Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP627-2(TP1,F) optocoupler features 2 channels with built-in diode and resistor. With a max forward current of 0.025A, it offers a Darlington output type for applications requiring high isolation voltage up to 5000V. Ideal for use in environments ranging from -25°C to 85°C, this component has a collector-emitter breakdown voltage of 300V.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
AZTECH Wire
$6.024
Ampacity Inc.
$9.100
Semicontronic
$12.100
$11.798
$11.737
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Polypropylene is a high-quality dielectric material known for its excellent electrical insulation properties, making this capacitor reliable and durable.
Having 2 terminals allows for easy and secure connections in circuit applications.
PCB mounting makes installation convenient and efficient, saving space on the circuit board.
With a narrow negative tolerance, this capacitor ensures consistency and accuracy in its capacitance rating.
High maximum operating temperature allows this capacitor to withstand harsh environmental conditions without compromising performance.
Film capacitors are known for their stability, low losses, and high insulation resistance, making them a reliable choice for various applications.
Low minimum operating temperature ensures usability in a wide range of environments, including extreme cold conditions.
The compact height of this capacitor makes it suitable for applications where space is limited.
The slim width of this capacitor further enhances its suitability for space-constrained installations.
Being part of the FE series indicates a specific range or family of capacitors with similar characteristics, allowing for easy replacement and integration within a system.
The moderate length of this capacitor provides a balanced form factor for various circuit board layouts.
The positive tolerance ensures that the actual capacitance of this capacitor will not exceed 10%, ensuring precision in circuit design.
With a capacitance value of 10 uF, this capacitor is suitable for filtering, coupling, and energy storage applications.
High rated DC voltage of 1100 V allows this capacitor to handle high voltage applications with reliability and safety.
Optocoupler Transistor Outputs TLP627-2(TP1,F) attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Toshiba
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Isolation Voltage:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Terminal Finish:
TLP627-2(TP1,F) Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
1554216002
Molex
WIRE AND CABLE;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
1N4148W-T
Rectron
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
Laube Technology
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
PS2811-1-F3-A
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 40 V; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 100 nA;
SFH6186-4T
Vishay Intertechnology SFH6186-4T is a single optocoupler with max. forward current of 0.05A, operating temp. range -55 to 100°C, and isolation voltage of 5300V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer in harsh environments.
6N139
Marktech Optoelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 70 Cel; Maximum On State Current: .06 A; Minimum Operating Temperature: 0 Cel;
LTV-817S-B
Lite-on Technology
LTV-817S-B by Lite-on Technology is a SINGLE optocoupler with a max forward current of 0.05 A and min operating temperature of -30°C. With a collector-emitter breakdown voltage of 35 V, it's ideal for applications requiring high isolation voltage up to 5000 V, such as in industrial control systems.
PS2801-1-F3-A-N
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6; Configuration: SINGLE; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 2500 V;
4N25
Broadcom
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 2500 V; No. of Elements: 1; Maximum Operating Temperature: 100 Cel;
PC817X3NSZ1B
Sharp Corporation
Sharp Corporation's PC817X3NSZ1B is a SINGLE optocoupler with max. forward current of 0.05A, 400% transfer ratio, and 5000V isolation voltage. Ideal for applications requiring transistor output optocouplers in temperatures ranging from -30°C to 100°C.
4N35
Vishay Telefunken
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 100 %; Maximum Isolation Voltage: 3550 V; Maximum Dark Current: 50 nA; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
MOC223R2VM
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Voltage: 1.3 V; Maximum Isolation Voltage: 2500 V;
Quality Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Dark Current: 50 nA; Minimum Operating Temperature: -55 Cel; Additional Features: UL RECOGNIZED;
TLP291(BLL-TP,SE(T
Toshiba
Toshiba's TLP291(BLL-TP,SE(T optocoupler features a single transistor output with max. forward current of 0.05A and min. CTR of 200%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting in temp range -55 to 110°C.
PC357N4J000F
Sharp Corporation's PC357N4J000F is a SINGLE optocoupler with max. forward current of 0.05A, operating temp. range -30 to 100°C, and collector-emitter breakdown voltage of 80V. With a transfer ratio of 300%, it offers high isolation voltage of 3750V making it ideal for applications requiring reliable signal transmission in harsh environments.
SFH6186-5
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SINGLE; Maximum Dark Current: 200 nA; Maximum Isolation Voltage: 5300 V; Minimum Collector-emitter Breakdown Voltage: 55 V;
LTV-356TB
The Lite-on Technology LTV-356TB is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 3750V. With a fast response time of 0.000018s and low dark current of 100nA, it is suitable for surface mount configurations in various electronic circuits.
SFH6186-2T
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 55 V; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .05 A; Maximum Operating Temperature: 100 Cel;
TLP185(E(O
Toshiba's TLP185(E(O optocoupler features 0.05A max forward current, 110°C max operating temp, and 3750V max isolation voltage. Ideal for surface mount applications, with a min CTR of 50% and -55°C min operating temp.
4N35XSM
Isocom Components
The Isocom Components 4N35XSM is a single optocoupler transistor output with a max forward current of 0.06 A and a min operating temperature of -55°C. It is commonly used in applications requiring high isolation voltage, such as power supplies and industrial control systems.
CNY17-3
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Configuration: SINGLE; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V; Minimum Operating Temperature: -55 Cel;
ACPL-217-500E
Broadcom's ACPL-217-500E is a SINGLE optocoupler with 0.05A forward current, 110°C max temp, and 3000V isolation voltage. Ideal for applications requiring high reliability in harsh environments such as industrial automation and power supplies.
FOD2742BR2
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Current Transfer Ratio: 100 %; Maximum Operating Temperature: 85 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP627-4
Toshiba's TLP627-4 is a 4-channel optocoupler with Darlington output, built-in diode and resistor. It has a max forward current of 0.025A, operating temp range from -25 to 85°C, and isolation voltage of 5000V. Ideal for applications requiring high current transfer ratio and collector-emitter breakdown voltage up to 300V.
TLP620-2
Isocom
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Current Transfer Ratio: 50 %; No. of Elements: 2; Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.3 V;
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN; JESD-609 Code: e3; Maximum Isolation Voltage: 5300 V; Maximum Dark Current: 100 nA; Maximum Operating Temperature: 100 Cel;
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Current Transfer Ratio: 50 %; Configuration: SEPARATE, 2 CHANNELS; Minimum Collector-emitter Breakdown Voltage: 55 V; Maximum On State Current: .05 A;
TLP620-4(GB)
Toshiba's TLP620-4(GB) is a 4-channel optocoupler with AC input-transistor output. It features 100% min current transfer ratio, 55V min collector-emitter breakdown voltage, and 5000V max isolation voltage. Ideal for applications requiring high electrical isolation and signal transmission in industrial settings.
TLP620-4GB
TLP620-4GB by Isocom Components is a 4-channel optocoupler with built-in diode, featuring AC input-transistor output. With a max forward current of 0.05A and isolation voltage of 5300V, it operates b/w -30°C to 100°C. Ideal for applications requiring high collector-emitter breakdown voltage and reliable current transfer ratio of 100%.
TLP-627-4(F)
Toshiba TLP-627-4(F) is a 4-channel optocoupler with Darlington output, built-in diode and resistor. It has a max forward current of 0.025A, operating temp range from -25 to 85°C, and isolation voltage of 5000V. Ideal for applications requiring high current transfer ratio and collector-emitter breakdown voltage up to 300V.
TLP627M(E
Toshiba's TLP627M(E is an optocoupler with Darlington output, built-in diode, and resistor. It has a max forward current of 0.05A and operates b/w -55°C to 110°C. With a collector-emitter breakdown voltage of 300V, it's ideal for applications requiring high isolation voltage up to 5000V.
TLP627MF(D4,E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Current Transfer Ratio: 1000 %; Maximum Operating Temperature: 110 Cel; Maximum Forward Current: .05 A; Additional Features: UL RECOGNIZED, VDE AAPROVED;
TLP627MF(TP4,E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Power Dissipation: .15 W; Nominal Current Transfer Ratio: 6000 %; Additional Features: UL RECOGNIZED; Maximum On State Current: .15 A;
TLP627F
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Dark Current: 200 nA; Minimum Operating Temperature: -25 Cel; Minimum Current Transfer Ratio: 1000 %; Nominal Current Transfer Ratio: 4000 %;
TLP627MF(E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Maximum Power Dissipation: .15 W; Nominal Current Transfer Ratio: 6000 %; Additional Features: UL RECOGNIZED;
TLP620-4(F)
Toshiba's TLP620-4(F) is a 4-channel optocoupler with AC input-transistor output. It has a max forward current of 0.02A, operating temp range from -25 to 85°C, and isolation voltage of 5000V. Ideal for applications requiring electrical isolation b/w high-voltage circuits and low-voltage components.
TLP627M(D4-TP1,E
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Maximum Dark Current: 200 nA; Minimum Current Transfer Ratio: 1000 %; Additional Features: UL RECOGNIZED, VDE AAPROVED;
TLP621-2X
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum Power Dissipation: .15 W; Packing Method: TUBE; Maximum Operating Temperature: 100 Cel;
TLP627M(LF1,E
Toshiba's TLP627M(LF1,E is a Darlington output optocoupler with 0.05A max forward current, 300V min collector-emitter breakdown voltage, and 5000V max isolation voltage. Ideal for applications requiring high current transfer ratio, such as motor control circuits or power supply feedback systems.
TLP620-2(GB,F)
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 85 Cel; Maximum Dark Current: 100 nA; Minimum Operating Temperature: -25 Cel; Configuration: SEPARATE, 2 CHANNELS;
TLP621-2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Configuration: SEPARATE, 2 CHANNELS; Nominal Current Transfer Ratio: 50 %; Maximum Isolation Voltage: 5300 V; JESD-609 Code: e3;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Additional Features: UL RECOGNIZED; Maximum Forward Voltage: 1.3 V; Maximum Power Dissipation: .1 W; Minimum Operating Temperature: -25 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Configuration: SEPARATE, 2 CHANNELS; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .05 A; Maximum Forward Voltage: 1.3 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved