Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JESD-30 Code: R-PSFM-T3; Terminal Form: THROUGH-HOLE; Maximum Drain-Source On Resistance: 3.8 ohm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
Power Field Effect Transistors (FET) 2SK1359(F) attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Toshiba
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Pulsed Drain Current (IDM):
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
2SK1359(F) Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0520LT1
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
Mde Semiconductor
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
SQJ409EP-T1_GE3
Vishay Intertechnology's SQJ409EP-T1_GE3 is a P-CHANNEL FET with 40V DS Breakdown Voltage, 150A IDM, and 0.007 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance.
JANTX2N6796
Infineon Technologies
JANTX2N6796 by Infineon Technologies is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 32A IDM, 75mJ EAS, and 0.195 ohm RDS(on). Operating from -55 to 150 °C, it has a max power dissipation of 25W in a CYLINDRICAL package.
BUK9M85-60EX
Nexperia
BUK9M85-60EX by Nexperia is a N-channel power FET with 60V DS breakdown voltage and 12.8A max drain current. Ideal for switching applications, it features a built-in diode, 0.085 ohm max on resistance, and 51A pulsed drain current. Suitable for surface mount with Gull Wing terminals in a small outline package style.
FDS2572
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; No. of Elements: 1; Transistor Application: SWITCHING;
BSS123
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: MATTE TIN; Operating Mode: ENHANCEMENT MODE;
FDS4675
FDS4675 by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 50A and ID of 11A, with 0.013 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE and can withstand temperatures from -55 to 175 °C.
IRF3415STRLPBF
IRF3415STRLPBF by Infineon is a N-CHANNEL FET with 150V DS Breakdown Voltage and 43A Max Drain Current. It is used for SWITCHING applications, featuring a built-in DIODE, 0.042 ohm Max RDS(on), and 150A IDM. The transistor operates in ENHANCEMENT MODE, has a GULL WING terminal form, and comes in a SMALL OUTLINE package style.
NTMFS5C628NLT1G
NTMFS5C628NLT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage, 900A IDM, and 0.0033 ohm RDS(on). It operates in Enhancement Mode and has a max power dissipation of 110W. Ideal for high-power applications requiring efficient switching capabilities.
IRF9640STRLPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Maximum Power Dissipation Ambient: 125 W; Minimum DS Breakdown Voltage: 200 V;
IRF7328TRPBF
Infineon's IRF7328TRPBF is a P-CHANNEL FET for SWITCHING applications. It features 30V DS Breakdown Voltage, 32A IDM, and 0.021 ohm RDS(on). With a max power dissipation of 2W and operating temperature up to 150°C, it's ideal for high-performance electronic systems requiring efficient power management in compact designs.
G3R75MT12K
Genesic Semiconductor
Power Field-Effect Transistors;
FQT7N10LTF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Minimum DS Breakdown Voltage: 100 V; Package Shape: RECTANGULAR;
FQD11P06TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 38 W; Package Body Material: PLASTIC/EPOXY; Maximum Time At Peak Reflow Temperature (s): 30;
IRF7319TRPBF
IRF7319TRPBF by Infineon is a Power FET with N- and P-channel types. It features 2 separate elements with built-in diode, ideal for switching applications. With a max pulsed drain current of 30A and low on-resistance of 0.029 ohm, it operates in enhancement mode for efficient performance.
IRF540SPBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 2; Avalanche Energy Rating (EAS): 230 mJ; Maximum Drain-Source On Resistance: .077 ohm;
IRF3205ZPBF
IRF3205ZPBF by Infineon is a N-CHANNEL Power FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 440A IDM, 250mJ EAS, and 0.0065 ohm RDS(on). The transistor operates in ENHANCEMENT MODE with a max power dissipation of 170W at 175°C.
FDD8424H
FDD8424H by Onsemi is a Power FET with N-CHANNEL and P-CHANNEL configurations. It has a 40V DS breakdown voltage, 55A max pulsed drain current, and 0.024 ohm max drain-source resistance. Ideal for switching applications, this MOSFET operates in enhancement mode with a max temperature of 150°C.
IRLR2908TRPBF
Infineon's IRLR2908TRPBF is a N-CHANNEL FET with 80V DS Breakdown Voltage and 150A IDM. Ideal for SWITCHING applications, it features 0.028 ohm RDS(ON) and 120W Pdiss. With ENHANCEMENT MODE operation and METAL-OXIDE SEMICONDUCTOR tech, it operates up to 175°C making it suitable for high-power electronics.
LND150N8-G
LND150N8-G by Microchip is a N-CHANNEL FET with 0.03A IDM, ideal for SWITCHING applications. Operating in DEPLETION MODE, it has a 1.6W power dissipation and 1000 ohm RDS(on). With a peak temperature of 260C, it's suitable for surface mount designs in various electronic systems.
FQD7P20TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 55 W; Peak Reflow Temperature (C): 260; Transistor Application: SWITCHING;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2SK1971
Renesas Electronics
The Renesas Electronics 2SK1971 is a N-CHANNEL Power FET with 500V DS Breakdown Voltage and 35A Drain Current. Ideal for SWITCHING applications, it features a max power dissipation of 200W and operates in ENHANCEMENT MODE. The transistor has a 0.23 ohm Drain-Source On Resistance and can handle up to 140A Pulsed Drain Current (IDM).
Hitachi
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Qualification: Not Qualified; Maximum Operating Temperature: 150 Cel;
Renesas Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Minimum DS Breakdown Voltage: 500 V; Maximum Pulsed Drain Current (IDM): 140 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2SK1976
ROHM
ROHM 2SK1976 is a N-CHANNEL FET with 450V DS breakdown voltage, ideal for SWITCHING applications. It features 5A max drain current, 1.4 ohm on-resistance, and 30W power dissipation. The transistor operates in ENHANCEMENT MODE with SILICON element material and TIN LEAD finish.
2SK1971-E
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; JESD-609 Code: e2; Qualification: Not Qualified;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Drain Current (Abs) (ID): 35 A; Minimum DS Breakdown Voltage: 500 V;
2SK1975
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Case Connection: ISOLATED; Terminal Position: SINGLE;
2SK1317-E
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 100 W; Transistor Application: SWITCHING; Terminal Finish: TIN BISMUTH;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 100 W; Maximum Drain-Source On Resistance: 12 ohm; Terminal Position: SINGLE;
2SK1518-E
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; Package Style (Meter): FLANGE MOUNT; Maximum Drain Current (Abs) (ID): 20 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; Package Shape: RECTANGULAR; Terminal Form: THROUGH-HOLE;
2SK1117
Toshiba
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Transistor Application: SWITCHING; Terminal Position: SINGLE; Maximum Drain Current (ID): 6 A;
2SK1118
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Finish: TIN LEAD; Package Shape: RECTANGULAR; Terminal Position: SINGLE;
2SK1170-E
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; Transistor Application: SWITCHING; No. of Terminals: 3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; Case Connection: DRAIN; Terminal Position: SINGLE;
2SK1180
Sanken Electric
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain-Source On Resistance: .6 ohm; Operating Mode: ENHANCEMENT MODE;
Allegro MicroSystems
Power Field-Effect Transistors; Surface Mount: NO; No. of Terminals: 3; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): FLANGE MOUNT;
2SK1186
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Package Shape: RECTANGULAR; Maximum Drain Current (ID): 9 A; Package Style (Meter): FLANGE MOUNT;
Power Field-Effect Transistors; Surface Mount: NO; Terminal Position: SINGLE; Qualification: Not Qualified; JEDEC-95 Code: TO-220AB; Package Style (Meter): FLANGE MOUNT;
2SK1187
Power Field-Effect Transistors; Surface Mount: NO; Terminal Position: SINGLE; Package Style (Meter): FLANGE MOUNT; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved