Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 74479777310 is an 0805 SMT fixed inductor with 10uH nominal inductance, 0.65A max current, and -40 to 125°C operating temp. Ideal for power applications due to its shielded construction and dual-ended terminals.
Median Price
$1.180
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.170
100+ parts
$0.994
1k+ parts
$0.847
10k+ parts
$0.773
DigiKey
-
Newark
$1.350
$1.100
Farnell
$0.844
$0.754
$0.647
Element14
$1.500
$1.340
$1.130
Nova Conductors
$0.874
Sensible Micro Corp
Chip Stock
LIBRA Elektronik GmbH
Vyrian
Bristol Electronics
ComSIT Distribution GmbH
ComSIT USA
Rebound Electronics
Martec Srl
VNN
Ampacity Inc.
$0.690
Semicontronic
$0.673
$0.669
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$0.910
Continental Prestige Electronics
$0.995
$0.761
$0.686
$0.658
Kepictronics
Perfect Parts
Cyclops Electronics Ltd (Excess)
Authorized Procurement Solutions
Being surface mountable makes it easy to integrate this inductor into PCB designs, saving space and allowing for efficient assembly.
The shielding helps to protect the inductor from interference and electromagnetic noise, ensuring reliable performance in various applications.
Dual ended terminal placement provides flexibility in circuit design and makes it easier to connect the inductor in different configurations.
The inductor's performance is tested at a frequency commonly used in power electronics applications, ensuring accurate and relevant data.
With a nominal inductance of 10 uH, this inductor is suitable for various power applications that require a specific level of inductance.
The high maximum operating temperature allows this inductor to be used in demanding environments without risk of overheating or performance degradation.
The inductor can handle a maximum rated current of 0.65 A, making it suitable for power applications that require a certain level of current handling capacity.
The low DC resistance of 0.625 ohm ensures minimal power loss and efficient operation of the inductor in high frequency applications.
With a tolerance of 20%, this inductor offers consistent performance within a specified range, making it reliable for various applications.
Fixed Inductors 74479777310 attributes and parameters. Explore more Fixed Inductors devices from Wurth Elektronik
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
74479777310 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Thinking Electronic Industrial
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Sangdest Microelectronics (Nanjing)
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Yangzhou Yangjie Electronics
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PE-53116NL
Pulse Electronics
PE-53116NL by Pulse Electronics is a dual-ended fixed inductor with 167uH nominal inductance, 0.07 ohm DC resistance, and 20% tolerance. It is a general-purpose inductor suitable for applications requiring a rectangular package shape and operating temperatures ranging from -40 to 130°C at a test frequency of 0.02 MHz.
7440430022
Wuerth Elektronik & Kg
Wurth Elektronik 7440430022 is a shielded, dual-ended fixed inductor with 2.2uH nominal inductance and 30% tolerance. Ideal for power applications, it has a max rated current of 2.5A, operating temperature range from -40 to 125 °C, and self-resonance frequency of 100 MHz.
XAL6060-472MEC
Coilcraft
Coilcraft's XAL6060-472MEC is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 11A max rated current. Ideal for power applications, it operates b/w -40 to 125 °C with a self-resonance frequency of 21 MHz.
FPT705-230-R
Eaton Corporation
Eaton Corporation's FPT705-230-R is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 0.23uH, max rated current of 13A, and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and wraparound tin finish on its 4 terminals.
B82472G4104M000
TDK
The TDK B82472G4104M000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It operates b/w -55°C to 125°C, with a max rated current of 0.56A. Ideal for power applications requiring a general purpose inductor in a compact rectangular package.
XAL4020-152MEC
Coilcraft XAL4020-152MEC is a shielded, surface mount fixed inductor with 1.5uH nominal inductance and 7.5A max rated current. Ideal for power applications, it operates b/w -40 to 125°C and features a self-resonance frequency of 64MHz.
PA4334.392NLT
PA4334.392NLT by Pulse Electronics is a shielded, dual-ended power inductor with 3.9uH nominal inductance and 1A max rated current. Ideal for general purpose applications, it features a self-resonance frequency of 53MHz and operates b/w -40°C to 125°C efficiently in SMT packages.
XAL6060-103MEC
Coilcraft XAL6060-103MEC is a shielded, surface mount fixed inductor with 10uH nominal inductance and 7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 14MHz.
XAL4030-472MEB
Coilcraft XAL4030-472MEB is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 5.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C and features a self-resonance frequency of 36MHz.
SRP2512-2R2M
Bourns SRP2512-2R2M is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 20% tolerance. It has a max rated current of 2.1A and operates b/w -40 to 125°C, making it ideal for power applications requiring compact rectangular package design.
SRN3015-100M
Bourns SRN3015-100M is a shielded SMT inductor with 10uH nominal inductance, 1A max current, and 45MHz self-resonance freq. Ideal for power applications due to its compact size (3x3x1.5mm) and ferrite core material.
B82479-A1104-M
B82479-A1104-M by TDK is a surface mount fixed inductor with 100uH nominal inductance, suitable for power applications. It has a max rated current of 1.8A and operates b/w -55 to 150°C. This general purpose inductor features dual-ended terminals and wraparound shape, making it ideal for various electronic circuits.
CIGT201208EHR47MNE
Samsung Electro-mechanics
Samsung Electro-mechanics' CIGT201208EHR47MNE is a fixed inductor with dual-ended terminals, suitable for power applications. With a nominal inductance of 0.47uH and max rated current of 3.7A, it operates b/w -40 to 125°C. This general-purpose inductor features a metal composite core and wraparound terminals for efficient performance.
DRA127-151-R
Eaton Corporation's DRA127-151-R is a shielded, fixed inductor with 151.2uH nominal inductance and 1.52A max rated current. Ideal for power applications, this SMT component has dual-ended terminals and operates b/w -40°C to 165°C.
2117-H
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Nominal Inductance (L): 270 uH;
MLZ2012M3R3ATD69
MLZ2012M3R3ATD69 by TDK is an 0805 fixed inductor with 3.3uH nominal inductance, 0.2 ohm DC resistance, and 20% tolerance. Ideal for decoupling circuits, it operates b/w -55 to 125 °C with a max rated current of 0.5A. This shielded SMT inductor features dual-ended terminals and ferrite core material.
4622
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Placement: AXIAL;
SRN4018-2R2M
Bourns SRN4018-2R2M is a shielded fixed inductor with 2.2uH nominal inductance, 125°C max operating temp, and 20% tolerance. Ideal for power applications, it features dual-ended terminals, SMT package style, and ferrite core material for general purpose use.
LQG15HN4N3S02D
Murata Manufacturing
Murata Manufacturing's LQG15HN4N3S02D is a 0402-sized fixed inductor with 0.0043 uH nominal inductance, suitable for RF applications. With a max operating temperature of 125°C and self-resonance frequency of 6000 MHz, it offers high quality factor and low DC resistance at 0.15 ohm. The dual-ended terminal placement and multilayer chip construction make it ideal for general purpose inductor needs.
NRS5030T4R7MMGJV
Taiyo Yuden
Taiyo Yuden's NRS5030T4R7MMGJV is a surface mount fixed inductor with 4.7uH nominal inductance and 2.6A max rated current. Ideal for power applications, it features dual-ended terminals, ferrite core material, and operates b/w -40 to 125°C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7447709220
Wurth Elektronik
Wurth Elektronik 7447709220 is a shielded fixed inductor with 22uH nominal inductance, 5.3A max current, and 10MHz self-resonance freq. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C.
7447709330
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
744772100
GENERAL PURPOSE INDUCTOR; Inductor Application: FILTER CHOKE; No. of Terminals: 2; Package Style (Meter): Radial; Shielded: NO; Surface Mount: NO;
7447709680
7447709680 by Wurth Elektronik is a surface mount, shielded fixed inductor with a nominal inductance of 68 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 3.2 A and an operating temperature range from -40 to 125 °C.
7447709101
Wurth Elektronik 7447709101 is a shielded, dual-ended SMT inductor with 100uH nominal inductance. Ideal for power applications, it has a max rated current of 2.5A and operates b/w -40 to 125°C.
74479775210A
Wurth Elektronik's 74479775210A is an 0805 SMT fixed inductor with 1uH nominal inductance, suitable for power applications. It has a max rated current of 1.3A, DC resistance of 0.1375 ohm, and operates b/w -40 to 125°C.
7447714220
Wurth Elektronik 7447714220 is a shielded fixed inductor with 22uH nominal inductance, suitable for power applications. It has a max rated current of 3A and operates b/w -40 to 150°C. The dual-ended terminal placement and wraparound shape make it ideal for general purpose use in SMT packages.
744773047
Wurth Elektronik 744773047 is a SMT fixed inductor with 4.7uH nominal inductance, 1.82A max current, and -40 to 125°C operating temp range. Ideal for power applications due to its nickel-zinc ferrite core material and rectangular package design.
7447709470
74479777310A
Wurth Elektronik 74479777310A is an 0805 SMT fixed inductor with 10uH nominal inductance, 0.9A max current, and -40 to 125°C operating temp. Ideal for power applications due to its shielded construction and dual-ended terminals.
744770122
74479887310A
7447714101
Wurth Elektronik 7447714101 is a shielded, dual-ended power inductor with 100uH nominal inductance. It has a max rated current of 1.5A and operates b/w -40 to 150°C. Ideal for general purpose applications requiring high inductance and low DC resistance.
7447709150
Wurth Elektronik 7447709150 is a shielded fixed inductor with 15uH nominal inductance, 6.5A max current, and 17MHz self-resonance freq. Ideal for power applications due to its rectangular shape, SMT package style, and AEC-Q200 reference standard compliance.
744777910
Wurth Elektronik 744777910 is a SMT fixed inductor with 10uH nominal inductance, 2A max current, and 125°C max operating temp. Ideal for power applications, it features dual-ended terminals, ferrite core material, and AEC-Q200 reference standard compliance.
7447714330
Wurth Elektronik 7447714330 is a shielded, dual-ended power inductor with 33uH nominal inductance. It has a max rated current of 2.5A and operates b/w -40 to 150°C. Ideal for general purpose applications requiring high-frequency performance and compact size.
74477710
Wurth Elektronik 74477710 is a shielded, dual-ended SMT inductor with 10uH nominal inductance and 2A max current. Ideal for power applications, it has a self-resonance frequency of 26MHz and operates b/w -40°C to 125°C.
744770147
Wurth Elektronik 744770147 is a shielded SMT inductor with 47uH nominal inductance, suitable for power applications. It has a max rated current of 3A, operating temperature range from -40 to 125°C, and self-resonance frequency of 7.9MHz.
7447709100
74479777268
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved