Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Configuration: SINGLE; Minimum Operating Temperature: -25 Cel; Minimum Collector-emitter Breakdown Voltage: 55 V;
Median Price
$3.620
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
1k+ parts
$3.230
10k+ parts
$3.190
Vyrian
AZTECH Wire
$17.090
Optocoupler Transistor Outputs TLP631(GR,F) attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Toshiba
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
TLP631(GR,F) Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Continental Device India
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3103F
Idec
ROTARY SWITCH;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Daco Semiconductor
PS2801-1-F3-A-N
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6; Configuration: SINGLE; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 2500 V;
TLP290-4(GB-TP,E
Toshiba
Toshiba's TLP290-4(GB-TP,E is a 4-channel optocoupler with AC input-transistor output. It has a max forward current of 0.05A, min operating temp of -55°C, and max isolation voltage of 2500V. Ideal for applications requiring high current transfer ratio and surface mounting feature.
4N27
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; Minimum Operating Temperature: -55 Cel; Minimum Collector-emitter Breakdown Voltage: 30 V; Configuration: SINGLE; Maximum Forward Current: .06 A;
CNY17-3
Temic Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Additional Features: VDE APPROVED, UL RECOGNIZED, MICROPROCESSOR SYSTEM INTERFACE; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Nominal Current Transfer Ratio: 100 %; Maximum Isolation Voltage: 3750 V;
SFH6156-3-X001
Infineon Technologies
SFH6156-3-X001 by Infineon is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 5300V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio of 100%.
FOD817B300W
FOD817B300W by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C. With a collector-emitter breakdown voltage of 70V, it is ideal for applications requiring high isolation voltage up to 5000V, such as industrial control systems and power supplies.
4N25
Vishay Intertechnology
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Additional Features: UL RECOGNIZED;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A; Configuration: SINGLE; JESD-609 Code: e0;
HCNR200-300E
Agilent Technologies
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; Maximum Forward Voltage: 1.85 V; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
HMHA2801CR2
The Onsemi HMHA2801CR2 is a SINGLE optocoupler with a Max Forward Current of 0.05A and Min Collector-emitter Breakdown Voltage of 80V. With a Nominal Current Transfer Ratio of 50%, it is ideal for applications requiring high isolation voltage up to 2500V, such as industrial control systems.
OPI110C
Tt Electronics Plc
OPI110C by Tt Electronics Plc is a SINGLE Optocoupler Transistor Output with a Max Forward Current of 0.04 A and Max Isolation Voltage of 10 kV. It operates b/w -40 to 85°C, has a Min Current Transfer Ratio of 100%, and is ideal for applications requiring high voltage isolation and signal transmission in harsh environments.
TLP291(GR,SE(T
TLP291(GR,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has a min collector-emitter breakdown voltage of 80 V. This component is commonly used for electrical isolation and signal transmission applications.
TLP292-4(GB
Toshiba's TLP292-4(GB) is a 4-channel optocoupler with AC input-transistor output. It has a max forward current of 0.05A, operating temp range from -55 to 125°C, and isolation voltage of 3750V. Ideal for applications requiring high isolation voltage and reliable signal transmission in harsh environments.
CNY17-3M
Lite-on Technology
CNY17-3M by Lite-on Technology is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 5000V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio of 100%.
HCPL-181-000E
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Dark Current: 100 nA; Maximum Power Dissipation: .15 W; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
TLP281-4(GB-TP
Toshiba's TLP281-4(GB-TP is a 4-channel optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 2500V. With a nominal current transfer ratio of 100%, it operates b/w -55°C to 100°C, making it suitable for various industrial and electronic control systems.
4N25-X009T
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Current Transfer Ratio: 20 %; Maximum Forward Current: .06 A; Additional Features: UL RECOGNIZED; Maximum Power Dissipation: .15 W;
CNY65B
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .075 A; Maximum On State Current: .05 A; Minimum Current Transfer Ratio: 100 %;
HCPL-181-00BE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Configuration: SINGLE; JESD-609 Code: e3; Maximum Forward Current: .05 A;
TCET1100
Vishay Telefunken
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Nominal Current Transfer Ratio: 50 %; Maximum Dark Current: 100 nA; Configuration: SINGLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP627-4
Toshiba's TLP627-4 is a 4-channel optocoupler with Darlington output, built-in diode and resistor. It has a max forward current of 0.025A, operating temp range from -25 to 85°C, and isolation voltage of 5000V. Ideal for applications requiring high current transfer ratio and collector-emitter breakdown voltage up to 300V.
TLP620-2
Isocom
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Current Transfer Ratio: 50 %; No. of Elements: 2; Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.3 V;
Isocom Components
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN; JESD-609 Code: e3; Maximum Isolation Voltage: 5300 V; Maximum Dark Current: 100 nA; Maximum Operating Temperature: 100 Cel;
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Current Transfer Ratio: 50 %; Configuration: SEPARATE, 2 CHANNELS; Minimum Collector-emitter Breakdown Voltage: 55 V; Maximum On State Current: .05 A;
TLP620-4(GB)
Toshiba's TLP620-4(GB) is a 4-channel optocoupler with AC input-transistor output. It features 100% min current transfer ratio, 55V min collector-emitter breakdown voltage, and 5000V max isolation voltage. Ideal for applications requiring high electrical isolation and signal transmission in industrial settings.
TLP620-4GB
TLP620-4GB by Isocom Components is a 4-channel optocoupler with built-in diode, featuring AC input-transistor output. With a max forward current of 0.05A and isolation voltage of 5300V, it operates b/w -30°C to 100°C. Ideal for applications requiring high collector-emitter breakdown voltage and reliable current transfer ratio of 100%.
TLP-627-4(F)
Toshiba TLP-627-4(F) is a 4-channel optocoupler with Darlington output, built-in diode and resistor. It has a max forward current of 0.025A, operating temp range from -25 to 85°C, and isolation voltage of 5000V. Ideal for applications requiring high current transfer ratio and collector-emitter breakdown voltage up to 300V.
TLP627M(E
Toshiba's TLP627M(E is an optocoupler with Darlington output, built-in diode, and resistor. It has a max forward current of 0.05A and operates b/w -55°C to 110°C. With a collector-emitter breakdown voltage of 300V, it's ideal for applications requiring high isolation voltage up to 5000V.
TLP627MF(D4,E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Current Transfer Ratio: 1000 %; Maximum Operating Temperature: 110 Cel; Maximum Forward Current: .05 A; Additional Features: UL RECOGNIZED, VDE AAPROVED;
TLP627MF(TP4,E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Power Dissipation: .15 W; Nominal Current Transfer Ratio: 6000 %; Additional Features: UL RECOGNIZED; Maximum On State Current: .15 A;
TLP627F
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Dark Current: 200 nA; Minimum Operating Temperature: -25 Cel; Minimum Current Transfer Ratio: 1000 %; Nominal Current Transfer Ratio: 4000 %;
TLP627MF(E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Maximum Power Dissipation: .15 W; Nominal Current Transfer Ratio: 6000 %; Additional Features: UL RECOGNIZED;
TLP620-4(F)
Toshiba's TLP620-4(F) is a 4-channel optocoupler with AC input-transistor output. It has a max forward current of 0.02A, operating temp range from -25 to 85°C, and isolation voltage of 5000V. Ideal for applications requiring electrical isolation b/w high-voltage circuits and low-voltage components.
TLP627M(D4-TP1,E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Maximum Dark Current: 200 nA; Minimum Current Transfer Ratio: 1000 %; Additional Features: UL RECOGNIZED, VDE AAPROVED;
TLP621-2X
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum Power Dissipation: .15 W; Packing Method: TUBE; Maximum Operating Temperature: 100 Cel;
TLP627M(LF1,E
Toshiba's TLP627M(LF1,E is a Darlington output optocoupler with 0.05A max forward current, 300V min collector-emitter breakdown voltage, and 5000V max isolation voltage. Ideal for applications requiring high current transfer ratio, such as motor control circuits or power supply feedback systems.
TLP620-2(GB,F)
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 85 Cel; Maximum Dark Current: 100 nA; Minimum Operating Temperature: -25 Cel; Configuration: SEPARATE, 2 CHANNELS;
TLP621-2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Configuration: SEPARATE, 2 CHANNELS; Nominal Current Transfer Ratio: 50 %; Maximum Isolation Voltage: 5300 V; JESD-609 Code: e3;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Additional Features: UL RECOGNIZED; Maximum Forward Voltage: 1.3 V; Maximum Power Dissipation: .1 W; Minimum Operating Temperature: -25 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Configuration: SEPARATE, 2 CHANNELS; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .05 A; Maximum Forward Voltage: 1.3 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved