Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
150080BS75000 by Wurth Elektronik is a WATER CLEAR BLUE LED with a peak wavelength of 465nm and viewing angle of 140°. It has a size of 1.4mm, operates at temperatures from -40 to 85 °C, and has a max forward current of 0.03A. Ideal for surface mount applications requiring single color illumination.
Median Price
$0.176
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$0.163
100+ parts
$0.140
1k+ parts
$0.121
10k+ parts
-
DigiKey
$0.190
$0.151
$0.147
Mouser Electronics
$0.138
Newark
$0.209
$0.170
$0.157
RS (Exports)
$0.114
$0.104
Farnell
$0.129
$0.110
Nova Conductors
Chip Stock
Vyrian
VNN
Sensible Micro Corp
ComSIT Distribution GmbH
Semtec, LLC
Bristol Electronics
Atlantic Semiconductor
Aztec Data Supply Inc.
$0.050
Ampacity Inc.
$0.097
Semicontronic
$0.095
$0.094
Argo Parts USA
$0.137
$0.133
Continental Prestige Electronics
$0.181
$0.106
$0.100
Advanced Electronics
$0.458
$0.435
Corohmni
$0.533
Perfect Parts
Infinite Electronics LLP (Excess)
iodParts Technologies Inc.
Robosynatics
Lucentia Tech
Netroflash
$0.135
$0.131
$0.128
Single configuration simplifies the design and makes it easy to integrate into applications.
Compact size allows for versatility in placement and saves space in the design.
Low maximum forward current helps in energy efficiency and minimizes heat dissipation.
Peak wavelength of 465nm makes it suitable for applications requiring blue light emission.
Water clear lens ensures efficient light transmission and brightness.
Single color LED provides consistent and uniform illumination.
Two terminals simplify the connection process and increase reliability.
High maximum operating temperature allows for use in various environments without issues.
Low height profile enables easy integration into slim designs and compact spaces.
Rectangular shape offers directional lighting and easy alignment in applications.
Low minimum operating temperature ensures performance even in cold conditions.
Blue color LED adds a distinct visual appeal to the product and diversifies application options.
TR packing method ensures safe and efficient handling during transportation and storage.
Terminal pitch of 2.1mm facilitates easy mounting and connection in various setups.
Wide viewing angle of 140° provides broad coverage and visibility.
High luminous intensity ensures bright and illuminating output for the LED.
Surface mount capability allows for easy installation on PCBs and compact designs.
Visible LEDs 150080BS75000 attributes and parameters. Explore more Visible LEDs devices from Wurth Elektronik
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
150080BS75000 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
261
Deltrol Controls
Other Relays;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
KP-1608SRC-PRV
Kingbright Electronic
KP-1608SRC-PRV by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with a peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
UHD1110-FKA-CL1A13R3Q1BBQFMF3
Wolfspeed
UHD1110-FKA-CL1A13R3Q1BBQFMF3 by Wolfspeed is a COMMON ANODE TRIPLE COLOR LED with 4 terminals. It has a Max Forward Current of 0.01 A and Max Operating Temperature of 85°C. Ideal for applications requiring RGB color output in compact spaces.
598-8191-107F
Dialight
Dialight's 598-8191-107F is a single color LED with water clear lens, emitting blue light. It has a size of 1.2mm and max forward current of 0.025A. Ideal for surface mount applications, with viewing angle of 140° and nominal luminous intensity of 140mcd.
SSL-LXA3025IGC-TR
Lumex
SSL-LXA3025IGC-TR by Lumex is a 2.8mm DUAL COLOR LED with 1 function, peak wavelengths of 635/565nm, and clear lens. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C. With red/green colors and a viewing angle of 130°, it offers luminous intensity of 12.0/20.0mcd for versatile lighting solutions.
150141RV73100
Wuerth Elektronik & Kg
150141RV73100 by Wurth Elektronik is a dual-color LED with separate 2 elements, peak wavelengths of 630nm and 572nm, and a viewing angle of 120°. Ideal for surface mount applications in electronics, this LED has a compact size of 2.4mm and water-clear lens type. Operating temperatures range from -40°C to 85°C.
HDSP-4850
Agilent Technologies
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 20; Nominal Luminous Intensity (mcd): 1.9; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Size: 5.08 mm;
SMLP36RGB2W3R
ROHM
ROHM's SMLP36RGB2W3R is a 1.5mm TRIPLE COLOR LED with SEPARATE, 3 ELEMENTS configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for surface mount applications requiring red, green, and blue light outputs in compact electronic devices.
LGL29K-F2J1-24
Osram Opto Semiconductors
Osram Opto Semiconductors' LGL29K-F2J1-24 is a 1.3mm single color LED with peak wavelength of 572nm and max forward current of 0.02A. Ideal for applications requiring green light, it has a viewing angle of 160° and nominal luminous intensity of 3.5mcd, suitable for surface mount installations in various electronic devices.
LGR971-LM
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.6; Lens Type: COLORLESS DIFFUSED; Terminal Finish: Tin (Sn);
LSR976-NR-1
LSR976-NR-1 by Osram Opto Semiconductors is a 1.3mm single color LED with peak wavelength of 645nm. It has a max forward current of 0.025A and viewing angle of 160°, making it ideal for applications requiring high luminous intensity in super red light, such as automotive lighting and signage displays.
LYR976-PS-36
Osram Opto Semiconductors' LYR976-PS-36 is a single color LED with peak wavelength of 591nm, ideal for amber light applications. With a max forward current of 0.025A and viewing angle of 160°, it offers high luminous intensity at 162.5mcd for surface mount installations.
APT1608ZGCK
Kingbright Electronic's APT1608ZGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm, max forward current of 0.025A, and luminous intensity of 350mcd. Ideal for surface mount applications in electronics, offering water clear lens and green light emission with wide 120° viewing angle.
KA-4040SRCGKS-R
KA-4040SRCGKS-R by Kingbright Electronic is a 2.4mm dual-color LED with peak wavelengths of 655nm/574nm and a max forward current of 0.03A. Ideal for applications requiring super bright red/green illumination, this surface-mount LED has a viewing angle of 120° and nominal luminous intensity of 200.0/90.0 mcd, making it suitable for various optoelectronic projects.
HSMF-C113
Broadcom
HSMF-C113 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/570/468 nm. With a size of 2.1 mm and max forward current of 0.02 A, it's ideal for surface mount applications requiring red/green/blue illumination at a viewing angle of 120°.
591-3001-013F
Dialight's 591-3001-013F is a dual color LED with peak wavelengths of 635nm and 572nm. It has a max forward current of 0.03A, nominal luminous intensity of 6.5/8.0 mcd, and operates in temperatures ranging from -40 to 100°C. Ideal for surface mount applications requiring separate red and green elements with a viewing angle of 40°.
SML-LXR44SRC-TR
SML-LXR44SRC-TR by Lumex is a 2.4mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring a clear lens SUPER RED light source, such as indicator lights in electronic devices due to its surface mounting feature and 90° viewing angle.
APT1608QBC/D
Kingbright Electronic's APT1608QBC/D is a 1.2mm BLUE LED with 0.03A current, 468nm peak wavelength, and 100.0mcd luminous intensity. Ideal for surface mount applications in electronics, displays, and indicator lights due to its water clear lens and 120° viewing angle.
Infineon Technologies
LGR971-LM LED by Infineon has a peak wavelength of 586nm, forward voltage of 2.5V, and max forward current of 0.025A. With a diffused lens and green color at wavelength, it's ideal for applications requiring a viewing angle of 160° in environments ranging from -30°C to 85°C.
OVSRRGBCC3TM
Tt Electronics Plc
OVSRRGBCC3TM by Tt Electronics Plc is a 2mm TRIPLE COLOR LED with COMMON ANODE configuration. It has a max forward current of 0.02A and diffused white lens type. Ideal for applications requiring red, green, and blue color outputs with a viewing angle of 150°.
597-2001-213F
Dialight's 597-2001-213F is a single color LED with peak wavelength of 643nm and forward voltage of 2.6V. Ideal for surface mount applications, it offers a viewing angle of 120° and luminous intensity of 50.0mcd, making it suitable for indicators and signage in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
150060RS75000
Wurth Elektronik
150060RS75000 by Wurth Elektronik is a single color LED with peak wavelength of 630nm and forward current of 0.03A. With water clear lens, it has a viewing angle of 140° and nominal luminous intensity of 250.0mcd. Ideal for surface mount applications in various electronic devices due to its compact size and red color output.
150080RS75000
150080RS75000 by Wurth Elektronik is a single color LED with a peak wavelength of 630nm and max forward current of 0.03A. With a viewing angle of 140°, it's ideal for applications requiring red light emission in compact spaces. This surface mount LED operates b/w -40 to 85 °C, making it versatile for various lighting projects.
150060VS75000
150060VS75000 by Wurth Elektronik is a single color LED with peak wavelength of 572nm and viewing angle of 140°. Ideal for applications requiring bright green light, it has a max forward current of 0.03A and operates b/w -40°C to 85°C. Suitable for surface mount installations in various electronic devices.
150060GS75000
150060GS75000 by Wurth Elektronik is a single color LED with peak wavelength of 515nm and viewing angle of 140°. With a size of 1.1mm, it has a max forward current of 0.03A making it ideal for surface mount applications in electronics requiring green light emission.
150080GS75000
150080GS75000 by Wurth Elektronik is a 1.4mm SINGLE COLOR LED with peak wavelength of 515nm, suitable for visible applications. It has a max forward current of 0.03A and viewing angle of 140°, making it ideal for surface mount installations in various electronic devices. Operating temperature ranges from -40°C to 85°C, offering versatility in different environments.
150060VS55040
SINGLE COLOR LED;
150080VS75000
150080VS75000 by Wurth Elektronik is a single color LED with a peak wavelength of 572nm, ideal for applications requiring bright green light. With a size of 1.4mm and max forward current of 0.03A, it offers a viewing angle of 140° and nominal luminous intensity of 40.0mcd, suitable for surface mount configurations in various electronic devices.
150080YS75000
150080YS75000 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 595nm, forward current of 0.03A, and luminous intensity of 120.0mcd. Ideal for surface mount applications in electronics, providing a viewing angle of 140° for efficient illumination in compact spaces.
150060BS55040
150060BS55040 by Wurth Elektronik is a 1mm blue LED with a peak wavelength of 465nm. It has a max forward current of 0.02A and operates b/w -40°C to 85°C. Ideal for applications requiring a single color LED with diffused lens, such as indicator lights in electronic devices.
150060GS55040
150060GS55040 by Wurth Elektronik is a single color LED with a peak wavelength of 520nm and a viewing angle of 140°. With a size of 1mm, it has a max forward current of 0.02A and operates b/w -40°C to 85°C. Ideal for applications requiring green light emission in compact spaces.
150060YS73220
150060VS73220
150060BS73220
150060BS75000
150060BS75000 by Wurth Elektronik is a SINGLE COLOR LED with a peak wavelength of 465nm and max forward current of 0.03A. With a viewing angle of 140°, it's ideal for applications requiring blue light in compact spaces like surface mount PCB designs.
150080SS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
150060YS75000
150060YS75000 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 595nm and viewing angle of 140°. It has a size of 1.1mm, operates b/w -40 to 85 °C, and is ideal for surface mount applications requiring a single color light source.
150060RS55040
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.0; Lens Type: DIFFUSED; Minimum Luminous Intensity: .03 cd;
150044M155260
Visible LEDs;
150060SS75000
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved