Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: COPPER ALLOY; Insulator Material: GLASS FILLED POLYETHYLENE/POLYESTER; Termination Type: SOLDER;
Median Price
$3.455
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.837
100+ parts
$0.826
1k+ parts
$0.802
10k+ parts
$0.706
Farnell
$2.180
$1.940
$1.560
-
Misumi USA
$2.790
Conrad
$4.120
$3.685
DigiKey
$4.230
$3.491
$2.722
$2.595
Mouser Electronics
$3.350
$2.720
$2.470
Newark
$4.530
$4.240
Element14
$4.580
Arrow
$2.125
$1.864
Master Electronics
$6.840
$6.820
$2.320
Verical
$2.760
$2.610
Powell Electronics
$2.770
$2.630
Digiode
$0.211
Vyrian
$0.222
Rapid Electronics
$2.839
IBS Electronics
$4.329
Ashlea Components Ltd
VNN
TME
$4.090
R&J Components
Nova Conductors
Ampacity Inc.
$0.189
Corphita
$0.200
Continental Prestige Electronics
$2.170
$1.620
$1.370
Perfect Parts
Assy Fe
Argo Parts USA
Cyclops Electronics Ltd (Excess)
Authorized Procurement Solutions
Netroflash
GreenTree Electronics
EMSNET (Excess)
Power Connectors 1-178316-2 attributes and parameters. Explore more Power Connectors devices from Tyco Electronics Amp
Additional Features:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
1-178316-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1N4148WS
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
Crimson Semiconductor
1-770174-1
TE Connectivity
TE Connectivity's 1-770174-1 is a rectangular power connector with 4 contacts, rated at 600V and 9.5A. Featuring POLYAMIDE insulation material, it has a durability of 500 cycles and operates b/w -55 to 105°C. Ideal for board mounting applications requiring reliable male contact pins in commercial settings.
43045-1219
Molex
Molex 43045-1219 is a rectangular power connector with insulation resistance of 1Gohm, dielectric voltage of 1000VAC, and operating temp range from -40 to 105°C. It features a male contact gender, surface mount termination type, and is suitable for board mounting applications in commercial settings.
428192212
Molex 428192212 power connector features 50A signal current, 2200VAC dielectric voltage, and -40 to 105°C operating temperature. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
1720420201
RECTANGULAR POWER CONNECTOR; Contact Material: COPPER ALLOY; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN;
1723104104
Molex 1723104104 Power Connector features Liquid Crystal Polymer insulator, -40 to 105°C operating temp range, and UL 94V-0 flammability rating. With male SQ pin-skt contacts, it is ideal for board mounting applications requiring a 4-contact connector.
36792-1201
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 36792; Contact Material: NOT SPECIFIED;
39-30-1042
Molex 39-30-1042 is a rectangular power connector with 4 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
IPD1-02-D-K-M
Samtec
Samtec's IPD1-02-D-K-M is a rectangular power connector with 4 contacts, 0.505" body depth, and POLYAMIDE66 insulator. Ideal for cable mounting applications, featuring crimp termination and female SQ PIN-SKT contact style.
2002411127
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1376389-1
TE Connectivity's 1376389-1 is a rectangular power connector with insulator material GLASS FILLED POLYAMIDE66. Featuring a rated current of 10A, it has an insulation resistance of 500MΩ and operates b/w -30 to 105°C. Ideal for cable mounting applications, this female connector offers durability with 25 cycles.
1723163108
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
178289-6
TE Connectivity's 178289-6 is a rectangular power connector with glass-filled polyester insulator. It has 12 contacts, operates b/w -55 to 105°C, and meets UL standards. Suitable for cable mounting applications at 115/230VAC mains connector rating, featuring female crimp terminals in black color.
640445-6
TE Connectivity's 640445-6 is a rectangular power connector with 6 contacts, rated at 7A. Featuring a mating contact pitch of 0.156", it has an insulation resistance of 5Gohm and operates b/w -55 to 105°C. Ideal for board mounting applications, this connector has a durable design with polarization key for secure connections.
DF22-3P-7.92DS(53)
Hirose Electric
POWER CONNECTOR;
10-84-5041
Molex 10-84-5041 is a rectangular power connector with 4 contacts, 6.35mm terminal pitch, and 138u plating thickness. It has an insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting in commercial applications requiring high durability and reliability.
15-06-0140
Molex 15-06-0140 is a RECTANGULAR POWER CONNECTOR with 14 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It has a temperature range of -40 to 105°C and features SOLDER termination for PANEL mounting. Ideal for commercial applications requiring high insulation resistance and reliable female contact arrangement.
50-84-2010
The Molex 50-84-2010 is a rectangular power connector with a mating contact pitch of 0.25". It features an insulation resistance of 1G ohm, dielectric voltage of 5000VAC, and can handle temperatures from -55 to 105°C. Ideal for commercial applications requiring a durable, crimp termination type connector with a rated current of 13.5A.
44441-2006
The Molex 44441-2006 is a rectangular power connector with a mating contact pitch of 0.295 inches. It has a body length of 1.803 inches and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in commercial applications for power connections requiring crimp termination and polarization key housing.
66484-001
Dupont Electronics
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; Insulator Material: POLYAMIDE; Additional Features: COMPATIBLE CONTACTS: 76146-001; 76146-003; 76148-001; 76148-003; 76150-001;
03-09-2092
The Molex 03-09-2092 is a rectangular power connector with a mating contact pitch of 0.198 inches. It has a body length of 0.77 inch and width of 0.73 inch, making it suitable for cable mounting applications. With a max operating temperature of 105°C and UL flammability code of 94V-2, it offers reliable performance in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-178139-2
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
1-178316-3
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Total No. of Contacts: 6;
Tyco Electronics Amp
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Insulator Material: GLASS FILLED POLYETHYLENE/POLYESTER; Filter Feature: NO;
1-178288-5
TE Connectivity 1-178288-5 is a RECTANGULAR POWER CONNECTOR with 5 contacts, GLASS FILLED POLYESTER insulator, and operating temp range of -55 to 105°C. Ideal for power applications requiring high insulation resistance and UL94V-0 flammability rating.
1-178314-5
TE Connectivity 1-178314-5 is a rectangular power connector with 4 contacts, rated at 15A. It features a body size of 1.001" x 0.368" x 0.85", insulator made of glass-filled polyester, and solderable retention clips for board mounting. Ideal for commercial applications requiring a polarized, UL-certified connector with a temperature range of -55 to 105°C.
1-178802-5
TE Connectivity 1-178802-5 is a rectangular power connector with 5 contacts, made of glass-filled polyester. It has a body length of 1.85", width of 0.5", and depth of 1.323". Operating temperature ranges from -55°C to 105°C, suitable for commercial applications requiring high insulation resistance and UL flammability rating.
1-178288-6
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Pitch (mm): 3.81;
1-178288-7
1-178294-5
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Insulator Color: BLACK; Rated Current - Signal: 8 A;
1-178317-5
TE Connectivity's 1-178317-5 is a rectangular power connector with a mating contact pitch of 0.15 inches. It has a body length of 1.601 inches and a body width of 0.368 inches, making it suitable for board mounting applications. With an operating temperature range from -55 to 105°C, this connector can handle a rated current of 15A and is UL certified with a flammability code of 94V-0.
1-178288-3
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Filter Feature: NO;
1-178315-5
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Shell Material: GLASS FILLED POLYETHYLENE POLYESTER;
1-178216-2
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; IEC Conformity: NO; Insulator Color: BLACK;
1-178141-2
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: 1-178288-3; Mixed Contacts: NO; Filter Feature: NO;
1-178313-3
TE Connectivity 1-178313-3 is a rectangular power connector with insulator resistance of 100MΩ. It has a rated current of 12A and operates b/w -55 to 105°C. Ideal for board mounting applications, featuring solderable retention clips and polyester insulation material.
1-178802-3
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Shell Material: NYLON;
1-178293-3
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; MIL Conformity: NO;
1-178129-6
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Plating Thickness (inch): 15u;
1-178313-2
TE Connectivity 1-178313-2 is a rectangular power connector with 3 contacts, rated at 12A. Insulation resistance of 100MΩ and operating temperature range from -55 to 105°C make it ideal for commercial applications. Featuring solderable retention clips, this male connector has a durable shell made of polyester.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved