Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP3905(TPR,E(O is a single photodiode output optocoupler with 4 terminals. It operates b/w -25°C to 100°C, suitable for various applications. This surface mount device comes in TR packaging and is ideal for optoelectronic functions.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Corohmni
$0.472
Aztec Data Supply Inc.
$0.490
Ampacity Inc.
$14.100
AZTECH Wire
$19.537
Authorized Procurement Solutions
Continental Prestige Electronics
Perfect Parts
Argo Parts USA
Aranea Global
SINGLE - Being configured as a single unit makes this product easy to integrate into various electronic systems.
Photodiode Output Optocoupler - This innovative design allows for precise control and monitoring of light signals.
4 - With 4 terminals, this product offers flexibility in connectivity options for different applications.
100 °C - The high maximum operating temperature ensures reliable performance even in challenging environments.
25 °C - The low minimum operating temperature allows this product to be used in a wide range of temperature conditions.
TR, EMBOSSED, PLASTIC, 13 INCH - The convenient and durable packing method ensures safe transportation and storage of the product.
SURFACE MOUNT - The surface mount feature enables easy and secure installation of the product onto circuit boards.
Other Function Optoelectronics TLP3905(TPR,E(O attributes and parameters. Explore more Other Function Optoelectronics devices from Toshiba
Additional Features:
Configuration:
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
TLP3905(TPR,E(O Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRGCQ0805F10K
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
PSD312-15LM
Other Optoelectronics; Terminal Finish: TIN LEAD; JESD-609 Code: e0;
SRP00264H
OPTOELECTRONIC DEVICE; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;
DLP7000BFLP
Texas Instruments
DLP7000BFLP by Texas Instruments is a complex optoelectronic device with peak wavelength of 700nm. It operates b/w 10-65°C, with supply voltage range of 3-3.6V. Ideal for surface mount applications requiring high precision optical control.
IL350T
OPTOELECTRONIC DEVICE; Configuration: SINGLE; No. of Functions: 1; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 75 Cel;
PSD301-90XM
NSL-32SR2
Silonex
OPTOELECTRONIC DEVICE;
PSD303-90XM
HDSP-303G
Broadcom
7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN; JESD-609 Code: e3;
AQY272A
Panasonic
AQY272A by Panasonic is a SINGLE MOSFET SSR with 0.001 A control current, 0.05 A max forward current, and 2 A max on-state current. Ideal for DC input applications requiring high isolation voltage of 2500 V, operating b/w -40 to 85 °C temperatures in compact spaces at 3.7 mm height and 9.3 mm length.
SLP3118B51
Onsemi
SLP3118B51 by Onsemi features peak wavelength of 567nm, diffused lens type, and max reverse voltage of 3V. Ideal for optoelectronic applications with green-yellow color emission. Operates b/w -25 °C to 85°C, standing at a height of 5.5mm.
SPI208
SPI208 by Onsemi is a Transistor with 20V Max On State Voltage, 0.00003s Max Response Time, and -25 to 85 °C Operating Temp. Ideal for optoelectronic applications requiring THROUGH HOLE MOUNT with 3mm Gap Size.
SBH52413DC
SBM82314N
LG5180J
Other Optoelectronics; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Voltage: 5 V; Viewing Angle: 140 deg; Color At Wavelength: Green;
SPI226
SPI226 by Onsemi is a Transistor with 20V max on-state voltage, 0.006A max on-state current, and 0.00001s response time. Ideal for optoelectronic applications requiring THROUGH HOLE MOUNT with operating temp range of -25 °C to 80°C and 3mm gap size.
PSD303-12XM
MSD2012TXV
Other Optoelectronics; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: N/A; Peak Wavelength (nm): 635; Display Height: 4 mm; No. of Characters: 4;
AQY222R1SX
Panasonic AQY222R1SX is a SINGLE optoelectronic TRANSISTOR OUTPUT SSR with 0.0005 A control current and 0.05 A max forward current. It operates b/w -40 to 85 °C, has 1500 V isolation voltage, and 1.2 ohm max on-state resistance. Ideal for DC input applications requiring MOSFET output circuit type in compact spaces at 4.3 mm length and 2.1 mm height.
BPX84B
Other Optoelectronics; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel; Maximum Dark Current: 200 nA; Maximum Response Time: .000008 s;
SL1283
SL1283 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration. It operates b/w -25 °C to 70°C, emitting Red light at 700nm peak wavelength. With a display height of 10mm and max forward voltage of 2.4V, it's ideal for applications requiring compact, high-visibility numeric displays.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP3906(TPL,E(O
Toshiba
Toshiba's TLP3906 is a Photodiode Output Optocoupler with 4 terminals. It operates b/w -25°C to 100°C, suitable for various applications. Its surface mount feature and compact size make it ideal for electronic devices requiring optoelectronic isolation.
TLP3906(TPL,E
Other Optoelectronics;
TLP3906(E(O
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Minimum Operating Temperature: -25 Cel; Additional Features: UL APPROVED; Configuration: COMPLEX;
TLP3906(E
Toshiba's TLP3906(E is a complex optocoupler with photodiode output. It has 4 terminals, operates b/w -25°C to 100°C, and features surface mounting. Ideal for applications requiring optical isolation in temperature-sensitive environments.
TLP3906(TPR,E
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Minimum Operating Temperature: -25 Cel; Configuration: COMPLEX; Packing Method: TR, EMBOSSED, PLASTIC, 13 INCH;
TLP3906(TPR,E(O
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Configuration: COMPLEX; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 100 Cel;
TLP3905(E
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -25 Cel;
TLP3905(TPR,E
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Minimum Operating Temperature: -25 Cel; Configuration: SINGLE; Packing Method: TR, EMBOSSED, PLASTIC, 13 INCH;
TLP3905(TPL,E
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Minimum Operating Temperature: -25 Cel; Additional Features: UL RECOGNIZED; Configuration: SINGLE;
TLP3905(TPL,E(O
Toshiba's TLP3905(TPL,E(O is a SINGLE Photodiode Output Optocoupler with 4 terminals. It operates b/w -25°C to 100°C, suitable for various applications. This optoelectronic component is surface mountable and comes in TR packaging, making it ideal for electronic devices requiring optical isolation.
TLP3910(C20-TP,E
Toshiba's TLP3910(C20-TP,E is a Photodiode Output Optocoupler with 6 terminals. It operates b/w -40°C to 125°C, suitable for complex configurations in optoelectronics. Designed for surface mount, it comes in tape and reel packaging for easy integration.
TLP3910(D4-TP,E
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Packing Method: TAPE; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Operating Temperature: 100 Cel;
TLP3904(TP15F)
TLP3905(C20-TPR
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Minimum Operating Temperature: -25 Cel; Packing Method: TR, EMBOSSED, PLASTIC, 13 INCH; Configuration: SINGLE;
TLP3905(C20)
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED;
TLP3905(C20-TPR,E
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -25 Cel; Configuration: SINGLE;
TLP3905(C20-TPR,E(O
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Configuration: SINGLE; Packing Method: TR, EMBOSSED, PLASTIC, 13 INCH; Maximum Operating Temperature: 100 Cel;
TLP3902(TPR,U,F)
TLP3905(C20,E
Photodiode Output Optocoupler; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Maximum Operating Temperature: 100 Cel; Configuration: SINGLE; Minimum Operating Temperature: -25 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved