Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's NTCALUG02A103F161A is a 10000 ohm NTC thermistor with thermal sensitivity index of 3984 K. Ideal for temperature sensing applications, it has radial terminal placement and chassis mount package style. Operating range from -55 to 125 °C, with tolerance of 1%.
Median Price
$2.020
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Newark
1+ parts
$0.969
100+ parts
1k+ parts
10k+ parts
Farnell
$1.810
$1.310
$1.190
-
Mouser Electronics
$1.670
$1.510
$1.360
DigiKey
$2.270
$1.666
$1.474
$1.369
Element14
$3.049
$1.789
$1.618
$1.312
Nova Conductors
$1.428
Vyrian
Corohmni
$0.110
Aztec Data Supply Inc.
$0.340
Argo Parts USA
Semicontronic
$2.480
$2.418
$2.406
Continental Prestige Electronics
$2.580
$1.340
$1.040
Microchip USA
$18.980
$18.860
$18.800
$18.750
Authorized Procurement Solutions
This product is specifically designed for temperature sensing applications, ensuring accurate and reliable measurements.
Radial terminal placement makes it easy to connect the thermistor in a circuit, providing a convenient and secure mounting option.
Bulk packaging is cost-effective and suitable for stocking large quantities of the product, making it ideal for high-volume production.
The specified resistance value of 10000 ohms is standard for many temperature sensing applications, offering compatibility with various circuits.
Chassis mount package style provides a secure and stable mounting option for the thermistor in electronic devices or systems.
With a maximum operating temperature of 125°C, this thermistor can withstand high-temperature environments without compromising performance.
The 1% tolerance ensures that the resistance value of the thermistor is within a close range of the specified value, improving accuracy in temperature measurements.
Compliance with industry standards such as AEC-Q200, CUL, and UL ensures the quality and reliability of the thermistor for use in various applications.
Non-linear Resistors NTCALUG02A103F161A attributes and parameters. Explore more Non-linear Resistors devices from Vishay Intertechnology
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
NTCALUG02A103F161A Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Assembly/Origin - NTCALUG Series Supplier 09/Nov/2022
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Components
Won-top Electronics
Continental Device India
Bkc Semiconductors
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
4554
Jw Miller Magnetics
Other Semiconductors;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
First Components International
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
EU2B-YS3203C
Idec
ROTARY SWITCH;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6TR
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
RUEF135-2
TE Connectivity
TE Connectivity's RUEF135-2 is a PTC resettable fuse with resistance of 0.13 ohm and rated power dissipation of 0.8W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. With radial terminal placement and rectangular package shape, it offers reliable protection at rated AC voltage of 30V.
RUEF250U-0.148
TE Connectivity's RUEF250U-0.148 is a PTC thermistor with 2 radial terminals, rated for 30V AC voltage. It is used for overload protection applications due to its rectangular package shape and tin terminal finish. Ideal for through-hole mounting, it offers reliable non-linear resistance properties.
B59451C1130B070
TDK
The TDK B59451C1130B070 is a PTC thermistor with 56 ohm resistance and 440V operating voltage. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With AEC-Q200 reference standard, it offers -40 to 125 °C operating temperature range.
RUEF250S
TE Connectivity's RUEF250S is a PTC resettable fuse with resistance of 0.07 ohm and rated power dissipation of 1.2W. Ideal for temperature sensing applications, it features radial terminal placement and dimensions of 11.4mm x 3mm x 17.5mm, operating at a max temperature of 85°C.
RF1347-000
Littelfuse
PTC RESETTABLE FUSE;
590-33AA33-503
Honeywell Sensing And Control
590-33AA33-503 by Honeywell is a NTC thermistor with resistance of 50k ohm and tolerance of 0.2%. It is used for temperature sensing applications, featuring radial terminal placement and flexible wire terminals. With a thermal sensitivity index of 4261 K, it operates b/w -60 to 125 °C.
RGEF600
TE Connectivity's RGEF600 is a PTC resettable fuse with resistance of 0.028 ohm and rated power dissipation of 2.8W. Ideal for temperature sensing applications, it features radial terminal placement in a rectangular package. With CSA, TUV, and UL certifications, it operates b/w -40°C to 85°C.
1206L200PR
1206L200PR by Littelfuse is a PTC resettable fuse with resistance of 0.018 ohm, operating voltage of 6V, and max temp of 85°C. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style.
1206L010/60WR
Littelfuse 1206L010/60WR is a PTC resettable fuse with resistance of 1.5 ohm and operating voltage of 60V. It features dual-ended terminals, SMT package style, and matte tin finish. Ideal for overcurrent protection applications with temperature range from -40 to 85°C.
NTCS0603E3103HMT
Vishay Intertechnology
Vishay Intertechnology's NTCS0603E3103HMT is a NTC thermistor with 10000 ohm resistance, 3% tolerance, and 3610 K thermal sensitivity index. It is used for temperature sensing applications in automotive electronics due to its -40 to 150 °C operating range and AEC-Q200, CUL, UL certifications. The SMT package with dual-ended terminals makes it suitable for surface mount installations.
B72580E0250K062
Epcos Ag
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .015 W; No. of Terminals: 2; Maximum Circuit DC Voltage: 31 V; Maximum Energy Absorbing Capacity: 3.7 J;
MINISMDC030F-2
MINISMDC030F-2 by TE Connectivity is a PTC resettable fuse with operating voltage of 30V. It has dual-ended terminals, rectangular SMT package, and operates b/w -40°C to 85°C. Ideal for temperature sensing applications, it meets CSA, TUV, and UL standards.
0ZCJ0050AF2E
Bel Fuse
Bel Fuse's 0ZCJ0050AF2E is a PTC resettable fuse with resistance of 0.15 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for automotive applications due to AEC-Q200 compliance and compact SMT package measuring 3.5mm x 1.8mm x 1.2mm. Operating temperature range from -40°C to 85°C ensures reliable performance in various conditions.
B59850C0120A070
B59850C0120A070 by TDK is a PTC thermistor with 10 ohm resistance and rated AC voltage of 230V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. Operating temperature ranges from -40 to 125 °C.
RXEF020-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: 1.83-2.75 OHMS AT 20 DEG CEL; Rated AC Voltage (URac): 72 V; JESD-609 Code: e3;
NTCS0805E3103GMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .21 W; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %;
RXEF185-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; Additional Features: 0.08-0.12 OHMS AT 20 DEG CEL; JESD-609 Code: e3;
RF2628-000
TE Connectivity's RF2628-000 is a PTC resettable fuse with 1.25 ohm resistance and rated power dissipation of 0.45W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating temperatures range from -40 to 85°C, suitable for through-hole mounting with a max AC voltage of 72V.
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .89 mm; Operating Voltage: 30 V;
MINISMDC050F-2
MINISMDC050F-2 by TE Connectivity is a PTC thermistor with 1 ohm resistance, operating voltage of 24V, and dual terminal placement. It is used for overload protection in various applications due to its compact rectangular package design and surface mounting type. Operating temperature ranges from -40°C to 85°C making it suitable for UL, CSA, TUV reference standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTCALUG02A103F
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; No. of Terminals: 2;
NTCALUG01A103F161A
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Thermal Sensitivity Index: 3984 K;
NTCALUG01T103G501A
Vishay Intertechnology's NTCALUG01T103G501A is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and 2% tolerance. Ideal for temperature sensing applications, it has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Packaged in chassis mount style, it meets AEC-Q200, CUL, and UL standards.
NTCALUG02A103G
Vishay Intertechnology's NTCALUG02A103G is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and disk package shape. It has a thermal sensitivity index of 3984 K and operates b/w -55 to 125 °C. Ideal for temperature sensing applications, it features tin terminal finish and chassis mount packaging.
NTCALUG01A103F
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Height (Package): 15.7 mm;
NTCALUG02A103FLA
Vishay Intertechnology's NTCALUG02A103FLA is a non-linear resistor with a resistance of 10000 ohm and a thermal sensitivity index of 3435 K. It is used for temperature sensing applications, with a max operating temperature of 125 °C and a min operating temperature of -55 °C.
NTCALUG01A103F161
Vishay Intertechnology's NTCALUG01A103F161 is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, it features radial terminal placement and tin finish, suitable for chassis mount installations.
NTCALUG01T103G501
Vishay Intertechnology's NTCALUG01T103G501 is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and chassis mount package. It has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, meeting AEC-Q200, CUL, and UL standards.
NTCALUG02A103FL
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Length (Package): 8.5 mm;
NTCALUG01T103GA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %; Reference Standard: AEC-Q200; CUL, UL;
NTCALUG01T103FLA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; No. of Terminals: 2;
NTCALUG02A103FA
Vishay Intertechnology's NTCALUG02A103FA is a non-linear resistor with a resistance of 10000 ohm and a tolerance of 1%. It is used for temperature sensing applications, with a max operating temperature of 125 °C and a min operating temperature of -55 °C.
NTCALUG01A103F161L
Vishay Intertechnology NTCALUG01A103F161L is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3435 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, featuring radial terminal placement and chassis mount package style.
NTCALUG01T103G201A
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %; Thermal Sensitivity Index: 3984 K;
NTCALUG01A103FA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Terminal Placement: RADIAL;
NTCALUG01A103FLA
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Package Style (Meter): Chassis Mount;
NTCALUG03A103GC
Vishay Intertechnology's NTCALUG03A103GC is a non-linear resistor with a resistance of 10000 ohm and a tolerance of 2%. It is used for temperature sensing applications, with a max operating temperature of 125 °C and a min operating temperature of -40 °C.
NTCALUG01A103F800A
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Width (Package): 5.6 mm;
NTCALUG02A103F161
NTC THERMISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Width (Package): 4.3 mm;
NTCALUG02A103F161L
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved