro cells, 116 inputs/outputs, and 8.1 ns propagation delay. Ideal for applications requiring in-system programmability, such as digital signal processing and telecommunications systems.
EPM7192SQC160-10N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 160; Package Code: QFP; Package Shape: SQUARE;
GAL16V8D-15LPNI
GAL16V8D-15LPNI by Lattice Semiconductor is a 5.5V CMOS PLD with 15ns propagation delay, ideal for industrial applications. Featuring 18 inputs, 8 dedicated inputs, and 8 I/O lines, it offers a clock frequency of up to 45.5MHz in a rectangular package with through-hole terminals.
LC4256V-5TN100C
LC4256V-5TN100C by Lattice Semiconductor is a 256 macrocell EE PLD with 74 inputs and 64 I/O lines. Featuring a propagation delay of 5 ns, it operates at a max clock frequency of 156 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in environments with temperatures ranging from 0 to 90°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATF22V10C-15PU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
ATF22V10C-15PU by Microchip Technology is a 5.5V CMOS PLD with 15ns propagation delay, ideal for PAL-type applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 55.5MHz in industrial settings. With a compact rectangular package style and through-hole terminals, it's suitable for various programmable logic tasks.
ATF22V10CQZ-20PU
ATF22V10CQZ-20PU by Microchip Technology is a 5.5V CMOS PLD with 20ns propagation delay, ideal for PAL-type applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 38.5MHz in industrial settings. With a rectangular package shape and through-hole terminals, it is designed for efficient programmable logic solutions.
ATF22V10C-10JU
ATF22V10C-10JU by Microchip Technology is a 5V CMOS PLD with 10ns propagation delay, suitable for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 90MHz. This flash PLD in a chip carrier package is ideal for PAL-type architecture designs requiring fast processing speeds.
ATF22V10C-10PU
ATF22V10C-10PU by Microchip Technology is a 5.5V CMOS PLD with 10ns propagation delay, suitable for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 90MHz and includes 132 product terms for versatile programming options. With a rectangular package shape and through-hole terminals, this flash PLD is ideal for PAL-type architecture designs requiring fast processing speeds.
ATF22V10CQZ-20SU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
ATF22V10CQZ-20SU by Microchip Technology is a 5.5V CMOS PLD with 20ns propagation delay, suitable for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a clock frequency of up to 38.5MHz in a small outline package style for efficient integration into electronic systems.
ATF22V10CQ-15JU
Microchip's ATF22V10CQ-15JU is a 5.5V CMOS PLD with 15ns propagation delay, featuring 22 inputs and 10 I/O lines. Ideal for industrial applications, it offers a max clock frequency of 55.5MHz and supports up to 132 product terms in a square chip carrier package.
ATF22V10C-7PX
FLASH PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
ATF22V10C-10XU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
ATF22V10C-10XU by Microchip Technology is a programmable logic device (PLD) with 22 inputs and 10 outputs. It has a propagation delay of 10 ns and operates at a max clock frequency of 90 MHz. This PLD is commonly used in industrial applications requiring high-speed data processing.
ATF22V10CQZ-20JU
ATF22V10CQZ-20JU by Microchip: 20ns Propagation Delay, 5.5V Max Supply Voltage, CMOS Tech. Ideal for PAL-TYPE applications with 22 inputs, 10 I/O lines, and a max clock frequency of 38.5MHz in industrial settings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved