Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
750315240 by Wurth Elektronik is a SMPS Transformer with 440uH primary inductance, 5V output voltage-1, and -40 to 125°C operating temperature range. Ideal for surface mount applications in automotive electronics, power supplies, and industrial equipment.
Median Price
$3.640
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$2.840
100+ parts
$2.640
1k+ parts
-
10k+ parts
Distrelec
$3.596
$2.768
DigiKey
$2.971
$2.698
$2.553
Mouser Electronics
$3.730
$2.980
$2.310
RS Americas
$4.770
$4.290
Nova Conductors
$2.300
Bristol Electronics
$4.560
$2.143
$1.961
VNN
Vyrian
Dan-Mar Components
Semtec, LLC
Aztec Data Supply Inc.
$2.060
Corohmni
$2.205
Continental Prestige Electronics
$2.254
Argo Parts USA
Netroflash
$2.185
$2.139
Ampacity Inc.
$2.370
Semicontronic
$2.311
$2.299
Allen Electronics Distributors
$3.150
$2.830
This product has met stringent approval standards which ensure high quality and reliability.
The inductance value ensures efficient power transfer and helps in regulating the output voltage effectively.
The packaging method provides protection and easy handling during storage and transportation.
The high maximum operating temperature allows for reliable performance even under demanding conditions.
The output voltage of 5V is suitable for a wide range of applications, making this product versatile.
The low minimum operating temperature ensures the product can operate in harsh environments without any issues.
The compact height makes this transformer suitable for applications where space is limited.
The slim width ensures easy integration into various electronic devices without taking up too much space.
The nominal input voltage of 5V makes this transformer compatible with standard power sources.
Being an SMPS transformer, it offers high efficiency and compact size, ideal for modern electronics.
The surface mount design simplifies installation and makes the product suitable for automated assembly processes.
The moderate length provides a good balance between compactness and ease of handling.
SMPS Transformers 750315240 attributes and parameters. Explore more SMPS Transformers devices from Wurth Elektronik
Additional Features:
Approvals (V):
Height:
Nominal Input Voltage (V):
Length:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Packing Method:
Inductance (Primary):
Transformer Type:
Width:
750315240 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Good-ark Electronics
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
EU2B-YS3203F
Idec
ROTARY SWITCH;
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Alpha & Omega Semiconductor
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Weitron Technology
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
7508112514
Wuerth Elektronik & Kg
7508112514 by Wuerth Elektronik & Kg is a SMPS transformer with primary inductance of 460uH, output voltage of 32V, and operating temperature range from -40 to 125°C. It is designed for applications requiring a min input voltage of 120V, max input voltage of 375V, and operates at frequencies b/w 68-110 KHz. Ideal for through-hole mounting in various power supply systems.
78253/55MVC-R
Murata Manufacturing
Murata Manufacturing's 78253/55MVC-R is a 1W SMPS Transformer with primary inductance of 600uH. It operates b/w -40 to 85°C, outputs 5V, and has a max frequency of 500KHz. Ideal for surface mount applications in power supplies.
HA4060-AL
Coilcraft
Coilcraft's HA4060-AL is a SMPS transformer with 2 primary windings, 300uH inductance, and 500V output voltage. Ideal for applications requiring surface mounting, it operates b/w -40 to 85°C temperatures and supports up to 100 KHz frequency.
PA1736NL
Pulse Electronics
PA1736NL by Pulse Electronics is a SMPS transformer with 3 primary windings and inductance of 20.5uH. It operates b/w -40 to 130°C, outputs 12V at max input voltage of 72V, and supports frequencies up to 200 KHz. Ideal for surface mount applications requiring compact dimensions of L29.21xB21.84xH11.43mm.
PA1366NL
PA1366NL by Pulse Electronics is a SMPS transformer with 2 primary windings and 1 secondary winding. It has an inductance of 10 uH and can operate at temperatures ranging from -40 to 130 °C. This transformer is suitable for applications requiring an output voltage of 48 V and a max operating frequency of 150 KHz.
760390012
Wurth Elektronik 760390012 is a SMPS transformer with inductance of 475uH, output voltage of 5V, and operating temperature range from -40 to 125°C. Ideal for applications requiring surface mounting feature and nominal input voltage of 5V. AEC-Q200, CUL, UL approved for quality assurance.
78253/55MVC
Murata Manufacturing's 78253/55MVC is a 1W SMPS Transformer with primary inductance of 600uH. It operates b/w -40 to 85°C, outputting 5V at a frequency of up to 500KHz. Ideal for surface mount applications requiring compact dimensions and reliable power conversion.
JA4372-ALB
Coilcraft's JA4372-ALB SMPS Transformer has 25W power rating, 75uH primary inductance, and 3.3V output voltage. Ideal for surface mount applications with operating temperatures from -40 to 125°C, it suits various power supply designs requiring a compact transformer solution.
FL2015-4LD
Coilcraft's FL2015-4LD SMPS Transformer offers 6W power rating, 44uH primary inductance, and 1600V output voltage. Ideal for surface mount applications in SMPS circuits with a max operating frequency of 100KHz.
760871135
Wurth Elektronik 760871135 SMPS Transformer with inductance of 1250 uH, operating temperature range -40 to 125 °C, and output voltages of 12V. Ideal for surface mount applications requiring compact dimensions and input voltage range of 85-265V.
78250JC
Murata Manufacturing's 78250JC is a SMPS Transformer with dimensions of 6.35mm x 9mm x 12.7mm, suitable for surface mount applications. It offers efficient power conversion in compact spaces, making it ideal for various electronic devices requiring high-performance transformers.
CTX02-14659
Cooper Industries
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L10.0XB12.0XH6.2 (mm); Inductance (Primary): 547 uH; No. of Winding (Secondary): 2; No. of Winding (Primary): 1;
DA2033-ALD
Coilcraft's DA2033-ALD is a SMPS transformer with 4 primary windings and 10uH inductance. It operates b/w -40 to 125°C, suitable for applications requiring a min input voltage of 3V and max of 24V. With dimensions L24.13xB17.4xH9.78 mm, it is designed for surface mounting in various power supply circuits.
PA5131.004NLT
PA5131.004NLT by Pulse Electronics is a 35W SMPS Transformer with primary inductance of 13uH, operating at -40 to 130°C. It has two windings for both primary and secondary outputs of 3.3V, suitable for surface mount applications in power supplies up to 200KHz frequency.
750311307
Wurth Elektronik 750311307 SMPS Transformer has 2 primary windings with 100uH inductance. It is tape & reel packed, suitable for power applications with output voltages of 24V and a max input voltage of 36V. Dimensions are 15.24mm x 13.34mm x 11.43mm, operating temperature range from -40°C to 125°C, and terminal finish is Tin Silver.
FL2015-5LB
Coilcraft FL2015-5LB is a 6W SMPS transformer with primary inductance of 20uH. Operating at -40 to 85°C, it outputs 1600V at max input voltage of 12V. Ideal for surface mount applications up to 100 KHz frequency.
B0358-CLD
Coilcraft's B0358-CLD SMPS Transformer offers 2uH primary inductance, operates b/w -40°C to 85°C, and comes in L23.37xB20.57xH9.14 mm dimensions. Ideal for surface mount applications in power supplies and converters due to its compact size and high-quality construction.
FA2636-ALB
Coilcraft's FA2636-ALB is a SMPS transformer with primary inductance of 160uH. It has 2 secondary windings and operates b/w -40°C to 85°C. With output voltage of 5V, it is ideal for surface mount applications in power supplies and converters.
CTX02-15835
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: CTX02-15835; Width: 14.4 mm; Dimensions: L14.1XB14.4XH10.6 (mm); No. of Winding (Primary): 2;
PLA51LA32
Vishay Intertechnology
Vishay Intertechnology's PLA51LA32 is a 2000W SMPS Transformer with primary inductance of 128uH. Ideal for applications requiring output voltage of 30V, it operates b/w -55°C to 125°C. With dimensions of 22x53x70mm, it is designed for chassis mounting and supports frequencies up to 100KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
750313638
Wurth Elektronik
Wurth Elektronik 750313638 is a SMPS Transformer with primary inductance of 340uH. It has approvals from AEC-Q200, CSA, CUL, UL and operates b/w -40 to 125°C. Ideal for applications requiring a 5V output voltage, it is a surface mount transformer with dimensions L9.14xB8.0xH7.62mm packed in TR, EMBOSSED PLASTIC packaging.
750313970
750313970 by Wurth Elektronik is a SMPS Transformer with inductance of 40uH. It has approvals from IEC and operates b/w -40 to 125°C. With output voltages of 3.3V, it is ideal for applications requiring a min input voltage of 18V and operating frequency range of 200-300 KHz.
750311600
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 11.43 mm; Dimensions: L29.08XB23.11XH11.43 (mm); Inductance (Primary): 12 uH; No. of Winding (Primary): 2;
750311607
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 29.64 mm; Maximum Operating Temperature: 125 Cel; Minimum Input Voltage (V): 30; Dimensions: L29.08XB23.11XH11.43 (mm);
750315371
Wurth Elektronik 750315371 is a SMPS Transformer with inductance of 72uH, output voltage of 5V, and operating temperature range from -40 to 125°C. It is used for surface mount applications in electronics requiring compact dimensions and approvals like AEC-Q200, CSA, EN, IEC, UL.
750311599
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 8 uH; Maximum Input Voltage (V): 48; Dimensions: L29.08XB23.11XH11.43 (mm); Width: 23.11 mm;
750313995
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Output Voltage-2: 5 V; Additional Features: LENGTH AND HEIGHT DIMENSION INCLUDES TERMINALS ALSO; Minimum Input Voltage (V): 15; Length: 17.75 mm;
750342879
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; No. of Winding (Secondary): 1; Packing Method: TR, EMBOSSED PLASTIC, 13 INCH; Inductance (Primary): 200 uH;
750311608
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Dimensions: L29.08XB23.11XH11.43 (mm); Maximum Operating Temperature: 125 Cel; No. of Winding (Primary): 2;
750311308
Wurth Elektronik 750311308 is a SMPS Transformer with inductance of 100uH, output current of 0.5A, and output voltage of 24V. Ideal for power applications, it operates b/w -40 to 125°C temperatures and has dimensions L15.24xB13.34xH11.43mm for surface mounting.
750313769
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; CSA; EN; IEC; UL; Terminal Finish: TIN SILVER; Nominal Input Voltage (V): 3.3; Height: 7.62 mm;
750316033
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; CSA; EN; IEC; UL; Width: 10.41 mm; Maximum Input Voltage (V): 5.5; Dimensions: L12.32XB10.41XH11.43 (mm);
750343068
Wurth Elektronik 750343068 is a SMPS Transformer with inductance of 230uH, output voltage of 24V, and max operating temp of 125°C. Ideal for power supply applications due to its through-hole mounting feature and compact dimensions (29.3mm x 29.2mm x 30.35mm).
750313734
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; CSA; EN; IEC; UL; Terminal Finish: TIN SILVER; Length: 9.14 mm; Width: 8 mm;
750311692
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Length: 9.78 mm; Width: 9.14 mm; Maximum Input Voltage (V): 15;
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 750311307; Terminal Finish: TIN SILVER; Output Voltage-2: 24 V; Inductance (Primary): 100 uH;
750310799
The Wurth Elektronik 750310799 is a SMPS transformer with 1 primary winding and an inductance of 25 uH. It has dimensions of L9.78XB9.14XH10.54 (mm) and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring an output voltage of 15 V, such as power supplies or electronic devices.
750310617
The Wurth Elektronik 750310617 is a SMPS transformer with 1 primary winding and an inductance of 4.5 uH. It has dimensions of L29.08XB23.11XH11.43 (mm) and can operate at temperatures ranging from -40 to 125 °C. This transformer is suitable for applications requiring a min input voltage of 9V and an output voltage of 12V, making it ideal for use in surface mount installations.
750311880
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN SILVER; Height: 10.54 mm; Additional Features: BREADTH AND HEIGHT DIMENSION INCLUDES TERMINALS ALSO; Maximum Operating Temperature: 125 Cel;
750315227
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): AEC-Q200; CSA; EN; IEC; UL; Width: 6.73 mm; Height: 4.19 mm; Maximum Operating Temperature: 125 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved