Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
750311600 by Wurth Elektronik is a SMPS transformer with 2 primary windings, 12uH inductance, and TR packing. It has 2 secondary windings, L29.08xB23.11xH11.43mm dimensions, and operates b/w -40 to 125°C. Ideal for applications requiring a surface mount transformer with an output voltage of 15V and input voltage range of 30-75V.
Median Price
$8.960
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Aztec Data Supply Inc.
$1.800
Corohmni
$5.122
Semicontronic
$5.640
$5.499
$5.471
Ampacity Inc.
Advanced Electronics
$6.412
$6.091
Continental Prestige Electronics
$8.781
AZTECH Wire
$18.394
Argo Parts USA
Perfect Parts
Netroflash
$8.512
$8.333
Cyclops Electronics Ltd (Excess)
Having 2 windings on the primary side allows for flexibility in the input voltage range and provides efficient power transfer.
The inductance value of 12uH ensures smooth and stable power delivery, reducing voltage fluctuations and improving overall performance.
The TR packing method ensures secure and reliable packaging of the transformer, protecting it from external elements.
Having 2 windings on the secondary side allows for multiple output voltage options, increasing the versatility of the transformer.
With a high maximum operating temperature of 125°C, this transformer can withstand high temperature environments without compromising performance.
The 15V output voltage ensures compatibility with a wide range of devices and applications, making it a versatile choice for various electronic projects.
With a low minimum operating temperature of -40°C, this transformer can function effectively even in harsh cold conditions.
Being an SMPS transformer, it offers high efficiency and reduced size compared to traditional transformers, making it ideal for space-constrained applications.
The surface mount feature allows for easy and secure installation on PCBs, saving space and simplifying the assembly process.
SMPS Transformers 750311600 attributes and parameters. Explore more SMPS Transformers devices from Wurth Elektronik
Height:
Maximum Input Voltage (V):
Minimum Input Voltage (V):
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Packing Method:
Dimensions:
Inductance (Primary):
Sub-Category:
Transformer Type:
Width:
750311600 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Cheng-yi Electronic
Space Power Electronics
Gulf Semiconductor
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Excel (Suzhou) Semiconductor
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
FCT1-33M22SLD
Coilcraft
Coilcraft's FCT1-33M22SLD is a 25W SMPS transformer with primary inductance of 95uH. It has two secondary windings, output voltage of 3.3V, and operates b/w -40 to 85°C. Ideal for surface mount applications requiring input voltage range of 33-57V.
PA1131NLT
Pulse Electronics
PA1131NLT by Pulse Electronics is a 3W SMPS Transformer with 2 primary windings and inductance of 500uH. It has output voltages of 8V and 5V, suitable for applications requiring a max operating frequency of 200KHz. Ideal for surface mounting method in various electronic devices.
POE13P-12LD
Coilcraft's POE13P-12LD is a 13W SMPS transformer with primary inductance of 127000uH. It has two windings for both primary and secondary, outputting 12V at max frequency of 250KHz. Ideal for surface mount applications requiring high efficiency power conversion.
C1539-ALD
Coilcraft's C1539-ALD is a 100W SMPS Transformer with primary inductance of 320uH. It operates b/w -40°C to 85°C, outputting 12V. Ideal for surface mount applications requiring compact dimensions (23.37mm x 20.57mm x 9.14mm) and high power efficiency.
750316031
Wuerth Elektronik & Kg
The Wurth Elektronik 750316031 SMPS Transformer has primary inductance of 370uH, output voltage of 3.3V, and operates b/w -40°C to 125°C. It is designed for surface mount applications in various electronic devices requiring a compact transformer solution with AEC-Q200, CSA, EN, IEC, and UL approvals.
TGM-H281NFLF
Halo Electronics
TGM-H281NFLF by Halo Electronics is a 3W SMPS transformer with 2 primary and secondary windings, offering 1500V isolation voltage. Its compact dimensions of L12.07xB11.56xH8.64 (mm) make it suitable for surface mount applications requiring high isolation levels, such as in power supplies or industrial equipment. The transformer features a turns ratio of 1:1:2.6:2.6 and matte tin over nickel terminal finish for reliable performance in various electronic devices.
31620
Pico Electronics
Pico Electronics 31620 SMPS Transformer with 3W power rating, 3 primary windings, and 2 secondary windings. Ideal for applications requiring a nominal input voltage of 24V, output voltages of 10V and 5V. Suitable for surface mounting in various electronic devices.
CTX02-14659
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L10.0XB12.0XH6.2 (mm); Inductance (Primary): 547 uH; No. of Winding (Secondary): 2; No. of Winding (Primary): 1;
FA2636-ALD
Coilcraft's FA2636-ALD is a SMPS transformer with primary inductance of 160uH. It has 2 secondary windings and operates b/w -40°C to 85°C. With output voltage of 5V, it is ideal for surface mount applications in power supplies and converters.
7491196212
7491196212 by Wuerth Elektronik & Kg is a SMPS transformer with an inductance of 128 uH. It has two secondary windings and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring a 12 V output voltage.
PH0270NL
PH0270NL by Pulse Electronics is a SMPS transformer with 2 primary windings, inductance of 876uH, and 2 secondary windings. It operates b/w -40°C to 125°C, outputs at 12V, and has a max frequency of 132KHz. Ideal for applications requiring through-hole mounting such as power supplies and voltage converters.
749196111
Wurth Elektronik 749196111 is a SMPS transformer with 3 primary windings, inductance of 27.4uH, and dimensions L12.9xB9.2xH6.2 (mm). It operates b/w -40 to 125°C, has TIN SILVER COPPER terminal finish, and is surface mountable. Ideal for power supply applications requiring compact and efficient transformers.
78250JVC-R
Murata Manufacturing
Murata Manufacturing's 78250JVC-R is a SMPS transformer with dimensions of 6.35mm x 9mm x 12.7mm for surface mount applications. It offers efficient power conversion, making it ideal for compact electronic devices requiring high-performance transformers in power supplies.
PA1837NL
PA1837NL by Pulse Electronics is a SMPS transformer with 3 primary windings and inductance of 4.5uH. It operates b/w -40 to 130°C, outputs 12V, and supports input voltage range of 9-36V. Ideal for surface mount applications with dimensions L29.21xB21.84xH11.43mm and max frequency of 200KHz.
YA9034-ALD
Coilcraft's YA9034-ALD is a 6W SMPS Transformer with primary inductance of 28.8uH, suitable for applications requiring 12V output voltage. With TR packing method and surface mounting feature, it operates b/w -40 to 85°C temperature range.
750343068
Wurth Elektronik 750343068 is a SMPS Transformer with inductance of 230uH, output voltage of 24V, and max operating temp of 125°C. Ideal for power supply applications due to its through-hole mounting feature and compact dimensions (29.3mm x 29.2mm x 30.35mm).
FL2015-5LB
Coilcraft FL2015-5LB is a 6W SMPS transformer with primary inductance of 20uH. Operating at -40 to 85°C, it outputs 1600V at max input voltage of 12V. Ideal for surface mount applications up to 100 KHz frequency.
35110
SMPS TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNT; Approvals (V): MIL-PRF-27; Terminal Finish: Tin/Lead (Sn/Pb); No. of Winding (Secondary): 2; Length: 8.63 mm;
760390014
Wurth Elektronik 760390014 SMPS Transformer with 475uH primary inductance, 5V output voltage, and operating freq. range of 300-620 KHz. AEC-Q200 approved for automotive applications, UL/CUL certified for safety compliance. Ideal for surface mount PCB designs in automotive electronics requiring high efficiency power conversion.
750315371
Wurth Elektronik 750315371 is a SMPS Transformer with inductance of 72uH, output voltage of 5V, and operating temperature range from -40 to 125°C. It is used for surface mount applications in electronics requiring compact dimensions and approvals like AEC-Q200, CSA, EN, IEC, UL.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
750313638
Wurth Elektronik
Wurth Elektronik 750313638 is a SMPS Transformer with primary inductance of 340uH. It has approvals from AEC-Q200, CSA, CUL, UL and operates b/w -40 to 125°C. Ideal for applications requiring a 5V output voltage, it is a surface mount transformer with dimensions L9.14xB8.0xH7.62mm packed in TR, EMBOSSED PLASTIC packaging.
750313970
750313970 by Wurth Elektronik is a SMPS Transformer with inductance of 40uH. It has approvals from IEC and operates b/w -40 to 125°C. With output voltages of 3.3V, it is ideal for applications requiring a min input voltage of 18V and operating frequency range of 200-300 KHz.
750311607
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 29.64 mm; Maximum Operating Temperature: 125 Cel; Minimum Input Voltage (V): 30; Dimensions: L29.08XB23.11XH11.43 (mm);
750315240
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; CSA; EN; IEC; UL; No. of Winding (Secondary): 1; Width: 10.41 mm; Inductance (Primary): 440 uH;
750311599
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 8 uH; Maximum Input Voltage (V): 48; Dimensions: L29.08XB23.11XH11.43 (mm); Width: 23.11 mm;
750313995
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Output Voltage-2: 5 V; Additional Features: LENGTH AND HEIGHT DIMENSION INCLUDES TERMINALS ALSO; Minimum Input Voltage (V): 15; Length: 17.75 mm;
750342879
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; No. of Winding (Secondary): 1; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; Inductance (Primary): 200 uH;
750311608
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Dimensions: L29.08XB23.11XH11.43 (mm); Maximum Operating Temperature: 125 Cel; No. of Winding (Primary): 2;
750311308
Wurth Elektronik 750311308 is a SMPS Transformer with inductance of 100uH, output current of 0.5A, and output voltage of 24V. Ideal for power applications, it operates b/w -40 to 125°C temperatures and has dimensions L15.24xB13.34xH11.43mm for surface mounting.
750313769
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; CSA; EN; IEC; UL; Terminal Finish: TIN SILVER; Nominal Input Voltage (V): 3.3; Height: 7.62 mm;
750316033
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; CSA; EN; IEC; UL; Width: 10.41 mm; Maximum Input Voltage (V): 5.5; Dimensions: L12.32XB10.41XH11.43 (mm);
750313734
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; CSA; EN; IEC; UL; Terminal Finish: TIN SILVER; Length: 9.14 mm; Width: 8 mm;
750311692
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Length: 9.78 mm; Width: 9.14 mm; Maximum Input Voltage (V): 15;
750311307
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750311307; Terminal Finish: TIN SILVER; Output Voltage-2: 24 V; Inductance (Primary): 100 uH;
750310799
The Wurth Elektronik 750310799 is a SMPS transformer with 1 primary winding and an inductance of 25 uH. It has dimensions of L9.78XB9.14XH10.54 (mm) and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring an output voltage of 15 V, such as power supplies or electronic devices.
750310617
The Wurth Elektronik 750310617 is a SMPS transformer with 1 primary winding and an inductance of 4.5 uH. It has dimensions of L29.08XB23.11XH11.43 (mm) and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring a min input voltage of 9V and an output voltage of 12V, making it ideal for use in surface mount installations.
750311880
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN SILVER; Height: 10.54 mm; Additional Features: BREADTH AND HEIGHT DIMENSION INCLUDES TERMINALS ALSO; Maximum Operating Temperature: 125 Cel;
750311604
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Input Voltage (V): 20; Output Voltage-1: 24 V; No. of Winding (Secondary): 2; No. of Winding (Primary): 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved