Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Digital I/P Module;
Median Price
$213.520
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
$175.266
1k+ parts
-
10k+ parts
Assy Fe
Other Function Interface ICs 750-1416 attributes and parameters. Explore more Other Function Interface ICs devices from Wago
Interface IC Type:
750-1416 Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Data and energy flows are part of the infrastructure of the digital world. WAGO products ensure the long-term viability of this connectivity. We have always considered ourselves a reliable partner to the industry and are aware of the great responsibility we have as a leading supplier in the field of connection and automation technology. We face this challenge with passion and dedication and understand it as part of our entrepreneurial vision and mission.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SPC TECHNOLOGY/ MULTICOMP
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148WS
Promax-johnton
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
ADUM5402ARWZ-RL
Analog Devices
ADUM5402ARWZ-RL by Analog Devices is a 16-terminal interface IC with a supply voltage range of 3V to 5.5V, operating temperature from -40°C to 105°C. It is designed for industrial applications requiring small outline package style and dual terminal position for surface mount assembly.
FXLP34P5X
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
PM8805TR
STMicroelectronics
PM8805TR by STMicroelectronics is a 43-terminal interface IC in a square chip carrier package. With a compact size of 8x8mm and max seated height of 1mm, it's ideal for applications requiring a small footprint. This IC is designed for surface mount assembly, making it suitable for various electronic devices.
ISO7761QDWQ1
ISO7761QDWQ1 by Texas Instruments is a CMOS digital isolator with 6 channels, AEC-Q100 screening for automotive use. It operates b/w -40 to 125 °C with a supply voltage range of 2.25-5.5 V, in a small outline package suitable for surface mount applications.
ISO7762FDWR
ISO7762FDWR by Texas Instruments is a small outline interface IC with 6 functions and 16 terminals. It operates at temperatures ranging from -55 to 125 °C and has a max supply voltage of 5.5 V. It is commonly used in military applications due to its CMOS technology and gull wing terminal form.
ISO7140FCCDBQR
ISO7140FCCDBQR by Texas Instruments is a 16-terminal IC with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 2.7-5 V and is ideal for automotive applications due to its small size, surface mount capability, and interface circuit functionality.
ISO7720FQDRQ1
ISO7720FQDRQ1 by Texas Instruments is a digital isolator with 2 channels, operating at -40 to 125 °C. It has a supply voltage range of 2.25-5.5 V and AEC-Q100 screening for automotive applications. The IC comes in an 8-terminal small outline package with gull wing terminals, suitable for surface mount assembly.
ADUM6401ARWZ
ADUM6401ARWZ by Analog Devices is a 16-terminal digital isolator with a supply voltage range of 3-5.5V and operating temperature from -40 to 105°C. It features a small outline package style, matte tin terminal finish, and gull wing form factor. Ideal for applications requiring high voltage isolation in compact electronic designs.
ISO7721D
ISO7721D by Texas Instruments is a dual-function interface IC with 2 channels. It operates b/w -55 to 125 °C and supports supply voltage from 2.25V to 5.5V. With a small outline package style, it's ideal for military-grade applications requiring CMOS technology and Gull Wing terminal form.
ISO7763DBQ
ISO7763DBQ by Texas Instruments is a 16-terminal IC with 6 functions, operating b/w -55 to 125°C. With a supply voltage range of 2.25-5.5V, it's ideal for military-grade applications requiring interface circuitry in compact spaces. The CMOS technology and dual-terminal position make it versatile for various electronic systems.
ISO7742FQDBQQ1
ISO7742FQDBQQ1 by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -40 to 125°C. It features a supply voltage range of 2.25-5.5V and is AEC-Q100 compliant for automotive applications. The interface circuit has a small outline package style, Gull Wing terminals, and CMOS technology suitable for various automotive electronics systems.
FXMA2102L8X
FXMA2102L8X by Onsemi is a surface mount interface IC with 8 terminals, operating at supply voltages of 1.65V to 5.5V. With a package style of CHIP CARRIER and very thin profile, it is ideal for industrial applications requiring an interface circuit in tight spaces. This IC can withstand temperatures from -40°C to 85°C, making it suitable for various industrial environments.
SI8662BB-B-IS1
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 1;
LTC4331HUFD#PBF
LTC4331HUFD#PBF by Analog Devices is an EIA-485 interface IC with a supply voltage range of 3V to 5.5V, operating from -40°C to 125°C. It comes in a rectangular chip carrier package with 20 terminals and matte tin finish, suitable for automotive applications requiring reliable communication over long distances.
ADUM4165BRIZ
ADUM4165BRIZ by Analog Devices is a 20-terminal interface IC with CMOS technology. It operates b/w -55 to 125 °C, with supply voltage range of 3-3.6 V. This small outline package is ideal for various applications requiring surface mount technology and dual terminal position.
TFDU4101-TR3
Vishay Intertechnology's TFDU4101-TR3 is an 8-terminal interface IC with a supply voltage range of 2.4V to 5.5V, ideal for applications requiring CMOS technology and operating temperatures from -30°C to 85°C. With a compact rectangular package style and matte tin terminal finish, it offers precise functionality in various electronic devices.
ISO7041DBQR
The Texas Instruments ISO7041DBQR is a CMOS interface IC with 4 functions, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 1.71V to 5.5V. This small outline package has 16 terminals and nickel palladium gold finish for robust performance in various electronic systems.
SI8641ED-B-ISR
Silicon Labs
SI8641ED-B-ISR by Silicon Labs is a 16-terminal digital isolator with 4 functions, operating b/w -40 to 125°C. It has a supply voltage range of 2.375V to 5.5V and uses CMOS technology. Ideal for applications requiring surface-mount small outline packages in various electronic systems.
ZIOL2401BI1W
Renesas Electronics
ZIOL2401BI1W by Renesas Electronics is a 24-terminal interface IC with a supply voltage range of 8-36V. It features a square package shape, industrial temperature grade, and quad terminal position. Ideal for applications requiring high reliability in harsh environments such as industrial automation and automotive electronics.
ISO7741QDBQQ1
ISO7741QDBQQ1 by Texas Instruments is a 4-channel interface IC with CMOS technology. It operates b/w -40 to 125 °C and has a supply voltage range of 2.25-5.5 V, making it ideal for automotive applications requiring AEC-Q100 screening. The small outline package with dual terminals and nickel/palladium/gold finish ensures reliability in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Wago
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved