Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 7448262013 Data Line Filter has UL approval, rated voltage of 250V, and inductance of 1300uH. With dimensions L43.5xB23.5xH43.0 (mm), it is ideal for applications requiring a max operating temperature of 125°C and min of -40°C, rated current up to 20A.
Median Price
$22.160
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$16.700
100+ parts
-
1k+ parts
10k+ parts
Bürklin Elektronik
$20.610
$16.090
$13.990
DigiKey
$21.050
$16.473
Mouser Electronics
$16.550
Element14
$22.240
$17.350
Farnell
$23.031
$18.368
Newark
$26.760
$22.850
$20.870
Nova Conductors
$16.892
Vyrian
VNN
Chip Stock
LIBRA Elektronik GmbH
Ampacity Inc.
$14.190
Semicontronic
$13.835
$13.764
AZTECH Wire
$16.328
Advanced Electronics
$16.711
Netroflash
$16.048
$15.710
Aztec Data Supply Inc.
$16.990
Corohmni
$17.335
Continental Prestige Electronics
$20.250
$13.840
Perfect Parts
Argo Parts USA
This product is UL approved, ensuring it meets rigorous safety standards.
With two functions, this data line filter provides enhanced filtering capabilities.
The rated voltage of 250V makes this filter suitable for a wide range of applications.
Being a data line filter, this product is specifically designed to reduce noise on data lines.
With a high maximum operating temperature, this filter can withstand demanding environments.
The low minimum operating temperature allows for reliable performance in cold conditions.
The high inductance of 1300 uH helps in effectively filtering out unwanted noise.
The compact width of 23.5mm makes this filter suitable for applications with space constraints.
With a low DC resistance, this filter minimizes power loss and ensures efficient operation.
The length of 43.5mm provides a good balance between performance and space-saving design.
The through-hole mounting type offers easy and secure installation.
These dimensions make this filter versatile and adaptable to various setups.
With a high rated current of 20A, this filter can handle heavy loads effectively.
The height of 43mm ensures compatibility with standard mounting configurations.
Data Line Filters 7448262013 attributes and parameters. Explore more Data Line Filters devices from Wurth Elektronik
Approvals (V):
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Length:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
7448262013 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Microsemi
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
1N4148WS
Tak Cheong Electronics Holdings
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
Surge Components
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
744231091
Wuerth Elektronik & Kg
Wurth Elektronik 744231091 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has 4 terminals, tin finish, and dimensions of L2.0xB1.2xH1.2 (mm). Ideal for applications requiring filtering in data lines with a current rating of 0.37A.
NFM21CC102R1H3D
Murata Manufacturing
Murata Manufacturing's NFM21CC102R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and FEED THROUGH CAPACITOR type. It operates b/w -55 to 125 °C and has dimensions of L2.0XB1.25XH0.85 mm. Ideal for applications requiring high capacitance filtering at 1A current rating.
ACP3225-102-2P-T
Epcos Ag
DATA LINE FILTER; Maximum DC Resistance: .05 ohm; Rated Current: 1.5 A; No. of Functions: 2; Maximum Operating Temperature: 85 Cel; Height: 1.9 mm;
BNX025H01L
Murata Manufacturing's BNX025H01L is a 25V DATA LINE FILTER with 50 Ohm output impedance. AEC-Q200 compliant, it operates b/w -55°C to 125°C. Ideal for automotive applications due to its high insulation resistance and 15A rated current capacity.
BLM21BD471SN1D
Murata's BLM21BD471SN1D is an 0805 chip bead filter with 470 OHM output impedance, 0.35 ohm DC resistance, and 100 MHz frequency range. Ideal for data line filtering applications due to its compact size (L2.0XB1.25XH0.85 mm) and surface mounting type.
HR2220V801R-10
Laird Technologies
HR2220V801R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers an output impedance of 800 OHM, rated current of 8 A, and DC resistance of 0.01 ohm. Ideal for surface mount applications in filtering frequencies from 25 MHz to 1000 MHz.
LI0805G301R-10
Steward
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .7 A; No. of Functions: 1; Terminal Finish: Tin (Sn); Output Impedance (ohm): 300 OHM;
NFM18PC104R1C3D
Murata Manufacturing's NFM18PC104R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 100000 uF capacitance. It is a feed through capacitor used in applications requiring filtering of electrical signals.
FBMJ2125HM330-T
Taiyo Yuden
Taiyo Yuden's FBMJ2125HM330-T is an 0805 chip bead filter with 2 terminals. It operates b/w -40 to 85°C, offering a DC resistance of 0.008 ohm and output impedance of 33Ω at a frequency range of 100 MHz. Ideal for data line filtering applications, it has dimensions of L2.0xB1.25xH0.85 mm and can handle a rated current of 4A in surface mount installations.
744823220
Wurth Elektronik 744823220 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 20000uH. It operates b/w -40 to 125 °C and has dimensions of L23.0xB13.0xH28.0 mm. Ideal for applications requiring noise suppression in data lines at a max current of 1.5A.
BLM18BB600SN1D
BLM18BB600SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
DLW5BSM302SQ2L
Murata Manufacturing DLW5BSM302SQ2L is a Data Line Filter with 2 functions, rated at 50V and 0.5A. It offers high insulation resistance of 10 Mohm, suitable for applications requiring filtering in data lines with operating temperatures from -40 to 85°C.
FBMH3216HM221NTV
Taiyo Yuden's FBMH3216HM221NTV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 220 ohm and operates b/w -40°C to 125°C. Ideal for surface mount applications requiring effective noise filtering in compact spaces.
MMZ2012Y202B
TDK
The TDK MMZ2012Y202B is a chip bead data line filter with FERRITE CHIP technology. It has 2 terminals, matte tin finish, and dimensions of L2.0xB1.25xH0.85 (mm). With a max operating temperature of 125°C and rated current of 0.4A, it is ideal for surface mount applications requiring an output impedance of 2000 ohm.
LI0805H151R-10
LI0805H151R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a max frequency of 1000 MHz and output impedance of 150 OHM. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.8 A and is designed for frequencies ranging from 25 MHz to 1000 MHz.
FBMH3216HM221NT
FBMH3216HM221NT by Taiyo Yuden is a chip bead data line filter with dimensions of 3.2x1.6x1.6mm, suitable for surface mount applications. It offers an output impedance of 220Ω, rated current of 4A, and operates b/w -40°C to 125°C. Ideal for noise suppression in circuits with frequencies ranging from 100MHz and DC resistance of 0.02Ω.
742792021
742792021 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with dimensions of L2.0XB1.2XH0.9 (mm). It has a Max Operating Temperature of 125°C and Min Frequency of 100 MHz, suitable for surface mount applications in electronic circuits requiring noise suppression and signal filtering up to 1000 MHz.
BK2125HM102-T
BK2125HM102-T by Taiyo Yuden is a chip bead data line filter with 400V rated voltage, -55 to 125°C operating temperature range, and 1000 ohm output impedance. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100MHz.
744273801
Wurth Elektronik 744273801 is a Data Line Filter with 2 functions, rated at 80V. It has an inductance of 9uH and operates b/w -40 to 125°C. Ideal for applications requiring filtering of data lines, it offers low DC resistance of 0.011 ohm and output impedance of 800 OHM.
PCMF1USB3SZ
Nexperia
The Nexperia PCMF1USB3SZ is a 5V data line filter with 5 terminals, IEC approval, and -40 to 85°C operating temperature range. It has a compact size of L1.22xB0.82xH0.6 mm and capacitance of 0.25uF. Ideal for applications requiring noise filtering in USB data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
744822301
Wurth Elektronik
Wurth Elektronik 744822301 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 1000uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.035 ohm, and rated current of 3A. Ideal for applications requiring noise suppression in data lines.
744822222
Wurth Elektronik 744822222 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 2200uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.07 ohm. Ideal for applications requiring noise suppression in data lines.
7448225007
7448225007 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has 2 functions, 4 terminals, and an inductance of 700uH. This panel mount filter is UL approved and commonly used for filtering data lines in electronic applications.
7448261418
DATA LINE FILTER; Maximum DC Resistance: .0079 ohm; Rated Current: 14 A; Inductance: 1800 uH; Dimensions: L43.0XB23.5XH43.0 (mm)/L1.693XB0.925XH1.693 (inch); Approvals (V): UL;
7448263505
7448263505 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 500uH, making it suitable for applications requiring high current filtering and protection against electromagnetic interference.
744822120
The Wurth Elektronik 744822120 Data Line Filter has a rated voltage of 250V, inductance of 20000uH, and max operating temperature of 125°C. It is UL approved with 2 functions and suitable for applications requiring noise suppression in data lines.
744822233
DATA LINE FILTER; Maximum DC Resistance: .12 ohm; Rated Current: 1.5 A; Mounting Type: THROUGH HOLE MOUNT; No. of Functions: 2; Inductance: 3300 uH;
7448229004
7448229004 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 350uH, making it suitable for applications requiring noise suppression in data lines.
DATA LINE FILTER; Maximum DC Resistance: .27 ohm; Rated Current: 1.5 A; No. of Terminals: 4; Mounting Type: THROUGH HOLE MOUNT; Inductance: 20000 uH;
744824101
DATA LINE FILTER; Maximum DC Resistance: .007 ohm; Rated Current: 10 A; Terminal Finish: TIN COPPER; Inductance: 1000 uH; Length: 27.5 mm;
744825433
DATA LINE FILTER; Maximum DC Resistance: .21 ohm; Rated Current: 3 A; Inductance: 33000 uH; Rated Voltage: 250 V; Length: 30 mm;
744821120
DATA LINE FILTER; Maximum DC Resistance: 1 ohm; Rated Current: .5 A; Width (mm): 7.5; Maximum Operating Temperature: 125 Cel; Approvals (V): UL;
744823305
Wurth Elektronik 744823305 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 5000uH. It operates b/w -40 to 125 °C and has dimensions of L23.0XB17.0XH28.0 (mm). Ideal for applications requiring noise suppression in data lines at a max current of 2.5A.
7448262510
DATA LINE FILTER; Maximum DC Resistance: .0036 ohm; Rated Current: 25 A; Maximum Operating Temperature: 125 Cel; Height: 43 mm; Minimum Operating Temperature: -40 Cel;
744823333
DATA LINE FILTER; Maximum DC Resistance: .06 ohm; Rated Current: 2.5 A; Width (mm): 13.0; Maximum Operating Temperature: 125 Cel; Inductance: 3300 uH;
744825320
DATA LINE FILTER; Maximum DC Resistance: .16 ohm; Rated Current: 3 A; Dimensions: L30.0XB18.6XH35.0 (mm)/L1.181XB0.732XH1.378 (inch); No. of Functions: 2; Inductance: 20000 uH;
744842311
The Wurth Elektronik 744842311 is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and four terminals, making it suitable for applications requiring noise filtering in data lines.
744821150
DATA LINE FILTER; Maximum DC Resistance: .2 ohm; Rated Current: 1 A; Width (mm): 7.5; Inductance: 5000 uH; JESD-609 Code: e2;
744823210
Wuerth Elektronik & Kg 744823210 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 10000uH. It operates b/w -40 to 125 °C and has dimensions of L23.0xB13.0xH28.0 (mm). Ideal for applications requiring noise suppression in data lines at a max current of 2A.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved