Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Authorized Procurement Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
Assy Fe
GreenTree Electronics
Motion Control ICs TB6526AF attributes and parameters. Explore more Motion Control ICs devices from Toshiba
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
TB6526AF Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Diodes Incorporated
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
HIP4020IBZT
Renesas Electronics
Renesas Electronics' HIP4020IBZT is a motion control IC with 20 terminals, operating voltage range of 2.5V to 15V, and output current up to 0.5A. Ideal for stepper motor control applications, it features a small outline package with dimensions of 12.8mm x 7.5mm x 2.65mm and can operate in temperatures ranging from -40°C to 85°C.
DRV8873SPWPR
Texas Instruments
DRV8873SPWPR by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 38V, and temperature grade suitable for automotive applications. It features a small outline package with heat sink, dual terminal position, and nickel palladium gold finish ideal for brush DC motor control. With a compact size of 7.8mm x 4.4mm and wide operating temperature range (-40°C to 125°C), it is designed for high-performance motion control systems in various industries.
VNHD7008AYTR
STMicroelectronics
STMicroelectronics' VNHD7008AYTR is a Motion Control IC with 36 terminals, suitable for BRUSH DC MOTOR CONTROL. It operates at 4-28V, delivering up to 51A output current. AEC-Q100 screening ensures reliability in automotive applications.
STGIB8CH60TS-E
STGIB8CH60TS-E by STMicroelectronics is a Motion Control IC with 26 terminals, operating voltage range of 13.5V to 18V, and temperature range of -40°C to 125°C. It is designed for AC motor control applications in automotive systems due to its compact rectangular package style and zig-zag terminal position.
TLE94112ELXUMA1
Infineon Technologies
TLE94112ELXUMA1 by Infineon is a Motion Control IC with 24 terminals, operating voltage of 3-5.5V, and max output current of 2A. Ideal for industrial applications like brush DC motor control due to its small size (8.65mm x 3.9mm), low profile design, and temp range of -40 to 85°C.
EMC2301-1-ACZL-TR
Microchip Technology's EMC2301-1-ACZL-TR is a Motion Control IC with 3.3V supply voltage, suitable for automotive applications. It features a small outline package, matte tin terminal finish, and operates b/w -40 to 125°C. Ideal for brush DC motor control with dual terminals and gull wing form factor.
TC647VPA
TC647VPA by Microchip Technology is a Motion Control IC with 8 terminals, operating at 3-5 V. It features a rectangular package style, matte tin terminal finish, and TS 16949 screening level. Ideal for Brushless DC Motor Controllers, it has a temperature range of 0-85°C and compact dimensions of 9.5mm x 7.62mm x 5.08mm.
L6228PDTR
L6228PDTR by STMicroelectronics is a Motion Control IC with 36 terminals, operating voltage of 48V, and max output current of 2.8A. It is a Stepper Motor Controller suitable for automotive applications due to its BCDMOS technology and wide temperature range (-40 to 150°C).
IKCM15H60GAXKMA2
Infineon's IKCM15H60GAXKMA2 is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 24A. Ideal for automotive applications due to its temp range of -40°C to 125°C and AC motor control capabilities in a compact rectangular package.
MC3479P
Motorola
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DRV8302DCAR
DRV8302DCAR by Texas Instruments is a Motion Control IC with 56 terminals, operating voltage of 6-60V, and max output current of 1.7A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish in NiPdAu.
MC34931SEK
Freescale Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8870DDAR
DRV8870DDAR by Texas Instruments is a motion control IC with 8 terminals and a supply voltage range of 6.5V to 45V. It offers a max output current of 3.6A, making it suitable for brush DC motor control applications in automotive environments. With a compact rectangular package style and low profile design, it can operate in temperatures ranging from -40°C to 125°C.
A4982SLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A4982SLPTR-T is a Motion Control IC with 24 terminals, operating voltage of 3-5.5V, and max output current of 2A. Ideal for stepper motor control applications due to its compact size, NMOS technology, and peak reflow temp of 260°C.
BD6290EFV-E2
ROHM
ROHM's BD6290EFV-E2 is a Motion Control IC with 24V Vsup, 0.8A output current, and bipolar technology. It has 2 functions in a small outline package suitable for stepper motor control applications. Operating temperature ranges from -25 to 85 °C.
AMIS30624C6244G
AMIS30624C6244G by Onsemi is a Motion Control IC with 20 terminals, operating voltage of 8-29V, and max output current of 0.8A. Ideal for automotive applications due to its temp range of -40 to 125°C and stepper motor control capabilities.
DRV8320RHRHAT
Texas Instruments DRV8320RHRHAT is a Motion Control IC with 40 terminals, operating voltage range of 6-60V. Ideal for automotive applications, it offers max output current of 1A and temp range of -40 to 125°C. Package style: CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE.
FNB81060T3
FNB81060T3 by Onsemi is a Motion Control IC with 25 terminals, operating temperature range of -40 to 125°C. It features a max output current of 20A and supports stepper motor control applications. This hybrid technology IC has a nominal voltage of 300V and can handle up to 400V max supply voltage for automotive use.
STSPIN840
STSPIN840 by STMicroelectronics is a Motion Control IC with 36V Vsup, suitable for BRUSH DC MOTOR CONTROL. It features 24 terminals in a SQUARE package style, with a max supply voltage of 45V. The chip carrier has a seated height of 1.1mm and operates b/w 7-45V Vsup range.
SLA7076MPR
Allegro MicroSystems' SLA7076MPR is a Motion Control IC with 23 terminals, operating voltage of 3-5.5V, and output current up to 1.5A. Ideal for stepper motor control applications, it has a temperature range of -20 to 85°C and peak reflow temp of 260°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TB6568KQ(O,8)
Toshiba
Toshiba's TB6568KQ(O,8) is a BICMOS Motion Control IC with 3A output current. Operating from -40 to 85°C, it supports 10-45V supply voltage for brush DC motor control applications. The IC features a flange mount package style and 7 terminals in a rectangular plastic/epoxy body.
TB6559FG(O,8,EL)
Toshiba's TB6559FG(O,8,EL) is a Motion Control IC with 24V supply voltage and 16 terminals. It operates b/w -30°C to 85°C, suitable for various applications requiring precise motion control. The IC features surface mount capability and TIN SILVER terminal finish for efficient assembly in diverse electronic devices.
TB6560AFG(O,8)
Toshiba's TB6560AFG(O,8) is a Motion Control IC with 64 terminals and BCDMOS technology. It operates at 4.5-5.5V, outputting up to 2.5A current. Ideal for stepper motor control applications due to its compact size and low power consumption.
TB6559FG,8,EL
Toshiba's TB6559FG,8,EL is a motion control IC with a rectangular package shape and 16 terminals. It operates at a nominal voltage of 24V and can handle a max output current of 2.5A. This IC is commonly used as a brushless DC motor controller in various applications.
TB6560AHQ(O,8)
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 25; Package Code: ZFM; Package Shape: RECTANGULAR; Surface Mount: NO;
TB6552FNG,C,8,EL
Toshiba's TB6552FNG is a Motion Control IC with 16 terminals, operating voltage of 2.7-5.5V, and output current up to 1A. Ideal for brush DC motor control applications due to its BCDMOS technology and compact rectangular package design.
TB6560AFG
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE; Surface Mount: YES;
TB6560AHQ
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 25; Package Code: HSIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TB6552FNG
Toshiba's TB6552FNG is a Motion Control IC with 16 terminals, operating voltage of 2.5-13.5V, and max output current of 1A. Ideal for brush DC motor control applications due to its BCDMOS technology, small outline package style, and dual terminal position design.
TB6559FG
BRUSH DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TB6559FG(O,EL)
Toshiba's TB6559FG(O,EL) is a motion control IC with 1 function. It operates at a nominal voltage of 24V and has a max output current of 2.5A. This IC is commonly used as a brush DC motor controller in various applications.
TB6584AFNG
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 30; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TB6549HQ
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 25; Package Code: SZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TB6513AF
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 64; Package Code: FQFP; Package Shape: SQUARE; Surface Mount: YES;
TB6526AFG
TB6526F
TB6504FG
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TB6515AP
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TB6528P
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved