Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
150080VS75000 by Wurth Elektronik is a single color LED with a peak wavelength of 572nm, ideal for applications requiring bright green light. With a size of 1.4mm and max forward current of 0.03A, it offers a viewing angle of 140° and nominal luminous intensity of 40.0mcd, suitable for surface mount configurations in various electronic devices.
Median Price
$0.168
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$0.163
100+ parts
$0.140
1k+ parts
$0.121
10k+ parts
-
DigiKey
$0.190
$0.151
$0.147
Mouser Electronics
Element14
$0.215
$0.193
Newark
$0.161
$0.154
Farnell
$0.142
RS (Exports)
Nova Conductors
$0.138
Chip Stock
Semtec, LLC
Vyrian
Sensible Micro Corp
LIBRA Elektronik GmbH
Bristol Electronics
VNN
Martec Srl
Semicontronic
$0.118
$0.117
Ampacity Inc.
Argo Parts USA
$0.137
$0.133
Netroflash
$0.135
Modulus Dynamics
$0.153
$0.152
Advanced Electronics
$0.417
$0.379
$0.342
Aztec Data Supply Inc.
$0.680
Kepictronics
Perfect Parts
Continental Prestige Electronics
$0.120
$0.112
Robosynatics
$8.372
Lucentia Tech
This product being a single LED configuration allows for easy integration into a variety of electronic applications.
The compact size of this LED makes it ideal for designs where space is limited.
With a high maximum forward current, this LED can provide bright illumination without overheating.
The peak wavelength of 572 nm results in a bright green color output.
The water clear lens ensures a clean and focused light output.
This LED is specifically designed for single color applications, ensuring consistent and reliable performance.
With only two terminals, this LED is easy to install and connect.
The high maximum operating temperature allows for use in a wide range of environments.
The low height of this LED makes it suitable for applications with limited vertical space.
The rectangular shape of this LED provides a wide and even light dispersion.
The low minimum operating temperature makes this LED suitable for use in cold environments.
The bright green color output adds a vibrant touch to any project.
This packing method ensures safe transportation and storage of the LEDs.
The wide terminal pitch facilitates easy soldering and connection.
The wide viewing angle allows for excellent visibility from various angles.
With a high nominal luminous intensity, this LED provides strong illumination.
The surface mount option simplifies the installation process and allows for a neat and secure fit.
Visible LEDs 150080VS75000 attributes and parameters. Explore more Visible LEDs devices from Wurth Elektronik
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
150080VS75000 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIC
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Transys Electronics
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
KP-1608SGC
Kingbright Electronic
KP-1608SGC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring SUPER BRIGHT GREEN illumination, it has a viewing angle of 120° and operates b/w -40 to 85 °C temperatures.
XHP35B-H0-0000-0D0HC450G
Wolfspeed
SINGLE COLOR LED;
LTST-C193KRKT-5A
Lite-on Technology
LTST-C193KRKT-5A by Lite-on Technology is a single color LED with peak wavelength of 639nm and max forward current of 0.02A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices. With a viewing angle of 130° and water clear lens type, it offers high luminous intensity at 26.05mcd.
LLN9-WW-XXX
Dialight
The Dialight LLN9-WW-XXX is a complex LED array with 9 functions, warm white color, and surface mount feature. Ideal for lighting applications in bulk packaging, this single-color LED array has 4 terminals and a round shape.
CMD6722SRUGCTR8
Chicago Miniature Lighting
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 40.0/25.0; Lens Type: CLEAR; Configuration: SEPARATE, 2 ELEMENTS;
597-7703-607F
Dialight's 597-7703-607F is a dual-color LED with peak wavelengths of 639nm and 574nm. Featuring a water-clear lens, it has a viewing angle of 130° and nominal luminous intensity of 55/45 mcd. Ideal for surface mount applications, this LED has separate elements for red and green light emission, making it suitable for status indicators in various electronic devices.
150141YS73100
Wuerth Elektronik & Kg
150141YS73100 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 592nm, forward current of 0.03A, and luminous intensity of 300.0mcd. Ideal for applications requiring a single color LED with surface mounting feature and 120° viewing angle.
SML-522MU8WT86
ROHM
ROHM's SML-522MU8WT86 is a 1.3mm dual-color LED with separate elements, featuring max forward current of 0.02A and nominal luminous intensity of 63.0/40.0 mcd. Ideal for surface mount applications in visible LED category, it emits red/yellow-green light with milky white lens, suitable for temperatures ranging from -40 to 85°C.
IN-S63AT5UW
Inolux
Inolux IN-S63AT5UW is a 1.2mm white LED with 900.0mcd luminous intensity, 0.025A forward current, and 120° viewing angle. Ideal for surface mount applications in electronics due to its diffused lens and rectangular shape. Operating temperature range from -40°C to 85°C makes it versatile for various lighting needs.
VLMG1300-GS08
Vishay Intertechnology
VLMG1300-GS08 by Vishay Intertechnology is a single color LED with a peak wavelength of 574nm. It has a max forward current of 0.03A and a min luminous intensity of 0.018cd. This LED is suitable for applications requiring yellow-green light emission, such as display panels or indicator lights.
598-8070-107F
Dialight's 598-8070-107F is a single color LED with water clear lens, 1.1mm size, and 0.025A max forward current. Ideal for surface mount applications, it has a viewing angle of 140° and nominal luminous intensity of 20.0 mcd.
LWP4SG-V2AB-JKPL-1
Osram Opto Semiconductors
Osram Opto Semiconductors' LWP4SG-V2AB-JKPL-1 is a 1.6mm single color LED with diffused lens, emitting white light at 1350.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 100°C, making it ideal for surface mount applications requiring high luminous output in a compact size.
QS123XXHG220
Apem Components
Visible LEDs;
569-0107-777F
Dialight's 569-0107-777F is a 3mm orange LED array with 4 separate elements. It has a peak wavelength of 600nm, forward current of 0.025A, and luminous intensity of 7.0mcd. Ideal for applications requiring radial mounting and a viewing angle of 60° in bulk packaging.
SML-LX1206SYC-TR
Lumex
SML-LX1206SYC-TR by Lumex is a 2mm single color LED with peak wavelength of 590nm, forward current of 0.03A, and luminous intensity of 70.0mcd. Ideal for surface mount applications requiring super yellow light output in a compact form factor.
551-1307-004F
Dialight's 551-1307-004F is a 3mm single color LED array with 4 separate elements. It has a peak wavelength of 565nm, max forward current of 0.007A, and max forward voltage of 2.5V. Ideal for applications requiring green light emission in a radial mount configuration.
HSME-C170
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMG-C190
Broadcom
HSMG-C190 by Broadcom is a 1mm single color LED with peak wavelength of 570nm. It has a max forward current of 0.02A and viewing angle of 170°. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
KPT-1608SURCK
KPT-1608SURCK by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with HYPER RED color, peak wavelength of 650nm, and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 120° and nominal luminous intensity of 220.0mcd.
3011
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4; Shape: ROUND; Viewing Angle: 90 deg;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
150060RS75000
Wurth Elektronik
150060RS75000 by Wurth Elektronik is a single color LED with peak wavelength of 630nm and forward current of 0.03A. With water clear lens, it has a viewing angle of 140° and nominal luminous intensity of 250.0mcd. Ideal for surface mount applications in various electronic devices due to its compact size and red color output.
150080RS75000
150080RS75000 by Wurth Elektronik is a single color LED with a peak wavelength of 630nm and max forward current of 0.03A. With a viewing angle of 140°, it's ideal for applications requiring red light emission in compact spaces. This surface mount LED operates b/w -40 to 85 °C, making it versatile for various lighting projects.
150060VS75000
150060VS75000 by Wurth Elektronik is a single color LED with peak wavelength of 572nm and viewing angle of 140°. Ideal for applications requiring bright green light, it has a max forward current of 0.03A and operates b/w -40°C to 85°C. Suitable for surface mount installations in various electronic devices.
150060GS75000
150060GS75000 by Wurth Elektronik is a single color LED with peak wavelength of 515nm and viewing angle of 140°. With a size of 1.1mm, it has a max forward current of 0.03A making it ideal for surface mount applications in electronics requiring green light emission.
150080GS75000
150080GS75000 by Wurth Elektronik is a 1.4mm SINGLE COLOR LED with peak wavelength of 515nm, suitable for visible applications. It has a max forward current of 0.03A and viewing angle of 140°, making it ideal for surface mount installations in various electronic devices. Operating temperature ranges from -40°C to 85°C, offering versatility in different environments.
150060VS55040
150080YS75000
150080YS75000 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 595nm, forward current of 0.03A, and luminous intensity of 120.0mcd. Ideal for surface mount applications in electronics, providing a viewing angle of 140° for efficient illumination in compact spaces.
150060BS55040
150060BS55040 by Wurth Elektronik is a 1mm blue LED with a peak wavelength of 465nm. It has a max forward current of 0.02A and operates b/w -40°C to 85°C. Ideal for applications requiring a single color LED with diffused lens, such as indicator lights in electronic devices.
150060GS55040
150060GS55040 by Wurth Elektronik is a single color LED with a peak wavelength of 520nm and a viewing angle of 140°. With a size of 1mm, it has a max forward current of 0.02A and operates b/w -40°C to 85°C. Ideal for applications requiring green light emission in compact spaces.
150060YS73220
150060VS73220
150060BS73220
150060BS75000
150060BS75000 by Wurth Elektronik is a SINGLE COLOR LED with a peak wavelength of 465nm and max forward current of 0.03A. With a viewing angle of 140°, it's ideal for applications requiring blue light in compact spaces like surface mount PCB designs.
150080SS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
150080BS75000
150080BS75000 by Wurth Elektronik is a WATER CLEAR BLUE LED with a peak wavelength of 465nm and viewing angle of 140°. It has a size of 1.4mm, operates at temperatures from -40 to 85 °C, and has a max forward current of 0.03A. Ideal for surface mount applications requiring single color illumination.
150060YS75000
150060YS75000 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 595nm and viewing angle of 140°. It has a size of 1.1mm, operates b/w -40 to 85 °C, and is ideal for surface mount applications requiring a single color light source.
150060RS55040
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.0; Lens Type: DIFFUSED; Minimum Luminous Intensity: .03 cd;
150044M155260
150060SS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved