Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi MOCD207M is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A, operating temp range -40 to 100°C, and isolation voltage of 2500V. Ideal for applications requiring high isolation and signal transfer in harsh environments.
Median Price
$0.766
Lifecycle Status
Suppliers In-Stock
70
In-Stock Inventory
1k+
Rochester
1+ parts
$0.464
100+ parts
$0.436
1k+ parts
$0.394
10k+ parts
-
Arrow
$0.483
Distrelec
$0.806
$0.599
$0.512
Mouser Electronics
$0.830
$0.726
$0.404
Newark
$1.060
$0.574
$0.426
$0.414
Element14
$1.190
$0.642
$0.598
Farnell
$1.348
$0.639
$0.595
Chip1Stop
$2.970
$0.715
$0.463
$0.445
Adafruit Industries
$5.562
$5.284
Future Electronics
$0.220
Verical
Master Electronics
$0.592
$0.402
RS (Exports)
$0.630
$0.493
$0.480
DigiKey
Freelance Electronics
$0.190
$0.199
$0.188
DF Sales Co.
$0.320
Digiode
$0.441
TME
$0.940
$0.334
$0.312
Forefront Electronics and Design
$1.230
Nova Conductors
$1.397
Component Electronics Inc.
$1.540
$1.150
$1.000
Ozdisan Elektronik
$63.851
IBS Electronics
$0.372
$0.337
Chip Stock
NAC Semi
Vyrian
A2Z Electronics, Inc.
Component Sense
Micros
$0.443
Flip Electronics
Sunrise Surplus Inc.
PC Components Company LLC
Pegasus Components GmbH
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Velocity Electronics
LIBRA Elektronik GmbH
Atlantic Semiconductor
ComSIT Distribution GmbH
ComSIT USA
Cyclops Electronics Ltd
Partservice
$0.987
$0.429
Rebound Electronics
Flex Direct, LLC
Inventory MP
EMSNET
Bristol Electronics
Lakeland Logistics Inc
Classic Components Corporation
Odi Ramu Company
Connector Distribution Corp
Right Parts Inc.
Prism Electronics
EPE Components Inc.
Cogito LLC
A&K Electronics
Elcom Components
North Shore Components
Sea View Technologies
Holdelec - ElecDif-Pro
Sensible Micro Corp
HZD GmbH
Beltway Electronics Company
LWI Electronics Inc
Mil-Aero Solutions, Inc.
Semi Source
First Choice Components Inc.
Huijzer Components
Electronics Depot
Semicontronic
$0.212
$0.207
$0.206
Ampacity Inc.
Corphita
$0.418
Aztec Data Supply Inc.
$0.461
Argo Parts USA
$0.495
Modulus Dynamics
$0.623
Advanced Electronics
$0.671
$0.637
Continental Prestige Electronics
$1.180
$0.526
Aranea Global
$1.369
$1.314
Allen Electronics Distributors
$2.014
Perfect Parts
GreenTree Electronics
Infinite Electronics LLP (Excess)
Eastek
Authorized Procurement Solutions
Kepictronics
Lucentia Tech
$0.191
$0.187
Formix International (Excess)
SupplyDigital Components
Problanco Electronics
S.R.D Solutions
Robosynatics
TANS Electronics
Kulean Microsystems
iodParts Technologies Inc.
Supply Digital
Netroflash
$1.327
$1.299
Assy Fe
Futuretech Components
UHIMA Technologies
Corohmni
Speed Components Ltd (Excess)
Cyclops Electronics Ltd (Excess)
Having separate 2 channels allows for independent control of different circuits, providing flexibility in design and operation.
The maximum forward current of 0.06 A ensures reliable operation under load conditions without risking damage to the optocoupler.
Being a transistor output optocoupler makes it suitable for applications requiring high speed and high density optical isolation while interfacing with external circuits.
With a maximum operating temperature of 100°C, this optocoupler can withstand elevated temperatures, making it suitable for industrial applications.
The minimum operating temperature of -40°C ensures reliable performance even in cold environments, widening the range of applications this product can be used in.
The matte tin terminal finish provides a reliable and durable connection, enhancing the overall reliability and longevity of the product.
With a maximum power dissipation of 0.15 W, this optocoupler can effectively handle power dissipation within specified limits, ensuring stable operation.
The minimum current transfer ratio of 34% indicates efficient transfer of input signal to the output, ensuring accurate signal transmission.
The low maximum dark current of 50 nA minimizes leakage current when the optocoupler is in the off state, enhancing the overall performance and reliability.
Having 2 elements allows for dual-channel operation or redundancy, offering increased reliability and operational flexibility.
The tube packing method provides easy handling and storage of the optocoupler, ensuring protection during transportation and ease of inventory management.
The minimum collector-emitter breakdown voltage of 70 V ensures safe operation and protection against voltage spikes or surges.
The nominal current transfer ratio of 100% indicates accurate and precise signal transmission from input to output, ensuring high fidelity in signal reproduction.
With a maximum isolation voltage of 2500 V, this optocoupler provides high isolation between input and output circuits, ensuring safety and preventing signal interference.
The surface mounting feature allows for easy and secure installation of the optocoupler on PCBs, saving space and facilitating automated assembly processes.
The maximum forward voltage of 1.55 V ensures efficient operation with low power consumption, making it cost-effective and energy-efficient.
The maximum on-state current of 0.15 A allows for handling higher currents during operation, making it suitable for applications requiring a higher current capacity.
Optocoupler Transistor Outputs MOCD207M attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
MOCD207M Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
NSN
5962-01-581-1149, 5962015811149
NIIN
015811149
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Swampscott Electronics
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TLP181FT
Toshiba
Toshiba TLP181FT is a single optocoupler with max forward current of 0.02A, operating temp range -55 to 110°C, and isolation voltage of 3750V. Ideal for applications requiring transistor output optocouplers with high collector-emitter breakdown voltage and low dark current.
CNY17-3
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Maximum Dark Current: 100 nA; No. of Elements: 1;
H11G1SM
Harris Semiconductor
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Power Dissipation: .15 W; No. of Elements: 1; Maximum Forward Voltage: 1.5 V;
TLP291(GR,SE(T
TLP291(GR,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has a min collector-emitter breakdown voltage of 80 V. This component is commonly used for electrical isolation and signal transmission applications.
JANTX4N49U
Optek Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Isolation Voltage: 1000 V; Maximum On State Current: .05 A;
HCPL-181-00CE
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum On State Current: .05 A; Maximum Operating Temperature: 100 Cel;
TLP281-4(GB-TP)
Toshiba's TLP281-4(GB-TP) is a 4-element optocoupler with max. forward current of 0.05A, operating temp. range from -55 to 100°C, and max. isolation voltage of 2500V. Ideal for surface mount applications requiring high isolation and low power dissipation in electronic circuits.
FOD2712AR2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum Forward Current: .02 A; Configuration: SINGLE;
TLP185(BLL-TL,SE(T
Toshiba's TLP185(BLL-TL optocoupler features a max forward current of 0.05A, min operating temperature of -55°C, and isolation voltage of 3750V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
PC817XNNSZ1B
Sharp Corporation
Sharp Corporation's PC817XNNSZ1B is a SINGLE optocoupler with 0.05A forward current, 600% transfer ratio, and 5000V isolation voltage. Ideal for applications requiring high collector-emitter breakdown voltage of 80V, operating b/w -30 to 100°C.
TLP293-4(TPE(T
Toshiba's TLP293-4(TPE(T is a transistor output optocoupler with max. forward current of 0.05A, operating temp. range from -55 to 125°C, and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable optical coupling in industrial electronics.
HMHA2801R2V
Onsemi
HMHA2801R2V by Onsemi is a SINGLE optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and surface mounting feature.
GP2S700HCP
Sharp Corporation's GP2S700HCP is a SINGLE optocoupler with max forward current of 0.05A and min operating temp of -25°C. Ideal for applications requiring transistor output optocouplers, with max collector-emitter breakdown voltage of 35V and gold terminal finish.
TLP292-4(TPR,E
Toshiba's TLP292-4(TPR,E is a 4-channel optocoupler with max. forward current of 0.05A, ideal for AC input-transistor output applications. With max. operating temp of 125°C and min. isolation voltage of 3750V, it offers reliable performance in various circuits. Featuring surface mounting, this optocoupler has a min C-E breakdown voltage of 80V and low dark current at 80nA.
TLP521-4
Isocom Components
TLP521-4 by Isocom Components is a 4-channel optocoupler with a max forward current of 0.05A and a min collector-emitter breakdown voltage of 55V. With an operating temperature range from -30°C to 100°C, it offers high isolation voltage of 5300V, making it ideal for applications requiring reliable signal transmission in harsh environments.
H11G2M
The Onsemi H11G2M is a single optocoupler with a Darlington output, featuring a max forward current of 0.06A and min operating temperature of -40°C. With a collector-emitter breakdown voltage of 80V, it is ideal for applications requiring high isolation voltage up to 7500V, such as industrial control systems.
LTV-352T-TP
Lite-on Technology
LTV-352T-TP by Lite-on Technology is a single optocoupler with built-in diode and resistor. Features include 0.05A forward current, 110°C max temp, and 3750V isolation voltage. Ideal for applications requiring high current transfer ratio, low dark current, and fast response time in surface mount configurations.
FOD817DS
FOD817DS by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C, suitable for surface mount applications. It features a min current transfer ratio of 300%, max isolation voltage of 5000V, and fast response time of 18μs, making it ideal for high-speed signal transmission in industrial control systems.
CNY65B
Everlight Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .075 A; Maximum Dark Current: 200 nA; Configuration: SINGLE; Additional Features: UL RECOGNIZED;
CNY17-3-X007T
Siemens
Siemens CNY17-3-X007T is a SINGLE optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 5300V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and precise current transfer ratio.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MOCD207R2M
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 100 %; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A; No. of Elements: 2;
MOCD207R2M by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A, operating temperature range from -40 to 100°C, and isolation voltage of 2500V. Ideal for applications requiring high reliability in harsh environments such as industrial control systems and power supplies.
MOCD207M
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 2; Maximum Isolation Voltage: 2500 V; Nominal Current Transfer Ratio: 100 %; Maximum Forward Current: .06 A;
MOCD217R2M
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; JESD-609 Code: e3; Maximum Forward Current: .06 A; Configuration: SEPARATE, 2 CHANNELS;
The Onsemi MOCD217R2M is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06 A and min operating temperature of -40°C, making it suitable for applications requiring high isolation voltage up to 2500 V such as industrial control systems and power supplies.
MOCD217M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .15 W; Minimum Current Transfer Ratio: 100 %; Maximum On State Current: .15 A;
MOCD217M by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A, min operating temp of -40°C, and max isolation voltage of 2500V. Ideal for applications requiring high isolation and reliable signal transfer in harsh environments.
MOCD207R2VM
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL APPROVED, VDE APPROVED; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Operating Temperature: 100 Cel; Maximum Dark Current: 50 nA;
The Onsemi MOCD207R2VM is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A, operating temperature range from -40 to 100°C, and isolation voltage of 2500V. Ideal for applications requiring high isolation and signal transfer in electronic circuits.
MOCD223R2M
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .15 W; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 2500 V;
MOCD223R2M by Onsemi is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.06A, Darlington output type, and 1000% nominal current transfer ratio. Ideal for applications requiring high isolation voltage up to 2500V, such as in industrial control systems and power supplies.
MOCD207VM
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SEPARATE, 2 CHANNELS; JESD-609 Code: e3; Additional Features: UL APPROVED, VDE APPROVED; No. of Elements: 2;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; No. of Elements: 2; Minimum Current Transfer Ratio: 34 %; Minimum Operating Temperature: -40 Cel;
MOCD223M
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 500 %; Maximum Forward Voltage: 1.3 V; Nominal Current Transfer Ratio: 1000 %;
The Onsemi MOCD223M is a 2-channel optocoupler with Darlington output. It has a max forward current of 0.06A, min operating temp of -40°C, and max isolation voltage of 2500V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
MOCD207M_NL
MOCD207M_NL by Fairchild Semiconductor is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A and operates b/w -40 to 100°C. With a collector-emitter breakdown voltage of 70V, it is ideal for applications requiring high isolation voltage up to 2500V.
MOCD217R2VM
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 2500 V; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Dark Current: 50 nA; Configuration: SEPARATE, 2 CHANNELS;
MOCD217R2VM by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06 A and operates b/w -40 to 100°C. Ideal for applications requiring high isolation voltage, low dark current, and surface mounting feature.
MOCD213R2M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 100 %; Nominal Current Transfer Ratio: 100 %; Additional Features: UL APPROVED;
MOCD207R2M_NL
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: MATTE TIN; Minimum Collector-emitter Breakdown Voltage: 70 V; Additional Features: UL RECOGNIZED; Configuration: SEPARATE, 2 CHANNELS; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved