Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %; Height (Package): 9.53 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Variable Resistors 68WR100AP attributes and parameters. Explore more Variable Resistors devices from Tt Electronics Plc
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
68WR100AP Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
EEAGA1H4R7
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
Daco Semiconductor
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
PTB6053-2010BPA203
Bourns
PTB6053-2010BPA203 by Bourns is a vertical carbon variable resistor with a resistance of 20000 ohm. It is commonly used in audio applications and has a max operating temperature of 60°C.
3006P-7-203LF
The Bourns 3006P-7-203LF is a linear trimmer pot with 20000 ohm resistance, rated for 0.75W power dissipation. It has a max operating temperature of 125°C and can handle up to 400V. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
TC33X-2-104E
Bourns TC33X-2-104E is a linear trimmer resistor with 100k ohm resistance, 25% tolerance, and 0.15W power dissipation. It operates b/w -40 to 100°C, suitable for applications requiring precise resistance adjustments in compact SMT designs at up to 50V voltage.
157S103MXB10
Vishay Intertechnology
Vishay Intertechnology's 157S103MXB10 is a 10000 ohm POTENTIOMETER with 20% tolerance and 1 W power dissipation. Constructed with CONDUCTIVE PLASTIC technology, it has a temperature coefficient of 600 ppm/°C and operates b/w -55 to 125 °C. Ideal for servo mount applications, this panel mount resistor offers a wide angle of rotation at 340° in a compact package size of 11.56 mm length and 22.2 mm diameter from the MODEL 157 series.
RK09L1140A66
Alps Electric
POTENTIOMETER; Resistance: 10000 ohm; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %; Size Code: 4845; Minimum Operating Temperature: -10 Cel;
3386P-1-101LF
Bourns 3386P-1-101LF is a linear trimmer resistor with 100 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its 85°C to 125°C operating range and low temperature coefficient of 100 ppm/°C.
3361S-1-502G
Bourns 3361S-1-502G is a CERMET variable resistor with 5000 ohm resistance, linear law, and 10% tolerance. It is a surface mount trimmer used in applications requiring precise resistance adjustments at temperatures ranging from -55 to 125 °C, with an operating voltage of 300 V.
3312J-1-502E
Bourns 3312J-1-502E is a CERMET trimmer resistor with 5000 ohm resistance, 20% tolerance, and 255° rotation angle. It is used in applications requiring precise voltage adjustments in compact SMT packages. Operating temperature ranges from -55 to 125 °C.
3299Y-1-501
Bourns 3299Y-1-501 is a CERMET trimmer pot with 500 ohm resistance, 25 turns, and linear resistance law. It has a rated power dissipation of 0.5 W and operates at temperatures from -55 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments.
3296W-1-100LF
Bourns 3296W-1-100LF is a 10 ohm, 25-turn linear cermet trimmer resistor with a tolerance of 10%. It operates at temperatures ranging from -55 to 125 °C and has a max voltage of 300 V. Ideal for applications requiring precise resistance adjustments in through-hole mounting configurations.
3296Z-1-501LF
Bourns 3296Z-1-501LF is a CERMET multi-turn trimmer resistor with 500 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3266X-1-502LF
Bourns 3266X-1-502LF is a CERMET variable resistor with 12 turns, 5000 ohm resistance, and linear law. It operates b/w -55 to 150 °C and has a tolerance of 10%. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300 V.
RHS5K0E
Ohmite Manufacturing
Ohmite Manufacturing's RHS5K0E is a 5000 ohm linear wire wound potentiometer with 3 lug terminals. It features a 25W power dissipation rating, 10% tolerance, and 300° rotation angle. Ideal for panel mount applications requiring precise resistance adjustments in circuits.
14821F0GJSX13103KA
Vishay Intertechnology's 14821F0GJSX13103KA is a linear conductive plastic trimmer pot with 10000 ohm resistance, 3 terminals, and 10% tolerance. It operates b/w -40 to 125 °C and has a power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
3314J-1-201E
Bourns 3314J-1-201E is a CERMET variable resistor with 200 ohm resistance, linear law, and 20% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for applications requiring precise voltage adjustments in compact SMT designs.
RV4NAYSD102A
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; No. of Turns: 1;
92R1A-R22-B13L
Bourns 92R1A-R22-B13L is a 5000 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 1W and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a compact rectangular package.
3296X-1-102LF
Bourns 3296X-1-102LF is a CERMET variable resistor with 1000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a power dissipation of 0.5 W. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3329W-1-503LF
Bourns 3329W-1-503LF is a CERMET trimmer resistor with 50000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mounting applications for adjusting voltage levels with a linear law of resistance. Operating temperature ranges from -55 to 150 °C.
P0915N-FC15BR10K
P0915N-FC15BR10K by Tt Electronics Plc is a linear conductive plastic potentiometer with 10000 ohm resistance, 20% tolerance, and 300° angle of rotation. It is used in applications requiring precise voltage control, such as audio equipment and industrial machinery. The rectangular package with PCB mount style makes it suitable for panel mounting in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved