Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UCC284SDR-ADJEP by Texas Instruments is an adjustable negative single output LDO regulator with a max output voltage of 15V and max dropout voltage of 0.5V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Ampacity Inc.
$3.500
Semicontronic
$3.412
$3.395
Parana Technologies
$8.403
$9.035
DigiPath Technology Company
$9.253
$8.513
ChromeModa Solutions
$9.442
$7.742
IDEA Electronic Components Group
$8.970
$8.498
AZTECH Wire
$11.112
One Stop Electronics
$11.500
Corphita
Corohmni
The use of plastic/epoxy material makes the regulator lightweight and durable, making it suitable for various applications.
The low dropout voltage of 1.5 V ensures efficient power conversion and minimal power loss, making it ideal for low power applications.
Being surface mountable, this regulator is easy to install and saves space on the PCB, making it suitable for compact designs.
With a high maximum operating temperature of 150°C, this regulator can withstand harsh environmental conditions and ensure reliable performance.
The BICMOS technology used in this regulator offers a combination of the advantages of both bipolar junction transistors and CMOS technology, resulting in high performance and efficiency.
The rectangular package shape makes it easy to integrate this regulator into various electronic designs and provides a compact form factor.
The gull wing terminal form offers easy soldering and secure connections, ensuring reliable electrical contact for optimal performance.
With a low minimum operating temperature of -55°C, this regulator can operate in extreme cold environments without any issues.
The minimum output voltage of 1.25 V allows for fine-tuning of the output voltage, making this regulator versatile for different voltage requirements.
Having 8 terminals provides flexibility in connecting the regulator to the circuit and allows for additional functionality if needed.
The small outline package style saves space on the PCB and facilitates easy placement and routing of the regulator in the circuit.
The 1.27 mm terminal pitch allows for easy integration into standard PCB layouts and simplifies the assembly process.
The adjustable negative single output LDO regulator provides precise voltage regulation, making it suitable for applications where stable and accurate voltage supply is essential.
The dual terminal position offers flexibility in mounting options and allows for easy connection to the circuit, enhancing ease of use.
With a maximum output voltage of 15 V, this regulator can cater to a wide range of voltage requirements, making it versatile for various applications.
The maximum seated height of 1.75 mm ensures a low profile design, making it suitable for applications where space constraints are a concern.
The compact width of 3.9 mm allows for efficient space utilization on the PCB and facilitates compact and streamlined circuit designs.
With a maximum output current of 0.5 A, this regulator can deliver sufficient current for powering a variety of electronic components, making it versatile for different applications.
The length of 4.9 mm contributes to the compact size of the regulator, making it suitable for space-constrained designs while offering reliable performance.
Adjustable Regulators - Negative Single Output LDO UCC284SDR-ADJEP attributes and parameters. Explore more Adjustable Regulators - Negative Single Output LDO devices from Texas Instruments
Maximum Dropout Voltage-1:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
UCC284SDR-ADJEP Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
Daco Semiconductor
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Tak Cheong Electronics Holdings
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Lite-on Semiconductor
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LT3015IT#PBF
Analog Devices
LT3015IT#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output voltage of 29.5V and max output current of 1.5A. Operating temperature ranges from -40 °C to 125°C, making it suitable for various applications requiring precise voltage regulation in challenging environments. The package style is flange mount with a rectangular shape and through-hole terminal form, providing ease of installation and reliability in electronic circuits.
LT3091MPDE#TRPBF
LT3091MPDE#TRPBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 1.5A and dropout voltage of 0.36V. Ideal for applications requiring precise voltage regulation in compact spaces, this device operates at temperatures ranging from -55 to 150°C, making it suitable for various electronic systems.
LT3015EDD#PBF
Linear Technology
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Dropout Voltage-1: .5 V; Operating Temperature (TJ-Max): 125 Cel;
TPS72301DBVTG4
TPS72301DBVTG4 by Texas Instruments is an adjustable negative single output LDO regulator with a max output current of 0.2A and a nominal output voltage of 2.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM2991T
National Semiconductor
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-609 Code: e0; Terminal Position: SINGLE;
LT1964EDD#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Seated Height: .8 mm; Adjustability: ADJUSTABLE;
LT1185MK#TRPBF
LT1185MK#TRPBF by Analog Devices is an Adjustable Negative Single Output LDO Regulator with 3A max output current and 25V max output voltage. It operates in a wide temperature range from -55 °C to 150°C, making it suitable for various industrial applications requiring precise voltage regulation. The package body material is metal, ensuring durability and reliability in harsh environments.
LT3091IDE#TRPBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 14; Package Code: HVSON; Terminal Form: NO LEAD; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-N14;
RHFL7913KPA-02Q
STMicroelectronics
RHFL7913KPA-02Q by STMicroelectronics is an adjustable negative LDO regulator with a max output of 9.5V and current of 1A, suitable for harsh environments. It operates from -55 °C to 125 °C and withstands up to 300k Rad(Si) total dose. Ideal for space applications requiring robust performance.
MIC5270YM5-TR
Micrel
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; JESD-609 Code: e4; Maximum Seated Height: 1.45 mm;
LT1175IS8
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; No. of Outputs: 1;
LM2991SX
LM2991SX by Texas Instruments is an adjustable negative single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LT3091HR#PBF
LT3091HR#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 1.5A and a max dropout voltage of 0.42V. This bipolar technology regulator operates in temperatures ranging from -40°C to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT1964IS5-SD#PBF
LT1964IS5-SD#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 0.2A and a max dropout voltage of 0.49V. It is designed for applications requiring precise voltage regulation in a compact package, suitable for surface mount assembly in various electronic devices.
LT3090IDD#TRPBF
LT3090IDD#TRPBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 0.6A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3091MPFE#PBF
LT3091MPFE#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 1.5A and a max dropout voltage of 0.36V. It operates in temperatures ranging from -55 to 150 °C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT1185CT
LT1185CT by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 3A and max output voltage of 25V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, featuring a Gull Wing terminal form and PLASTIC/EPOXY body material for surface mounting convenience.
LT1185MK#TR
LT1185MK#TR by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 3A and a max dropout voltage of 1V. It operates in temperatures ranging from -55 °C to 150°C, making it suitable for various industrial applications requiring precise voltage regulation. The package style is flange mount with a round shape and wire terminal form, providing ease of installation and reliability in diverse electronic systems.
LT3091EFE#PBF
LT3091EFE#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 1.5A and a max dropout voltage of 0.36V. This bipolar technology regulator operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT1175CS8
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; JESD-609 Code: e0; Moisture Sensitivity Level (MSL): 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC284DP-ADJ
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; No. of Functions: 1;
Rochester Electronics
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Technology: BCD; Qualification Status: Not Qualified;
Unitrode
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Dropout Voltage-1: .5 V; Operating Temperature (TJ-Min): -55 Cel;
UCC284DP-ADJG4
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Terminal Pitch: 1.27 mm;
UCC284-ADJDP
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Dropout Voltage-1: .5 V; No. of Functions: 1;
UCC284DP-ADJTR
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Output Current-1: .5 A; Package Equivalence Code: SOP8,.25;
UCC284DPTR-ADJ
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Package Equivalence Code: SOP8,.25;
UCC284DPTR-ADJG4
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Operating Temperature (TJ-Max): 150 Cel;
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Maximum Output Current-1: .5 A;
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Dropout Voltage-1: .5 V; Terminal Position: DUAL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved