Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 744771133 is a shielded fixed inductor with 33uH nominal inductance, suitable for power applications. It has a max rated current of 2.8A and operates b/w -40 to 125°C. The dual-ended terminal placement and ferrite core make it ideal for general purpose use in SMT packages.
Median Price
$2.260
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Newark
1+ parts
$0.344
100+ parts
1k+ parts
10k+ parts
-
Chip1Stop
$0.953
Bürklin Elektronik
$2.020
$1.640
$1.500
RS Americas
$2.210
$1.760
DigiKey
$1.759
$1.136
Mouser Electronics
$1.750
$1.180
RS (Exports)
$2.324
$1.727
Farnell
$2.440
$1.859
$1.485
$1.238
Element14
$3.280
$2.540
$2.000
Distrelec
Nova Conductors
$1.396
Chip Stock
VNN
LIBRA Elektronik GmbH
Vyrian
Halfin
Bas Electronics GmbH & Co. KG
ComSIT Distribution GmbH
ComSIT USA
Semtec, LLC
LWI Electronics Inc
Zilex Electronics Inc.
Connect4Technologies Inc.
Semi Source
Holdelec - ElecDif-Pro
Bristol Electronics
Atlantic Semiconductor
Prism Electronics
NAC Semi
Corohmni
$0.237
Aztec Data Supply Inc.
$0.665
Ampacity Inc.
$0.800
Semicontronic
$0.810
$0.790
$0.786
Argo Parts USA
$1.293
Continental Prestige Electronics
$2.080
$1.430
$0.944
BidChips
Perfect Parts
Netroflash
$1.368
$1.326
$1.298
Kepictronics
This product can be easily mounted on a surface, making it convenient for installation in various electronic devices.
The shielding helps reduce electromagnetic interference, ensuring better performance and reliability in the circuit.
Dual ended terminals allow for easy connection and flexibility in circuit design.
With a nominal inductance of 33 uH, this inductor is suitable for power applications requiring a medium level of inductance.
The high maximum rated current makes this inductor suitable for power applications that require handling higher currents.
Ferrite core material offers high magnetic permeability and low core losses, making the inductor efficient and reliable.
Fixed Inductors 744771133 attributes and parameters. Explore more Fixed Inductors devices from Wurth Elektronik
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
Reference Standard:
744771133 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
First Components International
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Bytesonic Electronics
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
XAL1010-153MED
Coilcraft
Coilcraft XAL1010-153MED is a shielded, dual-ended power inductor with 15uH nominal inductance. It has a max rated current of 13.8A and operates b/w -40 to 125°C. Ideal for general purpose applications requiring high performance and reliability in compact SMT designs.
DR73-100-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQP03TN9N1J02D
Murata Manufacturing
Murata Manufacturing's LQP03TN9N1J02D is a chip inductor with 0.0091 uH nominal inductance, 3300 MHz self-resonance frequency, and 125 °C max operating temp. Ideal for RF applications due to its small size (0201) and high quality factor of 14 at L-nom.
XAL5050-103MEC
Coilcraft XAL5050-103MEC is a shielded, dual-ended fixed inductor with 10uH nominal inductance and 4.9A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a self-resonance frequency of 15MHz.
XAL5050-103MEB
Coilcraft XAL5050-103MEB is a shielded, surface mount fixed inductor with 10uH nominal inductance and 4.9A max rated current. Ideal for power applications, it features dual-ended terminals, operates b/w -40 to 125°C, and has a self-resonance frequency of 15MHz.
DRA74-4R7-R
Eaton Corporation
DRA74-4R7-R by Eaton Corp is a shielded fixed inductor with 4.7uH nominal inductance, 165°C max operating temp, and 4.38A max rated current. Ideal for general purpose applications requiring a compact SMT package with high temperature tolerance and low DC resistance.
MLZ2012N4R7LT000
TDK
TDK's MLZ2012N4R7LT000 is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 4.7 uH and can handle a max rated current of 0.6 A. This general purpose inductor is suitable for various applications requiring high temperature resistance and low DC resistance.
LQP15MN6N8B02D
The Murata Manufacturing LQP15MN6N8B02D is a chip inductor with 0.0068 uH nominal inductance, 6000 MHz self-resonance frequency, and 1.47% tolerance. It is designed for RF applications, featuring dual-ended terminals and a compact 0402 size suitable for surface mount installations. With a max operating temperature of 85 °C, it offers high quality factor and low DC resistance for general purpose use.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
3613C100K
Meggitt Electronic Components
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; No. of Functions: 1;
PE-53116NL
Pulse Electronics
PE-53116NL by Pulse Electronics is a dual-ended fixed inductor with 167uH nominal inductance, 0.07 ohm DC resistance, and 20% tolerance. It is a general-purpose inductor suitable for applications requiring a rectangular package shape and operating temperatures ranging from -40 to 130°C at a test frequency of 0.02 MHz.
MLZ2012N6R8LT000
MLZ2012N6R8LT000 by TDK is an 0805 SMT fixed inductor with 6.8uH nominal inductance, 0.25 ohm DC resistance, and 0.55A max rated current. Ideal for general purpose applications, this shielded inductor operates b/w -55 to 125 °C and features a ferrite core material.
DFE201612E-R47M=P2
Murata Manufacturing's DFE201612E-R47M=P2 is a shielded, dual-ended fixed inductor with 0.47uH nominal inductance and 4.5A max current rating. Ideal for power applications, it operates b/w -40 to 125°C and features a compact SMT package measuring 2x1.6x1.2mm.
74438356022HT
Wuerth Elektronik & Kg
74438356022HT by Wurth Elektronik is a shielded, dual-ended fixed inductor with a nominal inductance of 2.2uH and max rated current of 4.5A. Ideal for power applications, this SMT inductor has a self-resonance frequency of 30MHz and operates b/w -55°C to 150°C.
Z-7E
Ohmite Manufacturing
Z-7E by Ohmite Manufacturing is a radial fixed inductor with 84uH nominal inductance, 1A max current, and 13MHz self-resonance freq. Ideal for RF applications due to its single-layer construction and flat terminal shape in a tubular package.
LB2012T100KR
Taiyo Yuden
LB2012T100KR by Taiyo Yuden is an 0805 fixed inductor with 10uH nominal inductance, suitable for power applications. It has a max operating temperature of 105°C and a DC resistance of 0.65 ohm, making it ideal for general purpose use at frequencies up to 32MHz. This surface mount inductor features dual-ended terminals with tin finish and nickel barrier.
N1342AAA-0001Z=P3
GENERAL PURPOSE INDUCTOR; Manufacturer Series: FSDVA;
B82791H2351N001
B82791H2351N001 by TDK is a fixed inductor with 22000 uH nominal inductance, 1.9 ohm DC resistance, and 0.35 A max rated current. Ideal for power applications, it features a rectangular package with dual in-line terminals suitable for PCB mounting. Operating temperature ranges from -40 to 125 °C.
5712
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; No. of Functions: 1;
SDE0604A-101K
Bourns SDE0604A-101K is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 10% tolerance. Ideal for power applications, it has a max rated current of 0.8A and operates b/w -40 to 125°C. Its ferrite core material ensures high performance in a compact rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
P1170.333NL
Pulse
PA4304.333NLT
7447709220
Wurth Elektronik
Wurth Elektronik 7447709220 is a shielded fixed inductor with 22uH nominal inductance, 5.3A max current, and 10MHz self-resonance freq. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C.
7447709330
744772100
GENERAL PURPOSE INDUCTOR; Inductor Application: FILTER CHOKE; No. of Terminals: 2; Package Style (Meter): Radial; Shielded: NO; Surface Mount: NO;
7447709680
7447709680 by Wurth Elektronik is a surface mount, shielded fixed inductor with a nominal inductance of 68 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 3.2 A and an operating temperature range from -40 to 125 °C.
7447709101
Wurth Elektronik 7447709101 is a shielded, dual-ended SMT inductor with 100uH nominal inductance. Ideal for power applications, it has a max rated current of 2.5A and operates b/w -40 to 125°C.
74479775210A
Wurth Elektronik's 74479775210A is an 0805 SMT fixed inductor with 1uH nominal inductance, suitable for power applications. It has a max rated current of 1.3A, DC resistance of 0.1375 ohm, and operates b/w -40 to 125°C.
7447714220
Wurth Elektronik 7447714220 is a shielded fixed inductor with 22uH nominal inductance, suitable for power applications. It has a max rated current of 3A and operates b/w -40 to 150°C. The dual-ended terminal placement and wraparound shape make it ideal for general purpose use in SMT packages.
744773047
Wurth Elektronik 744773047 is a SMT fixed inductor with 4.7uH nominal inductance, 1.82A max current, and -40 to 125°C operating temp range. Ideal for power applications due to its nickel-zinc ferrite core material and rectangular package design.
7447709470
74479777310A
Wurth Elektronik 74479777310A is an 0805 SMT fixed inductor with 10uH nominal inductance, 0.9A max current, and -40 to 125°C operating temp. Ideal for power applications due to its shielded construction and dual-ended terminals.
744770122
74479887310A
7447714101
Wurth Elektronik 7447714101 is a shielded, dual-ended power inductor with 100uH nominal inductance. It has a max rated current of 1.5A and operates b/w -40 to 150°C. Ideal for general purpose applications requiring high inductance and low DC resistance.
7447709150
Wurth Elektronik 7447709150 is a shielded fixed inductor with 15uH nominal inductance, 6.5A max current, and 17MHz self-resonance freq. Ideal for power applications due to its rectangular shape, SMT package style, and AEC-Q200 reference standard compliance.
744777910
Wurth Elektronik 744777910 is a SMT fixed inductor with 10uH nominal inductance, 2A max current, and 125°C max operating temp. Ideal for power applications, it features dual-ended terminals, ferrite core material, and AEC-Q200 reference standard compliance.
7447714330
Wurth Elektronik 7447714330 is a shielded, dual-ended power inductor with 33uH nominal inductance. It has a max rated current of 2.5A and operates b/w -40 to 150°C. Ideal for general purpose applications requiring high-frequency performance and compact size.
74477710
Wurth Elektronik 74477710 is a shielded, dual-ended SMT inductor with 10uH nominal inductance and 2A max current. Ideal for power applications, it has a self-resonance frequency of 26MHz and operates b/w -40°C to 125°C.
74479777310
744770147
Wurth Elektronik 744770147 is a shielded SMT inductor with 47uH nominal inductance, suitable for power applications. It has a max rated current of 3A, operating temperature range from -40 to 125°C, and self-resonance frequency of 7.9MHz.
7447709100
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved