Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP187 is a single optocoupler with built-in diode and resistor, featuring a max forward current of 0.05A and Darlington output type. With an operating temperature range from -55°C to 110°C, it offers high isolation voltage of 3750V suitable for surface mount applications in various electronic circuits.
Median Price
$0.504
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Newark
1+ parts
$0.484
100+ parts
$0.262
1k+ parts
$0.198
10k+ parts
$0.155
Farnell
-
$0.379
$0.287
RS (Exports)
$0.525
Element14
$24.300
$19.720
Nova Conductors
$0.416
Chip Stock
Cyclops Electronics Ltd
Vyrian
ComSIT Distribution GmbH
Corohmni
$0.226
Continental Prestige Electronics
$0.253
$0.248
Argo Parts USA
$0.245
Aztec Data Supply Inc.
$0.270
Ampacity Inc.
$0.322
Modulus Dynamics
$0.351
$0.347
$0.337
Netroflash
$0.408
Advanced Electronics
$0.452
$0.430
Semicontronic
$0.700
$0.682
$0.679
RC Electronics
Authorized Procurement Solutions
Allen Electronics Distributors
Kepictronics
GreenTree Electronics
Perfect Parts
Robosynatics
Lucentia Tech
Speed Components Ltd (Excess)
Built-in diode and resistor simplify the design and help in saving space on the PCB.
Can handle relatively high forward current, making it suitable for various applications.
Darlington output optocoupler provides high current transfer ratio and better noise immunity.
Can operate in high-temperature environments without any issues.
Can operate in extremely low-temperature conditions, making it versatile for different scenarios.
Efficient power dissipation helps in maintaining the overall temperature of the component within safe limits.
High current transfer ratio ensures reliable signal transmission between input and output.
Low dark current reduces power consumption and improves overall performance.
High breakdown voltage provides protection against voltage spikes and surges.
Higher current transfer ratio means better signal amplification and accuracy.
High isolation voltage ensures safety and prevents signal interference in sensitive circuits.
Surface mount design allows for easy and secure installation on the PCB.
Low forward voltage drop minimizes power loss and improves efficiency.
Can handle high on-state current, making it suitable for switching applications.
Optocoupler Transistor Outputs TLP187 attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Toshiba
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
TLP187 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
EU2B-YS3203F
Idec
ROTARY SWITCH;
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Excel (Suzhou) Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
STMicroelectronics
CNY64
Vishay Intertechnology
Vishay Intertechnology's CNY64 is a SINGLE optocoupler with 0.075A forward current, 32V breakdown voltage, and 8200V isolation. Ideal for applications requiring high voltage protection and signal transmission in temperature range of -55 to 85°C.
4N25M
Lite-on Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 30 V; Additional Features: UL RECOGNIZED; No. of Elements: 1; Maximum Isolation Voltage: 2500 V; Minimum Operating Temperature: -55 Cel;
TLP291(GB-TP,E
Toshiba
Toshiba's TLP291(GB-TP,E is a single optocoupler with a max forward current of 0.05A and min transfer ratio of 100%. Ideal for applications requiring surface mounting, it offers high isolation voltage of 3750V and operates b/w -55 to 110°C.
TLP185(GB-TPL,SE
Toshiba's TLP185(GB-TPL,SE is a single configuration optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has an isolation voltage of 3750 V. This device is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
HMHA281R2
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Configuration: SINGLE; Nominal Current Transfer Ratio: 50 %; Minimum Collector-emitter Breakdown Voltage: 80 V; JESD-609 Code: e3;
TLP290(SE
Toshiba's TLP290(SE optocoupler features a max forward current of 0.05A, min operating temp of -55°C, and isolation voltage of 3750V. Ideal for AC input-transistor output applications with surface mounting feature.
HCPL-817-300E
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.4 V; Maximum Power Dissipation: .15 W;
TLP291-4(TP,E(T
Toshiba's TLP291-4(TP,E(T) is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -55°C to 110°C. Ideal for applications requiring high isolation voltage and low power dissipation in surface mount setups.
4N35
Everlight Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 5000 V; Maximum Power Dissipation: .15 W;
SFH690BT-3030
Vishay Intertechnology's SFH690BT-3030 is an Optocoupler Transistor Output with a max forward current of 0.05A and isolation voltage of 3750V. Ideal for applications requiring surface mounting, it operates b/w -55°C to 100°C, offering a min current transfer ratio of 170%.
MCT61
Isocom
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Dark Current: 100 nA; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 6 %;
CNY75C
Temic Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -55 Cel; Maximum Dark Current: 150 nA; Additional Features: VDE APPROVED; UL RECOGNIZED; MICROPROCESSOR SYSTEM INTERFACE; Maximum Isolation Voltage: 3750 V; Nominal Current Transfer Ratio: 160 %;
FODM121V
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 50 %; Maximum Forward Current: .05 A;
PS2801-1-A
Nec Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); No. of Elements: 1; Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e6;
Vishay Telefunken
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -55 Cel; Nominal Current Transfer Ratio: 160 %; Maximum Dark Current: 150 nA; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel;
FOD817ASD
FOD817ASD by Onsemi is a SINGLE optocoupler with a max forward current of 0.05 A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000 V. With a fast response time of 18 µs, it is suitable for surface mounting in various electronic circuits where low dark current and high collector-emitter breakdown voltage are essential.
4N25
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 50 %;
FODM121V by Onsemi is a single optocoupler with a max forward current of 0.05A and collector-emitter breakdown voltage of 80V. It operates b/w -40 to 100°C, making it suitable for applications requiring high isolation voltage up to 3750V, such as in power supplies and industrial control systems.
SFH6106-3T
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Power Dissipation: .15 W; No. of Elements: 1; Maximum Operating Temperature: 100 Cel; Maximum On State Current: .05 A;
H11G1M
The Onsemi H11G1M is a single optocoupler with a max forward current of 0.06A and Darlington output type. It operates b/w -40 to 100°C, has an isolation voltage of 7500V, and a min C-E breakdown voltage of 100V. Ideal for applications requiring high current transfer ratio and electrical isolation in through-hole mounting configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP185(GB-TPL,SE(T
Toshiba's TLP185(GB-TPL,SE(T optocoupler features a single transistor output with max. forward current of 0.05A and min. CTR of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature in temp range -55 to 110°C.
TLP185(GB-TPR,SE(T
Toshiba's TLP185(GB-TPR,SE(T optocoupler features a single transistor output with max. forward current of 0.05A and min. CTR of 100%. With a max. isolation voltage of 3750V, it is ideal for applications requiring high voltage protection in temperatures ranging from -55°C to 110°C.
TLP187(TPL,E(T
Toshiba's TLP187(TPL,E(T optocoupler features a Darlington output with 0.05A forward current, 300V breakdown voltage, and 3750V isolation. Ideal for applications requiring high current transfer ratio, such as industrial automation systems and power control circuits. Operating temperature ranges from -55°C to 110°C ensure reliability in various environments.
TLP185(GR-TPL,SE(T
TLP185(GR-TPL,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It has a min current transfer ratio of 100% and can operate in temperatures ranging from -55 to 110 °C. This surface mount device is commonly used for electrical isolation and signal transmission applications.
TLP185(GR,TPL,SE(T
TLP185(GR,TPL,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has an isolation voltage of 3750 V. It is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
TLP185(GR-TPR,SE(T
Toshiba's TLP185(GR-TPR,SE(T optocoupler features a single transistor output with max forward current of 0.02A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting in temperature range -55 to 110°C.
TLP185(SE
Toshiba's TLP185(SE optocoupler features 0.05A max forward current, 80V min collector-emitter breakdown voltage, and 3750V max isolation voltage. Ideal for applications requiring high voltage protection in a compact surface mount configuration.
TLP185(BLL-TL,SE(T
Toshiba's TLP185(BLL-TL optocoupler features a max forward current of 0.05A, min operating temperature of -55°C, and isolation voltage of 3750V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
TLP185(BL-TPL,SE(T
Toshiba's TLP185(BL-TPL,SE(T optocoupler features a max forward current of 0.05A and min operating temp of -55°C, ideal for single configuration applications. With a min current transfer ratio of 200%, it offers high isolation voltage of 3750V, making it suitable for surface mount setups requiring reliable transistor output optocouplers.
TLP184(GB-TPL,SE(T
Toshiba's TLP184(GB-TPL,SE(T) is a single optocoupler with AC input-transistor output. It offers a max forward current of 0.05A and min transfer ratio of 100%. With a max isolation voltage of 3750V, it is ideal for applications requiring high voltage protection in temperatures ranging from -55°C to 110°C.
TLP185(GB-TPL,E(O
Toshiba's TLP185(GB-TPL,E(O optocoupler features a max forward current of 0.02A, operating temperature range from -55 to 110°C, and isolation voltage up to 3750V. Ideal for applications requiring high collector-emitter breakdown voltage and reliable signal transfer in single configuration setups.
TLP185(Y,SE
Toshiba's TLP185(Y,SE optocoupler features a single transistor output with max forward current of 0.05A and min transfer ratio of 50%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature in temperature range -55 to 110°C.
TLP185(GB,E(O
TLP185(GB,E(O by Toshiba is a single optocoupler transistor output with a max forward current of 0.02 A. It operates in temperatures ranging from -55 to 110 °C and has a min collector-emitter breakdown voltage of 80 V. This component is commonly used for electrical isolation and signal transmission applications.
TLP181(GB)
Toshiba's TLP181(GB) is a single optocoupler with max forward current of 0.02A, ideal for applications requiring high isolation voltage up to 3750V. With a min current transfer ratio of 100%, it operates b/w -55°C to 110°C, making it suitable for various surface mount configurations.
TLP181(GB-TPL,F)
Toshiba's TLP181(GB-TPL,F) optocoupler has a max forward current of 0.05A, isolation voltage of 3750V, and min transfer ratio of 100%. Ideal for surface mount applications, it operates b/w -55°C to 110°C, making it suitable for various electronic devices.
TLP187(TPL,E
Toshiba's TLP187(TPL,E is a single optocoupler with built-in diode and resistor. It features a max forward current of 0.05A, Darlington output type, and 3750V isolation voltage. Ideal for applications requiring high collector-emitter breakdown voltage, such as industrial automation systems.
TLP185(GBSE(T
Toshiba's TLP185(GBSE(T optocoupler has a max forward current of 0.02A, operating temp range of -55 to 110°C, and isolation voltage of 3750V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
TLP185(GB,SE(T
Toshiba's TLP185(GB,SE(T optocoupler features a single transistor output with max. forward current of 0.02A and min. CTR of 100%. Ideal for applications requiring high isolation voltage up to 3750V, such as in power supplies and industrial control systems.
TLP185(SE(T
Toshiba's TLP185(SE(T optocoupler features 0.05A max forward current, 50% min current transfer ratio, and 3750V max isolation voltage. Ideal for applications requiring high voltage isolation in a compact surface mount configuration.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved